التفاصيل البيبلوغرافية
| العنوان: |
Characterization of Iron Aluminide Diffusion Coatings Obtained after Friction Surfacing |
| المؤلفون: |
Norberto Martins, Ana Paula Silva, Gilmar Cordeiro da Silva, Ítalo Bruno dos Santos, Carlos Eduardo dos Santos, Fernanda Troysi, Pedro Brito |
| المصدر: |
Metals; Volume 13; Issue 3; Pages: 461 |
| بيانات النشر: |
Multidisciplinary Digital Publishing Institute |
| سنة النشر: |
2023 |
| المجموعة: |
MDPI Open Access Publishing |
| مصطلحات موضوعية: |
iron aluminide, coating, friction surfacing, diffusion |
| الوصف: |
Iron aluminides are considered as candidate materials for high temperature applications for their excellent high temperature corrosion and oxidation resistance. In the present work, iron-aluminide coatings were developed by friction surfacing (6351 aluminum alloy deposited on a low-carbon steel substrate) followed by a diffusion heat treatment. The initial coatings were found to be geometrically homogenous and adhered well to the steel substrate. The heat treatment process was carried out at 550 °C for 48, 72 and 96 h and the resulting coatings were characterized in terms of microstructure, chemical composition, hardness distribution and phase composition. After heat treatment, the coating/substrate interface morphology was modified and presented patterns typical of Fe-Al intermetallic formation, as well as a substantial increase in hardness (>900 HV) relative to the initial as-deposited condition. With the diffusion treatment, initially Fe2Al5 was found to develop in the coatings, which was converted into FeAl2 after longer exposures. |
| نوع الوثيقة: |
text |
| وصف الملف: |
application/pdf |
| اللغة: |
English |
| Relation: |
Corrosion and Protection; https://dx.doi.org/10.3390/met13030461 |
| DOI: |
10.3390/met13030461 |
| الاتاحة: |
https://doi.org/10.3390/met13030461 |
| Rights: |
https://creativecommons.org/licenses/by/4.0/ |
| رقم الانضمام: |
edsbas.91542670 |
| قاعدة البيانات: |
BASE |