التفاصيل البيبلوغرافية
العنوان: |
Composite Electrolytes Based on Poly(Ethylene Oxide) and Lithium Borohydrides for All-Solid-State Lithium–Sulfur Batteries |
المؤلفون: |
Xiang Zhang (19800), Tengfei Zhang (794004), Yifei Shao (10533762), Hailin Cao (10533765), Zhenhua Liu (335797), Shuai Wang (109515), Xiaogang Zhang (1282050) |
سنة النشر: |
2021 |
المجموعة: |
Smithsonian Institution: Digital Repository |
مصطلحات موضوعية: |
Biophysics, Biochemistry, Medicine, Hematology, Space Science, Chemical Sciences not elsewhere classified, hydride, lithium metal anode, EO, conductivity, electrolyte, SSE, cm, poly, PEO, batterie, LiBH 4, Lithium |
الوصف: |
Complex hydride LiBH 4 is a promising solid-state electrolyte (SSE) for rechargeable batteries, owing to its great compatibility with the lithium metal anode and good mechanical properties. However, LiBH 4 only exhibits high ionic conductivity (10 –3 S cm –1 ) with the hexagonal structure at temperatures above 117 °C. To overcome this obstacle, composite poly(ethylene oxide)–hydride electrolytes were synthesized by a solution-casting method. PEO–Li 4 (BH 4 ) 3 I (EO/Li + = 10) delivers the highest ionic conductivity of 4.09 × 10 –4 S cm –1 with high Li + transference number of 0.45 at 70 °C. The addition of nano-SiO 2 as an inorganic filler enhances the dendrite-free ability of electrolyte membranes dramatically and prolongs the cycle life of the Li symmetric battery from <100–360 h. In order to suppress the shuttling effect of polysulfide and volume expansion in lithium–sulfur (Li–S) batteries, sulfurized pyrolyzed poly(acrylonitrile) was selected as the cathode material for all-solid-state batteries, which presented a remarkable cycling stability of 232 (967 for sulfur content) mA h g –1 after 75 cycles. These attempts not only decrease the application temperature of LiBH 4 but also broaden the utilization of hydride in SSEs. |
نوع الوثيقة: |
article in journal/newspaper |
اللغة: |
unknown |
Relation: |
https://figshare.com/articles/journal_contribution/Composite_Electrolytes_Based_on_Poly_Ethylene_Oxide_and_Lithium_Borohydrides_for_All-Solid-State_Lithium_Sulfur_Batteries/14380554 |
DOI: |
10.1021/acssuschemeng.1c00381.s001 |
الاتاحة: |
https://doi.org/10.1021/acssuschemeng.1c00381.s001 |
Rights: |
CC BY-NC 4.0 |
رقم الانضمام: |
edsbas.926A6D8D |
قاعدة البيانات: |
BASE |