التفاصيل البيبلوغرافية
| العنوان: |
Effect of aspect ratio on the metal flow behaviour during forming process: A numerical simulation approach |
| المؤلفون: |
Japheth Obiko, Brendon Shongwe, Nicholas Malatji, Michael Bodunrin, Desmond Klenam |
| المصدر: |
Scientific African, Vol 25, Iss , Pp e02265- (2024) |
| بيانات النشر: |
Elsevier, 2024. |
| سنة النشر: |
2024 |
| المجموعة: |
LCC:Science |
| مصطلحات موضوعية: |
Forging simulation, Effective stress, Metal flow, Deform™ 3D, Effective strain, Science |
| الوصف: |
This paper presents results on the effect of aspect ratio on the flow stress of 42CrMo4 steel using Deform™ 3D Version 11 simulation software. The FEM simulation process conditions were upsetting temperature of 1000 °C and 10 s⁻¹ strain rate. The sample aspect ratios (height/diameter) varied within commonly used ranges during conventional Gleeble experimentations. The aspect ratio did not affect the flow stress behaviour during forming. Generally, the forming conditions influence the flow stress-strain field and distribution behaviour, causing inhomogeneous deformation. A negligible effect of aspect ratio on typical industrial forging process is only attainable between 1.0 and 2.0. The implications of the results for industrial forging are elucidated. |
| نوع الوثيقة: |
article |
| وصف الملف: |
electronic resource |
| اللغة: |
English |
| تدمد: |
2468-2276 |
| Relation: |
http://www.sciencedirect.com/science/article/pii/S2468227624002114; https://doaj.org/toc/2468-2276 |
| DOI: |
10.1016/j.sciaf.2024.e02265 |
| URL الوصول: |
https://doaj.org/article/f783f21bf2d042bdaa8a3eb9a1867d36 |
| رقم الانضمام: |
edsdoj.f783f21bf2d042bdaa8a3eb9a1867d36 |
| قاعدة البيانات: |
Directory of Open Access Journals |
Full Text Finder