Academic Journal
Effects of Eugenol and Cineol Compound on Diffusion Burning Rate Characteristics of Crude Coconut Oil Droplet
| العنوان: | Effects of Eugenol and Cineol Compound on Diffusion Burning Rate Characteristics of Crude Coconut Oil Droplet |
|---|---|
| المؤلفون: | Helen Riupassa, Suyatno Suyatno, Hendry Y. Nanlohy, Andi Sanata, Trismawati Trismawati, Rachmat Subagyo, Satworo Adiwidodo, Muhammad Akhlis Rizza, Masaki Yamaguchi, Takuya Tomidokoro, Selcuk Sarikoc |
| المصدر: | Automotive Experiences, Vol 6, Iss 1 (2023) |
| بيانات النشر: | Universitas Muhammadiyah Magelang, 2023. |
| سنة النشر: | 2023 |
| المجموعة: | LCC:Mechanical engineering and machinery LCC:Mechanics of engineering. Applied mechanics |
| مصطلحات موضوعية: | Droplet combustion, Burning rate, Crude coconut oil, Eugenol, Cineol, Mechanical engineering and machinery, TJ1-1570, Mechanics of engineering. Applied mechanics, TA349-359 |
| الوصف: | The burning rate of coconut oil droplets has been investigated experimentally by adding bio-additives of clove oil and eucalyptus oil. Tests were carried out with single droplets suspended on thermocouples at room atmospheric pressure, and room temperature and ignited with a hot wire. The addition of clove oil and eucalyptus oil as bio-additives into coconut oil was 100 ppm and 300 ppm, respectively. The droplet combustion method was chosen to increase the contact area between the air and fuel so that the reactivity of the fuel molecules increases. The results showed that the eugenol compounds contained in clove oil and cineol compounds in eucalyptus oil were both aromatic, and had an unsymmetrical carbon chain geometry structure. Furthermore, this factor can potentially accelerate the occurrence of effective collisions between fuel molecules. Therefore the fuel is combustible, as evidenced by the increased burning rate, where the results show that without bio-additives, the burning rate of crude coconut oil (CCO) is about 0.7 seconds. These results are 0.15 to 0.2 seconds slower than CCO with bio-additive, which is around 0.55 to 0.6 seconds. Moreover, from the observations, it was found that the highest burning rate was achieved in both bio-additives with a concentration of 300 ppm. |
| نوع الوثيقة: | article |
| وصف الملف: | electronic resource |
| اللغة: | English Indonesian |
| تدمد: | 2615-6202 2615-6636 |
| Relation: | https://journal.unimma.ac.id/index.php/AutomotiveExperiences/article/view/8150; https://doaj.org/toc/2615-6202; https://doaj.org/toc/2615-6636 |
| DOI: | 10.31603/ae.8150 |
| URL الوصول: | https://doaj.org/article/32db129b823c4626bb07c2529b04e793 |
| رقم الانضمام: | edsdoj.32db129b823c4626bb07c2529b04e793 |
| قاعدة البيانات: | Directory of Open Access Journals |
| تدمد: | 26156202 26156636 |
|---|---|
| DOI: | 10.31603/ae.8150 |