Academic Journal
Towards an industrial manufactured morphing trailing edge flap system for wind turbines
| العنوان: | Towards an industrial manufactured morphing trailing edge flap system for wind turbines |
|---|---|
| المؤلفون: | Aagaard Madsen , Helge, Løgstrup Andersen, Tom, Bergami, Leonardo, Jørgensen, Johnny Egtved, Candela Garolera, Anna, Holbøll, Joachim, Schettler, T., Michels, P., Schoebel, M., Heisterberg, M., Christensen, M.B. |
| المصدر: | Aagaard Madsen , H , Løgstrup Andersen , T , Bergami , L , Jørgensen , J E , Candela Garolera , A , Holbøll , J , Schettler , T , Michels , P , Schoebel , M , Heisterberg , M & Christensen , M B 2014 , Towards an industrial manufactured morphing trailing edge flap system for wind turbines . in Proceedings of EWEA 2014 . European Wind Energy Association (EWEA) , European Wind Energy Conference & Exhibition 2014 , Barcelona , Spain , 10/03/2014 . |
| بيانات النشر: | European Wind Energy Association (EWEA) |
| سنة النشر: | 2014 |
| المجموعة: | Technical University of Denmark: DTU Orbit / Danmarks Tekniske Universitet |
| الوصف: | A flap actuation system, the Controllable Rubber Trailing Edge Flap (CRTEF), for distributed load control on a wind turbine blade has been developed in the period from 2006 to 2010 at DTU. The function of the system and its capability to change the lift on a blade section was measured during a wind tunnel experiment in 2009 with promising results. This led in 2011 to initiation of a new research project INDUFLAP with the main aim to transfer the flap technology to industry as concerns manufacturing and testing. Three industrial partners are participating in the project. Rehau (DE) and Dansk Gummi Industri (DK) work on flap manufacturing and Hydratech Industries (DK) is developing the powering system for the flaps and the control system. DTU is the coordinator of the project. Flap prototypes have been manufactured in a continuous thermoplastic extrusion process and a unique rotating test rig has been developed and build, based on a 100kW turbine platform. A 2m (span) x 1m (chord) blade section with the flap system is mounted at the end of a 10m long boom rotated up to 50-60 rpm. Measurements comprise surface pressure measurements for detailed monitoring of the flap actions. |
| نوع الوثيقة: | article in journal/newspaper |
| وصف الملف: | application/pdf |
| اللغة: | English |
| Relation: | https://orbit.dtu.dk/en/publications/a57754c9-dacb-420b-aa7e-5cb3be1d1009 |
| الاتاحة: | https://orbit.dtu.dk/en/publications/a57754c9-dacb-420b-aa7e-5cb3be1d1009 https://backend.orbit.dtu.dk/ws/files/89912814/Towards_an_industrial_manufactured.pdf |
| Rights: | info:eu-repo/semantics/openAccess |
| رقم الانضمام: | edsbas.CEC4014B |
| قاعدة البيانات: | BASE |
| الوصف غير متاح. |