Academic Journal
Sintered Fe-Ni-Si-C alloys
| العنوان: | Sintered Fe-Ni-Si-C alloys |
|---|---|
| المؤلفون: | Kaewkam, Tiwat, Kansuwan, Panya, Ohtake, Naoto, Wila, Pongsak, Krataithong, Rungtip, Tosangthum, Nattaya, Yotkaew, Thanyaporn, Tongsri, Ruangdaj |
| المصدر: | IOP Conference Series: Materials Science and Engineering ; volume 1137, issue 1, page 012035 ; ISSN 1757-8981 1757-899X |
| بيانات النشر: | IOP Publishing |
| سنة النشر: | 2021 |
| الوصف: | The aim of this research is to explore the effect of nickel content on microstructural development and mechanical properties of sintered Fe-Ni-Si-C alloys. The sintered alloys were prepared from powder mixtures of pre-alloyed Fe-Ni-based powders (nickel contents varied as 0.45, 0.90, 1.80, and 4.00 wt.%) and fixed 4 wt.% silicon carbide powder by using a powder metallurgical process. Sintering was performed in a vacuum furnace at 1250°C for 45 minutes and slow cooling in the furnace. Microstructures of sintered alloys varied with nickel contents. Nickel showed a strong influence on promoting bainitic ferrite/martensite-austenite (BF/M-A) structure formation. Retained austenite in BF/M-A structure was found to increase with increasing nickel content. Tensile properties (strength and elongation value) of sintered alloys increased with increasing nickel content. |
| نوع الوثيقة: | article in journal/newspaper |
| اللغة: | unknown |
| DOI: | 10.1088/1757-899x/1137/1/012035 |
| DOI: | 10.1088/1757-899X/1137/1/012035 |
| DOI: | 10.1088/1757-899X/1137/1/012035/pdf |
| الاتاحة: | http://dx.doi.org/10.1088/1757-899x/1137/1/012035 https://iopscience.iop.org/article/10.1088/1757-899X/1137/1/012035 https://iopscience.iop.org/article/10.1088/1757-899X/1137/1/012035/pdf |
| Rights: | http://creativecommons.org/licenses/by/3.0/ ; https://iopscience.iop.org/info/page/text-and-data-mining |
| رقم الانضمام: | edsbas.EB303279 |
| قاعدة البيانات: | BASE |
| DOI: | 10.1088/1757-899x/1137/1/012035 |
|---|