التفاصيل البيبلوغرافية
| العنوان: |
Structural characterisation of soot particles for cold and hot-start operation of a diesel engine |
| المؤلفون: |
Arora, Priyanka, Lodi, Faisal, Verma, Puneet, Jafari, Mohammad, Zare, Ali, Stevanovic, Svetlana, Bodisco, Timothy A., Brown, Richard J., Ristovski, Zoran |
| المساهمون: |
Chanson, Hubert, Brown, Richard |
| المصدر: |
Proceedings of the 22nd Australasian Fluid Mechanics Conference (AFMC2020) |
| بيانات النشر: |
The University of Queensland |
| سنة النشر: |
2020 |
| المجموعة: |
Queensland University of Technology: QUT ePrints |
| مصطلحات موضوعية: |
Cold-start, Hot-start, Morphology, Nanostructure, TEM |
| الوصف: |
The current study investigates the morphology and nanostructure of soot particles during cold and hot-start operation of a custom designed drive cycle for a heavy-duty diesel engine. The drive cycle consists of eight repeated sets of 120 seconds each, with abrupt change in the load at 30 second intervals at a constant engine speed (1500 and 2000 rpm). After each segment there is an engine stop period of 60 seconds. Soot samples were collected on TEM grids for the first three consecutive sets (cold-start) and the last three consecutive sets (hot-start). The soot samples were analysed using transmission electron microscope. An in-house automated image processing methodology was used for the quantification of a range of characterisation parameters. The results show that the primary particle size during cold-start is smaller in comparison with hot-start operation. High fractal dimension of soot aggregate for cold-start operation would mean more compact structure of soot particles. Shorter fringes with a higher fringe separation distance for cold-start would mean lower graphitisation of soot particles. |
| نوع الوثيقة: |
book part |
| وصف الملف: |
application/pdf |
| اللغة: |
unknown |
| Relation: |
https://eprints.qut.edu.au/244032/1/AFMC2020_Revised_paper_151.pdf; Arora, Priyanka, Lodi, Faisal, Verma, Puneet, Jafari, Mohammad, Zare, Ali, Stevanovic, Svetlana, Bodisco, Timothy A., Brown, Richard J., & Ristovski, Zoran (2020) Structural characterisation of soot particles for cold and hot-start operation of a diesel engine. In Chanson, Hubert & Brown, Richard (Eds.) Proceedings of the 22nd Australasian Fluid Mechanics Conference (AFMC2020). The University of Queensland, Brisbane, Qld.; https://eprints.qut.edu.au/244032/; Science & Engineering Faculty; School of Earth & Atmospheric Sciences; School of Mechanical, Medical & Process Engineering |
| الاتاحة: |
https://eprints.qut.edu.au/244032/ |
| Rights: |
free_to_read ; http://creativecommons.org/licenses/by-nc/4.0/ ; Consult author(s) regarding copyright matters ; This work is covered by copyright. Unless the document is being made available under a Creative Commons Licence, you must assume that re-use is limited to personal use and that permission from the copyright owner must be obtained for all other uses. If the document is available under a Creative Commons License (or other specified license) then refer to the Licence for details of permitted re-use. It is a condition of access that users recognise and abide by the legal requirements associated with these rights. If you believe that this work infringes copyright please provide details by email to qut.copyright@qut.edu.au |
| رقم الانضمام: |
edsbas.E79B60B2 |
| قاعدة البيانات: |
BASE |