Academic Journal

Effect of carbon-fluorine additive to flux on the structure, defective substructure and fracture surface of electric arc surfacing of low-carbon wire

التفاصيل البيبلوغرافية
العنوان: Effect of carbon-fluorine additive to flux on the structure, defective substructure and fracture surface of electric arc surfacing of low-carbon wire
المؤلفون: V.E. Gromov, A.B. Yuriev, R.E. Kryukov, N.A. Kozyrev, Yu.F. Ivanov, Yu.A. Shliarova, A.P. Semin
المصدر: Journal of Materials Research and Technology, Vol 18, Iss , Pp 2104-2111 (2022)
بيانات النشر: Elsevier, 2022.
سنة النشر: 2022
المجموعة: LCC:Mining engineering. Metallurgy
مصطلحات موضوعية: Surfacing, Structure, Phase composition, Dislocations, Fracture surface, Additive to flux, Mining engineering. Metallurgy, TN1-997
الوصف: By the methods of transmission and scanning electron microscopy the effect of a carbon-fluorine containing additive in a flux of a silicomanganese slag with a low content of manganese oxide on the structural-phase state, defect substructure and fracture surface of an electric arc surfacing of low-alloy steel is investigated. A quantitative analysis of the parameters of structure, phase composition, dislocation substructure of the surfacing with the additive into a flux and without it is made. It is shown that the deposited metal with the additive into a flux has a layer surface structure. It is detected that a predominant fracture mechanism is a ductile fracture with a formation of the pit structure of the fracture. The areas of a quasibrittle fracture are much more rarely detected. The main structural constituent of the deposited metal are the α-phase grains. The second structural constituent of the surfacing is the pearlite grains of lamellar morphology whose relative content in the surfacing with the carbon-fluorine containing additive to a flux is three-fold higher than in the surfacing to a flux without it. In most cases the α-phase grains are fragmentary. The particles of iron carbide of a round shape of 20–80 nm in size are revealed in the α-phase grains of the deposited metal with the carbon-fluorine containing additive to a flux. The metal of the surfacing with the additive to a flux is characterized by the higher values of scalar and excess dislocation density and the amplitude of curvature-torsion of a crystal lattice.
نوع الوثيقة: article
وصف الملف: electronic resource
اللغة: English
تدمد: 2238-7854
Relation: http://www.sciencedirect.com/science/article/pii/S2238785422004070; https://doaj.org/toc/2238-7854
DOI: 10.1016/j.jmrt.2022.03.100
URL الوصول: https://doaj.org/article/26d318035656473b8be3268bc956133b
رقم الانضمام: edsdoj.26d318035656473b8be3268bc956133b
قاعدة البيانات: Directory of Open Access Journals
الوصف
تدمد:22387854
DOI:10.1016/j.jmrt.2022.03.100