Academic Journal
Industrial Fe-Ni alloys for HTS coated conductor tapes
| العنوان: | Industrial Fe-Ni alloys for HTS coated conductor tapes |
|---|---|
| المؤلفون: | Soubeyroux, Jean-Louis, Chaudouët, Patrick, Girard, Antoine, Odier, Philippe, Ortega, Luc, Waeckerle, Thierry |
| المساهمون: | Magnétisme et Supraconductivité (NEEL - MagSup), Institut Néel (NEEL), Université Joseph Fourier - Grenoble 1 (UJF)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP)-Centre National de la Recherche Scientifique (CNRS)-Université Joseph Fourier - Grenoble 1 (UJF)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP)-Centre National de la Recherche Scientifique (CNRS), Laboratoire des matériaux et du génie physique (LMGP), Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP)-Institut National Polytechnique de Grenoble (INPG)-Institut de Chimie - CNRS Chimie (INC-CNRS)-Centre National de la Recherche Scientifique (CNRS), Consortium de Recherches pour l'Emergence des Technologies Avancées (CRETA), Centre National de la Recherche Scientifique (CNRS)-Université Grenoble Alpes 2016-2019 (UGA 2016-2019 ), X'Press : diffraction et hautes pressions (NEEL - X'Press), Imphy Alloys, Imphy |
| المصدر: | ISSN: 1742-6588 ; EISSN: 1742-6596. |
| بيانات النشر: | CCSD IOP Science |
| سنة النشر: | 2008 |
| المجموعة: | Université Grenoble Alpes: HAL |
| مصطلحات موضوعية: | coated conductors, substrate, RABiTS, FeNi alloy, [CHIM.MATE]Chemical Sciences/Material chemistry |
| الوصف: | Best of the art of industrial rolling conditions have been developed to get a roughness inferior to 20 nm, improved further if necessary by electrolytic polishing (roughness of 6nm has been reached) or cold rolling. The effects of annealing conditions (temperature and atmosphere) on the cubique texture were analyzed. RX pole figures have been achieved on samples annealed up to 1100°C. Attention has been paid to the rolling texture and to the annealing processes. The rolling texture has been found to be mainly copper-type (C, S and B contributions). Beginning of recrystallization occurred around 500°C and stabilized between 1050°C to 1100°C, depending on the nickel content of the alloy, higher temperature annealing leading to overgrowth of grains. Finally, several samples, rolled and annealed under the appropriate conditions, have been characterized. Pole figure measurements gave the global inplane and out-of-plane disorientations of our samples which are in-plane 5.5° and out-plane (RD) 4.5° for best samples. EBSD maps have shown the details of the distribution and show no twined {122}<21-2> orientations. |
| نوع الوثيقة: | article in journal/newspaper |
| اللغة: | English |
| DOI: | 10.1088/1742-6596/97/1/012069 |
| الاتاحة: | https://hal.science/hal-00266150 https://hal.science/hal-00266150v1/document https://hal.science/hal-00266150v1/file/Soubeyroux_Eucas07.pdf https://doi.org/10.1088/1742-6596/97/1/012069 |
| Rights: | info:eu-repo/semantics/OpenAccess |
| رقم الانضمام: | edsbas.6AE91C42 |
| قاعدة البيانات: | BASE |
| DOI: | 10.1088/1742-6596/97/1/012069 |
|---|