Academic Journal
Investigation of stress relief crack susceptibility of CrMoV steels coarse grain HAZ via simulation of uniaxial stress conditions during PWHT
| العنوان: | Investigation of stress relief crack susceptibility of CrMoV steels coarse grain HAZ via simulation of uniaxial stress conditions during PWHT |
|---|---|
| المؤلفون: | Czeskleba, Denis, Nietzke, Jonathan, Rhode, Michael, Kannengießer, Thomas |
| سنة النشر: | 2023 |
| المجموعة: | Publica - Publikationsserver der Bundesanstalt für Materialforschung und -prüfung (BAM) |
| مصطلحات موضوعية: | ddc:543, ddc:620 |
| الوصف: | Creep-resistant steels such as the 13CrMoV9-10, used in the construction of thick-walled pressure vessels, are most commonly submerged arc welded (SAW). These steels can develop stress relief cracks (SRC) if the mandatory post weld heat treatment (PWHT) is performed improperly. Current PWHT parameters, such as heating rate and holding time at a specific holding temperature, are based on both empirical experience and conventional free shrinking welding experiments to characterize the SRC-susceptibility of the weld. These cannot adequately depict the higher residual stresses caused by the structurally induced stiffness of the surrounding construction. This study discusses the development of a repeatable, precise, and time-efficient methodology to study the effects of different stress levels and heating rates on the SRC susceptibility of the coarse grain heat-affected zone (CGHAZ). For that purpose, samples were thermically treated to simulate a coarse grain heat-affected zone (CGHAZ) and subsequently exposed to representative levels of stress during the heating phase of a PWHT. The recorded stress and heating rate–dependent strains were mathematically analyzed via curve tracing/calculus to identify interdependent effects. This procedure facilitates the measurement of material characteristics such as carbide growth on grain boundaries at the µm-scale via an integrated value over the entire sample volume. The first and second derivatives show a slight, precipitate-dependent, increase in hardness of the sample, depending on the heating rate and applied stress. This new methodology generates an improved assessment of the SRC susceptibility of SAW microstructures of creep-resistant CrMoV steels. |
| نوع الوثيقة: | article in journal/newspaper |
| وصف الملف: | application/pdf |
| اللغة: | English |
| Relation: | https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/57600; http://nbn-resolving.org/urn:nbn:de:kobv:b43-576007; https://nbn-resolving.org/urn:nbn:de:kobv:b43-576007; https://doi.org/10.1007/s40194-023-01539-x; https://opus4.kobv.de/opus4-bam/files/57600/Czeskleba_CrMoV_SRC_PWHT_Simulated_HAZ_050623.pdf |
| DOI: | 10.1007/s40194-023-01539-x |
| الاتاحة: | https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/57600 http://nbn-resolving.org/urn:nbn:de:kobv:b43-576007 https://nbn-resolving.org/urn:nbn:de:kobv:b43-576007 https://doi.org/10.1007/s40194-023-01539-x https://opus4.kobv.de/opus4-bam/files/57600/Czeskleba_CrMoV_SRC_PWHT_Simulated_HAZ_050623.pdf |
| Rights: | https://creativecommons.org/licenses/by/4.0/deed.de ; info:eu-repo/semantics/openAccess |
| رقم الانضمام: | edsbas.7DDB39C |
| قاعدة البيانات: | BASE |
| DOI: | 10.1007/s40194-023-01539-x |
|---|