Dissertation/ Thesis
利用模流分析與田口法改善歐規電池固定座翹曲變形之研究 ; Improving the Deformation Warping European Regulatory Battery Holder by Using Mold Flow Analysis and Taguchi Method
| العنوان: | 利用模流分析與田口法改善歐規電池固定座翹曲變形之研究 ; Improving the Deformation Warping European Regulatory Battery Holder by Using Mold Flow Analysis and Taguchi Method |
|---|---|
| المؤلفون: | 楊春梅, Yang,Chun-Mei |
| المساهمون: | 南臺科技大學機械工程系 |
| بيانات النشر: | [臺南市永康區：南臺科技大學] |
| سنة النشر: | 2016 |
| المجموعة: | Southern Taiwan University Institutional Repository (STUTIR) |
| مصطلحات موضوعية: | 射出成型, 翹曲, 田口方法, Moldex3D, 模流分析, Injection molding, Warp, Taguchi methods, Mold flow analysis |
| Time: | 10 |
| الوصف: | 論文中文摘要： 塑膠射出成型技術的進步，影響到市場對於產品品質上的高要求，因此產品參數的控制就非常重要，很多因素都會影響到產品的品質，並產生缺陷，例如:翹曲、包封、縫合線、破裂、表面流痕和短射等問題。透過電腦輔助工程軟體(Computer Aided Engineering，簡稱CAE)模擬，即可尋找出最佳參數，在實際開模具前，改善產品所存在的缺陷問題，進而節省試模時間、修整模具次數和減少材料的浪費。 本研究是以探討歐規電池固定座之翹曲，首先透過Moldex3D模流分析來模擬，再以田口法找出影響其翹曲可控因子，並加以探討此翹曲進行成形參數的修正與改善，來提高產品品質。 論文外文摘要： The plastic injection molding technology advances, affecting the market for the high demands on product quality, and therefore, the control parameters of the product is very important, a lot of factors that will affect the quality of the product, and generate defects such as: warpage, encapsulation, suture line, surface flow marks and short shots and other issues. Analyze movement via computer-aided engineering software (Computer Aided Engineering, referred to as CAE), you can find out the optimal parameters before the actual opening mold, improve product defects exist, thus saving time tryout, trimming dies and reduce material waste. This research is to explore the battery holder of the EU warping, first through Moldex3D mold flow analysis to simulate the Taguchi method to identify controllable factors affecting its warp and warp to explore this correction and improvement of molding parameters to improve product quality. |
| نوع الوثيقة: | thesis |
| وصف الملف: | 3100045 bytes; application/pdf |
| اللغة: | Chinese English |
| Relation: | http://ir.lib.stust.edu.tw/handle/987654321/21413 |
| الاتاحة: | http://ir.lib.stust.edu.tw/handle/987654321/21413 |
| رقم الانضمام: | edsbas.D2A6EE09 |
| قاعدة البيانات: | BASE |
| الوصف غير متاح. |