التفاصيل البيبلوغرافية
| العنوان: |
Joint denoising method of seismic velocity signal and acceleration signals based on independent component analysis |
| المؤلفون: |
Guangde Zhang, Huaibang Zhang, Li You, Yuyong Yang, Huailai Zhou, Bohan Zhang, Wujin Chen, Liyuan Liu |
| المصدر: |
Frontiers in Earth Science, Vol 11 (2023) |
| بيانات النشر: |
Frontiers Media S.A., 2023. |
| سنة النشر: |
2023 |
| المجموعة: |
LCC:Science |
| مصطلحات موضوعية: |
denoising, velocity signal, acceleration signal, independent component analysis, Kalman filter, Science |
| الوصف: |
The signal-to-noise ratio (SNR) of seismic data is the key to seismic data processing, and it also directly affects interpretation of seismic data results. The conventional denoising method, independent variable analysis, uses adjacent traces for processing. However, this method has problems, such as the destruction of effective signals. The widespread use of velocity and acceleration geophones in seismic exploration makes it possible to obtain different types of signals from the same geological target, which is fundamental to the joint denoising of these two types of signals. In this study, we propose a joint denoising method using seismic velocity and acceleration signals. This method selects the same trace of velocity and acceleration signal for Independent Component Analysis (ICA) to obtain the independent initial effective signal and separation noise. Subsequently, the obtained effective signal and noise are used as the prior information for a Kalman filter, and the final joint denoising results are obtained. This method combines the advantages of low-frequency seismic velocity signals and high-frequency and high-resolution acceleration signals. Simultaneously, this method overcomes the problem of inconsistent stratigraphic reflection caused by the large spacing between adjacent traces, and improves the SNR of the seismic data. In a model data test and in field data from a work area in the Shengli Oilfield, the method increases the dominate frequency of the signal from 20 to 40 Hz. The time resolution was increased from 8.5 to 6.8 ms. The test results showed that the joint denoising method based on seismic velocity and acceleration signals can better improve the dominate frequency and time resolution of actual seismic data. |
| نوع الوثيقة: |
article |
| وصف الملف: |
electronic resource |
| اللغة: |
English |
| تدمد: |
2296-6463 |
| Relation: |
https://www.frontiersin.org/articles/10.3389/feart.2023.1178861/full; https://doaj.org/toc/2296-6463 |
| DOI: |
10.3389/feart.2023.1178861 |
| URL الوصول: |
https://doaj.org/article/6a115e5afe7f40d5a8e85b14e25fe49d |
| رقم الانضمام: |
edsdoj.6a115e5afe7f40d5a8e85b14e25fe49d |
| قاعدة البيانات: |
Directory of Open Access Journals |
Full Text Finder