Academic Journal

Непряме визначення температури розплаву в печах для переплавки алюмінієвого брухту ; Indirect determination of the melting temperature in aluminum scrap furnaces

التفاصيل البيبلوغرافية
العنوان: Непряме визначення температури розплаву в печах для переплавки алюмінієвого брухту ; Indirect determination of the melting temperature in aluminum scrap furnaces
المؤلفون: Панов, Є. М., Боженко, М. Ф., Коржик, М. В.
بيانات النشر: КПІ ім. Ігоря Сікорського
Київ
سنة النشر: 2023
مصطلحات موضوعية: піч, алюмінієвий брухт, розплав, температура, огородження, густина теплового потоку, коефіцієнт теплопередачі, furnace, aluminum scrap, melt, temperature, enclosure, lining, thermal insulation, heat flow density, heat transfer coefficient, 669.715:621.745.012
الوصف: Наведені результати розрахункових досліджень з визначення густини теплового потоку та температури зовнішніх поверхонь бокової та торцевої стінок печі для переплавлення алюмінієвого брухту в інтервалі температур розплаву 670 – 750 оС; на базі розрахункових даних отримана апроксимуюча залежність q = f (tст), максимальне відхилення яких не перевищує 4,6 %. Встановлена залежність температури стінки зовнішньої поверхні стінки від коефіцієнта теплопередачі, побудована залежність kр = f (tст), максимальне відхилення розрахункових даних не перевищує 5,6 %. Надані практичні рекомендації стосовно оперативного визначення температури розплаву в печі в циклі плавки алюмінієвого брухту за виміряною температурою стінки зовнішньої поверхні. ; Based on the analysis of literary sources, it is shown that the production of secondary non-ferrous metals, and aluminum in particular, is very efficient since the costs of raw materials and materials for their production are much lower than for the production of primary metals. For the production of 1 ton of secondary aluminum, of which about 100,000 tons are produced in Ukraine, about 2,000 kWh of electrical energy is consumed, which is 7-9 times less than for the production of aluminum by the electrolytic method. At the same time, emissions of hydrogen fluoride and resinous substances into the atmosphere, which occur during the production of primary aluminum, are virtually eliminated. Furnaces heated by the burning of gaseous or liquid fuel, as well as furnaces with electric heating, are used for melting aluminum scrap, curing and processing the obtained aluminum. Previous authors’ research concerned the study of temperature and thermal conditions of operation of a stationary furnace for remelting aluminum scrap with electric and gas heating. The working space of the furnace is made in the form of a lined rectangular chamber with a floor, side and end walls, and a vault. The chamber has two zones: the lower one, where the aluminum is located after melting the loaded scrap, and the upper ...
نوع الوثيقة: article in journal/newspaper
وصف الملف: Pp. 22-29; application/pdf
اللغة: Ukrainian
Relation: Вісник НТУУ «КПІ ім. Ігоря Сікорського». Серія «Хімічна інженерія, екологія та ресурсозбереження»: збірник наукових праць, № 2 (22); Панов, Є. М. Непряме визначення температури розплаву в печах для переплавки алюмінієвого брухту / Панов Є. М., Боженко М. Ф., Коржик М. В. // Вісник НТУУ «КПІ ім. Ігоря Сікорського». Серія «Хімічна інженерія, екологія та ресурсозбереження». – 2023. – № 2 (22). – С. 32-38. – Бібліогр.: 12 назв.; https://ela.kpi.ua/handle/123456789/58821; https://doi.org/10.20535/2617-9741.2.2023.283520
DOI: 10.20535/2617-9741.2.2023.283520
الاتاحة: https://ela.kpi.ua/handle/123456789/58821
https://doi.org/10.20535/2617-9741.2.2023.283520
Rights: https://creativecommons.org/licenses/by/4.0/
رقم الانضمام: edsbas.F798FE8
قاعدة البيانات: BASE
الوصف
DOI:10.20535/2617-9741.2.2023.283520