Design and Test of Wendelstein 7-X Water-Cooled Divertor Scraper
| العنوان: | Design and Test of Wendelstein 7-X Water-Cooled Divertor Scraper |
|---|---|
| المؤلفون: | Boscary, J., Greuner, Henri, Ehrke, Gunnar, Boeswirth, Bernd, Wang, Zhongwei, Clark, Emily, Lumsdaine, Arnold, Tretter, Jorg, Junghanns, Patrick, Stadler, Reinhold, McGinnis, William Dean, Lore, Jeremy D., Team, W7-X |
| سنة النشر: | 2018 |
| المجموعة: | SciTec Connect (Office of Scientific and Technical Information - OSTI, U.S. Department of Energy) |
| الوصف: | Heat load calculations have indicated the possible overloading of the ends of the water-cooled divertor facing the pumping gap beyond their technological limit. The intention of the scraper is the interception of some of the plasma fluxes both upstream and downstream before they reach the divertor surface. The scraper is divided into six modules of four plasma facing components (PFCs); each module has four PFCs hydraulically connected in series by two water boxes (inlet and outlet). A full-scale prototype of one module has been manufactured. Development activities have been carried out to connect the water boxes to the cooling pipes of the PFCs by tungsten inert gas internal orbital welding. This prototype was successfully tested in the GLADIS facility with 17 MW/m2 for 500 cycles. The results of these activities have confirmed the possible technological basis for a fabrication of the water-cooled scraper. |
| نوع الوثيقة: | other/unknown material |
| وصف الملف: | application/pdf |
| اللغة: | unknown |
| Relation: | http://www.osti.gov/servlets/purl/1437897; https://www.osti.gov/biblio/1437897; https://doi.org/10.1109/TPS.2018.2804660 |
| DOI: | 10.1109/TPS.2018.2804660 |
| الاتاحة: | http://www.osti.gov/servlets/purl/1437897 https://www.osti.gov/biblio/1437897 https://doi.org/10.1109/TPS.2018.2804660 |
| رقم الانضمام: | edsbas.A9EA2EC |
| قاعدة البيانات: | BASE |
| DOI: | 10.1109/TPS.2018.2804660 |
|---|