Academic Journal

Utilization of Polypropylene Film as an Adhesive to Prepare Formaldehyde-free, Weather-resistant Plywood-like Composites: Process Optimization, Performance Evaluation, and Interface Modification

التفاصيل البيبلوغرافية
العنوان: Utilization of Polypropylene Film as an Adhesive to Prepare Formaldehyde-free, Weather-resistant Plywood-like Composites: Process Optimization, Performance Evaluation, and Interface Modification
المؤلفون: Wei Song, Wenbang Wei, Xuefei Li, Shuangbao Zhang
المصدر: BioResources, Vol 12, Iss 1, Pp 228-254 (2016)
بيانات النشر: North Carolina State University, 2016.
سنة النشر: 2016
المجموعة: LCC:Biotechnology
مصطلحات موضوعية: Wood-based composite, Plywood, Adhesive, Polypropylene film, Formaldehyde emission, Weather-resistance, Hot-pressing, Physical-mechanical property, Interface compatibility, Biotechnology, TP248.13-248.65
الوصف: To develop formaldehyde-free wood-based composites, plywood-like composites (WV/PPF) were prepared using wood veneer (WV) with polypropylene film (PPF) as a novel formaldehyde-free, water-resistant adhesive. To prepare WV/PPF, the effects of hot-pressing conditions (temperature, 165 to 195 °C; pressure, 0.9 to 1.3 MPa; duration, 40 to 70 s/mm; and adhesive dosage between adjacent WVs, 100 to 200 g/m2) were investigated. Results showed that conditions at 180 °C, 0.9 MPa, 70 s/mm, and 150 g/m2 gave WV/PPF desirable physical-mechanical properties. Then, WV/PPF was compared with plywood-like composites using, respectively, polyethylene film (PEF), urea-formaldehyde resin (UFR), and phenol-formaldehyde resin (PFR) as adhesives. Results showed that the physical-mechanical properties of WV/PPF were favored over WV/PEF and WV/UFR, and were comparable to those of WV/PFR. Maleic anhydride grafted polypropylene (MAPP) or γ-aminopropyltriethoxysilane (APTES) surface modification of WV was performed to enhance the interface compatibility of WV/PPF. Results showed that the physical-mechanical properties of modified WV/PPF were favored over those of WV/PFR; MAPP modification was better for shear properties, while APTES modification was better for dimensional stability and flexural properties. Overall, the environmental and technological benefits demonstrated the potential of WV/PPF as a novel construction and building material.
نوع الوثيقة: article
وصف الملف: electronic resource
اللغة: English
تدمد: 1930-2126
Relation: http://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_12_1_228_Song_Utilization_Polypropylene_Film_Adhesive; https://doaj.org/toc/1930-2126
DOI: 10.15376/biores.12.1.228-254
URL الوصول: https://doaj.org/article/46f762fe8c3a45af946a935f81b0fd7b
رقم الانضمام: edsdoj.46f762fe8c3a45af946a935f81b0fd7b
قاعدة البيانات: Directory of Open Access Journals
الوصف
تدمد:19302126
DOI:10.15376/biores.12.1.228-254