التفاصيل البيبلوغرافية
| العنوان: |
Electrical Resistivity and Strength Parameters of Prismatic Mortar Samples Based on Standardized Sand and Lunar Aggregate Simulant |
| المؤلفون: |
Petr Lehner, Petr Konečný, Jacek Katzer |
| المصدر: |
Buildings, Vol 12, Iss 4, p 423 (2022) |
| بيانات النشر: |
MDPI AG, 2022. |
| سنة النشر: |
2022 |
| المجموعة: |
LCC:Building construction |
| مصطلحات موضوعية: |
compressive strength, lunar aggregate simulant, electrical resistivity, NDT, Building construction, TH1-9745 |
| الوصف: |
In situ resource utilization (ISRU) and automation are necessary. The logical first step of intention is to focus on our neighbor, the Moon, first. This work aims to expand our knowledge of the lunar aggregate simulant (LAS) based on ilmenite rock, which is available in Central Europe. Prismatic mortar samples were prepared based on standard sand and LAS. The measurements were conducted using several different destructive (DT) strength related tests and non-destructive (NDT) electrical resistivity measurement methods. The results were compared, and mutual correlation was evaluated. Finally, the ratio between volumetric (bulk) and surface resistivity tested on prismatic samples is presented. The results showed an average ratio of 7.19 for sand and 7.97 for ilmenite. The results show the potential feasibility of evaluating the properties of non-standard composite materials using durability-related NDT. The experimental testing presented that combines the DT and NDT methods in one sample represents a potential streamlining of the processes of future testing. |
| نوع الوثيقة: |
article |
| وصف الملف: |
electronic resource |
| اللغة: |
English |
| تدمد: |
2075-5309 |
| Relation: |
https://www.mdpi.com/2075-5309/12/4/423; https://doaj.org/toc/2075-5309 |
| DOI: |
10.3390/buildings12040423 |
| URL الوصول: |
https://doaj.org/article/34398f3d18fc457d8db559f8a6dc4cda |
| رقم الانضمام: |
edsdoj.34398f3d18fc457d8db559f8a6dc4cda |
| قاعدة البيانات: |
Directory of Open Access Journals |
Full Text Finder