Academic Journal
EVALUATING BEHAVIOR OF HIGH-RISE STRUCTURES EQUIPPED WITH IMPACT DAMPER UNDER NEAR- AND FAR-FIELD EARTHQUAKES
العنوان: | EVALUATING BEHAVIOR OF HIGH-RISE STRUCTURES EQUIPPED WITH IMPACT DAMPER UNDER NEAR- AND FAR-FIELD EARTHQUAKES |
---|---|
المؤلفون: | S.M. Zahrai, A.R. heisami |
المصدر: | مهندسی عمران شریف, Vol 34.2, Iss 4.1, Pp 27-35 (2019) |
بيانات النشر: | Sharif University of Technology, 2019. |
سنة النشر: | 2019 |
المجموعة: | LCC:Building construction |
مصطلحات موضوعية: | non-linear damper, impact damper, mdof system, sap2000 software, Building construction, TH1-9745 |
الوصف: | Impact damper is considered as a passive control system. Experimental and analytical studies have shown that this group of non-linear dampers has a better performance than linear vibratory neutralizers in terms of reducing structural vibrations. The main factor influencing this type of damper in controlling vibrations is that the small forces, created by moving masses of impact dampers reduce sharp vibrations by creating disruption in the oscillation range of the structure.So far, modeling of the impact damper has been conducted solely through MATLAB software. Naturally, the functional aspects of this software are limited in research and development aspects compared to the common programs such as SAP2000 and ETABS. In this study, using SAP2000 software in modeling impact dampers, relatively tall building models are used to compare the performances of impact damper in high-rise buildings, and the seismic performance of such buildings with impact damper is investigated. The purpose of this study is to evaluate the performance of impact damper in tall buildings and to determine the best placement of damper in reducing the amplitude response of the system under vibration.In order to achieve favorable results for tall buildings under seismic vibration, both near- and far-field earthquakes are selected and applied to 10- and 25-story steel buildings. The analysis used in this study is of nonlinear time-history kind, and the design of structural elements is performed considering AISC360-10 Code requirements. One of the main results of this study is the decreased amplitude response of 10 and 25-story steel buildings under vibration due to the placement of impact damper on the roof up to 14\% and 16\% under far- and near-field earthquakes, respectively. It is also observed that if the height and number of openings increase, the effect of the placement of impact damper in the middle floors will become closer to the placement of damper on the roof due to the combination of vibration modes. |
نوع الوثيقة: | article |
وصف الملف: | electronic resource |
اللغة: | Persian |
تدمد: | 2676-4768 2676-4776 |
Relation: | https://sjce.journals.sharif.edu/article_1427_80d13fafeea05f81883c7e0de859a6b3.pdf; https://doaj.org/toc/2676-4768; https://doaj.org/toc/2676-4776 |
DOI: | 10.24200/j30.2019.1427 |
URL الوصول: | https://doaj.org/article/e1a883ffd37a45808e1651901bbd7639 |
رقم الانضمام: | edsdoj.1a883ffd37a45808e1651901bbd7639 |
قاعدة البيانات: | Directory of Open Access Journals |
تدمد: | 26764768 26764776 |
---|---|
DOI: | 10.24200/j30.2019.1427 |