Academic Journal

Catalytic Dry Reforming and Cracking of Ethylene for Carbon Nanofilaments and Hydrogen Production Using a Catalyst Derived from a Mining Residue

التفاصيل البيبلوغرافية
العنوان: Catalytic Dry Reforming and Cracking of Ethylene for Carbon Nanofilaments and Hydrogen Production Using a Catalyst Derived from a Mining Residue
المؤلفون: Abir Azara, El-Hadi Benyoussef, Faroudja Mohellebi, Mostafa Chamoumi, François Gitzhofer, Nicolas Abatzoglou
المصدر: Catalysts; Volume 9; Issue 12; Pages: 1069
بيانات النشر: Multidisciplinary Digital Publishing Institute
سنة النشر: 2019
المجموعة: MDPI Open Access Publishing
مصطلحات موضوعية: dry reforming, catalytic cracking, ethylene, carbon nanofilaments, hydrogen
الوصف: In this study, iron-rich mining residue (UGSO) was used as a support to prepare a new Ni-based catalyst via a solid-state reaction protocol. Ni-UGSO with different Ni weight percentages wt.% (5, 10, and 13) were tested for C2H4 dry reforming (DR) and catalytic cracking (CC) after activation with H2. The reactions were conducted in a differential fixed-bed reactor at 550–750 °C and standard atmospheric pressure, using 0.5 g of catalyst. Pure gases were fed at a molar ratio of C2H4/CO2 = 3 for the DR reaction and C2H4/Ar = 3 for the CC reaction. The flow rate is defined by a GHSV = 4800 mLSTP/h.gcat. The catalyst performance is evaluated by calculating the C2H4 conversion as well as carbon and H2 yields. All fresh, activated, and spent catalysts, as well as deposited carbon, were characterized by Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX), transmission electron microscopy (TEM), temperature programmed reduction (TPR), and thermogravimetric analysis (TGA). The results so far show that the highest carbon and H2 yields are obtained with Ni-UGSO 13% at 750 °C for the CC reaction and at 650 °C for the DR reaction. The deposited carbon was found to be filamentous and of various sizes (i.e., diameters and lengths). The analyses of the results show that iron is responsible for the growth of carbon nanofilaments (CNF) and nickel is responsible for the split of C–C bonds. In terms of conversion and yield efficiencies, the performance of the catalytic formulations tested is proven at least equivalent to other Ni-based catalyst performances described by the literature.
نوع الوثيقة: text
وصف الملف: application/pdf
اللغة: English
Relation: Environmental Catalysis; https://dx.doi.org/10.3390/catal9121069
DOI: 10.3390/catal9121069
الاتاحة: https://doi.org/10.3390/catal9121069
Rights: https://creativecommons.org/licenses/by/4.0/
رقم الانضمام: edsbas.ADFC7899
قاعدة البيانات: BASE