التفاصيل البيبلوغرافية
| العنوان: |
Differences in the Microstructures and Tensile Properties of Each Zone of Inertia Friction Welded Joints of TA19 Titanium Alloy |
| المؤلفون: |
Zhijun Li, Zihao Li, Weijie Tang, Shengsheng Zhao, Hongying Wang |
| المصدر: |
Processes; Volume 11; Issue 1; Pages: 147 |
| بيانات النشر: |
Multidisciplinary Digital Publishing Institute |
| سنة النشر: |
2023 |
| المجموعة: |
MDPI Open Access Publishing |
| مصطلحات موضوعية: |
inertia friction welding, TA19 titanium alloy, microstructure, tensile strength, plastic property |
| جغرافية الموضوع: |
agris |
| الوصف: |
TA19 titanium alloy is a novel medium-temperature, high-strength titanium alloy widely used in the aerospace industry, and its welding performance is very important for the manufacturing of structural parts. In this study, TA19 titanium alloy was connected by inertial friction welding (IFW). After welding, the microstructural and alloying elements of the IFW joints were investigated; the results showed that the microstructures of each zone of the IFW joint were different, and accumulations of the β-stable element Mo were only observed in the base metal (BM) and the heat-affected zone (HAZ). Tensile tests were performed using specially designed specimens with circular grooves to obtain the axial mechanical properties of different zones of IFW joints. The stress–strain curves and tensile fractures of the different specimens were analyzed; the results showed that the tensile strength of the welded joint increased, but the plasticity decreased from BM to WZ. |
| نوع الوثيقة: |
text |
| وصف الملف: |
application/pdf |
| اللغة: |
English |
| Relation: |
https://dx.doi.org/10.3390/pr11010147 |
| DOI: |
10.3390/pr11010147 |
| الاتاحة: |
https://doi.org/10.3390/pr11010147 |
| Rights: |
https://creativecommons.org/licenses/by/4.0/ |
| رقم الانضمام: |
edsbas.4E8957C7 |
| قاعدة البيانات: |
BASE |