Academic Journal
Characterization of Machined Surface by EDM for Al/B4Cp Composite Material
| العنوان: | Characterization of Machined Surface by EDM for Al/B4Cp Composite Material |
|---|---|
| المؤلفون: | Guleryuz, L. Feray, Kasman, S., Ozan, S., Ipek, R. |
| بيانات النشر: | Polish Acad Sciences Inst Physics |
| سنة النشر: | 2013 |
| المجموعة: | Ege University Institutional Repository |
| الوصف: | WOS: 000317541600022 ; 2nd International Congress on Advances in Applied Physics and Materials Science (APMAS) -- APR 26-29, 2012 -- Antalya, TURKEY ; In this study, electrical discharge machining process was performed to investigate the machinability of Al/B4Cp metal matrix composites manufactured by powder metallurgy. For this, an experimental layout was conducted by using full factorial design. In the analysis, there are three parameters of which one is at three levels and the remaining are two levels. Totally, 48 experiments were carried out. The surface roughness (R-a) was increased with increasing the current (C), pulse-on-time (T-on), pulse-off-time (T-off) and amount of pArticle (PR). DOT: 10.12693/APhysPolA.123.224 ; Gebze Inst Technol, Izmir Katip Celebi Univ, Istanbul Kultur Univ, Doga Nanobiotech Inc, Terra Lab, Inc, LOT Oriel Grp Europe, Redoks Inc, Edinburgh Instruments, Anamed ; Analitik Grp, NanoMagnet Instruments Ltd, Maney Publishing |
| نوع الوثيقة: | article in journal/newspaper |
| اللغة: | English |
| تدمد: | 1898-794X 0587-4246 |
| Relation: | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı; Acta Physica Polonica A; https://hdl.handle.net/11454/47814; https://doi.org/10.12693/APhysPolA.123.224; 123; 224; 226 |
| DOI: | 10.12693/APhysPolA.123.224 |
| الاتاحة: | https://hdl.handle.net/11454/47814 https://doi.org/10.12693/APhysPolA.123.224 |
| Rights: | open |
| رقم الانضمام: | edsbas.9F9B8B00 |
| قاعدة البيانات: | BASE |
Full Text Finder | تدمد: | 1898794X 05874246 |
|---|---|
| DOI: | 10.12693/APhysPolA.123.224 |