Academic Journal
Non-destructive impedance monitoring of bacterial metabolic activity towards continuous lead biorecovery
| العنوان: | Non-destructive impedance monitoring of bacterial metabolic activity towards continuous lead biorecovery |
|---|---|
| المؤلفون: | Andrews, George, Neveling, Olga, De Beer, Dirk Johannes, Chirwa, Evans M.N., Brink, Hendrik Gideon, Trudi-Heleen |
| بيانات النشر: | MDPI |
| سنة النشر: | 2022 |
| المجموعة: | University of Pretoria: UPSpace |
| مصطلحات موضوعية: | Nondestructive, Inline monitoring, Bacterial growth, Metabolic activity, Lead biorecovery, Impedance spectroscopy |
| الوصف: | DATA AVAILABILITY STATEMENT : The data used in this study are publicly available in Mendeley Data at https://DOI.org/10.17632/jfvzvwzggv.1. ; The adverse health effects of the presence of lead in wastewater streams are well documented, with conventional methods of lead recovery and removal suffering from disadvantages such as high energy costs, the production of toxic sludge, and low lead selectivity. Klebsiella pneumoniae and Paraclostridium bifermentans have been identified as potential lead-precipitating species for use in a lead recovery bioreactor. Electrical impedance spectroscopy (EIS) on a low-cost device is used to determine the potential for the probe-free and label-free monitoring of cell growth in a bioreactor containing these bacteria. A complex polynomial is fit for several reactive equivalent circuit components. A direct correlation is found between the extracted supercapacitance and the plated colony-forming unit count during the exponential growth phase, and a qualitative correlation is found between all elements of the measured reactance outside the exponential growth phase. Strong evidence is found that Pb(II) ions act as an anaerobic respiration co-substrate for both cells observed, with changes in plated count qualitatively mirrored in the Pb(II) concentration. Guidance is given on the implementation of EIS devices for continuous impedance monitoring. ; The National Research Foundation and the University of Pretoria under the Additive Manufacturing for Electronic Systems grant. ; https://www.mdpi.com/journal/sensors ; am2023 ; Chemical Engineering |
| نوع الوثيقة: | article in journal/newspaper |
| وصف الملف: | application/pdf |
| اللغة: | English |
| Relation: | 1424-8220 (online); http://hdl.handle.net/2263/92869 |
| DOI: | 10.3390/s22187045 |
| الاتاحة: | http://hdl.handle.net/2263/92869 https://doi.org/10.3390/s22187045 |
| Rights: | © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license. |
| رقم الانضمام: | edsbas.791EA726 |
| قاعدة البيانات: | BASE |
| DOI: | 10.3390/s22187045 |
|---|