Academic Journal

Determination of Remaining Resource of Constructions of Buildings After Different Influences

التفاصيل البيبلوغرافية
العنوان: Determination of Remaining Resource of Constructions of Buildings After Different Influences
المؤلفون: Gordiuk, M. (Mykola), Semynoh, M. (Mykola), Holodnov, O. (Oleksandr), Tkachuk, I. (Igor), Ivanov, B. (Boris)
المصدر: Technology Audit and Production Reserves
بيانات النشر: PC TECHNOLOGY CENTER
سنة النشر: 2019
المجموعة: neliti (Indonesia's Think Tank Database)
مصطلحات موضوعية: structures of buildings and structures, defects and damages, inspection, structural analysis, residual life, UDC 69.059.22:699.8, конструкции зданий и сооружений, дефекты и повреждения, обследование, расчет конструкций, остаточный ресурс, УДК 69.059.22:699.8, конструкції будівель та споруд, дефекти та пошкодження, обстеження, розрахунок конструкцій, залишковий ресурс, Indonesia
الوصف: The object of research is the residual resource of the structures of buildings and structures after various influences. The residual resource is the total operating time of the object from the moment of monitoring its technical condition to the transition to the limit state.The calculation methods recommended by the current regulatory documents of Ukraine do not allow predicting the probability of failures, an increase in the number of structural defects and deformations over time and really assessing the possibility of further operation in such conditions. One of the most problematic places is determination of the technical condition of structures of buildings and structures operating under various influences (in an aggressive environment, with forced displacements of supports, possible high-temperature influences, etc.).It is shown that the residual life of the structures of buildings and structures that suffered damage during operation after various influences can be reassigned due to reinforcement. In this case, the main question remains the determination of the physical and mechanical characteristics of the materials that were used in the manufacture of structures, as well as the calculation of structures for the justified purpose of the cross sections of reinforcing elements. Characteristics of materials are determined during the observation. During the observation, various methods were used to determine the physical and mechanical characteristics of structural materials (concrete, reinforcement, steel, brickwork, etc.), which are usually non-destructive. Non-destructive methods can be applied in cases where this is possible under the conditions of operation of structures, for example, the removal of fragments of metal, reinforcement or concrete from lightly loaded elements.The possibility of reassigning the residual resource is determined by comparing the values of the bearing capacity of the structures with acting values. The bearing capacity of the structures is determined using the values of the ...
نوع الوثيقة: article in journal/newspaper
وصف الملف: application/pdf
اللغة: Indonesian
Relation: https://www.neliti.com/publications/313054/determination-of-remaining-resource-of-constructions-of-buildings-after-differen
الاتاحة: https://www.neliti.com/publications/313054/determination-of-remaining-resource-of-constructions-of-buildings-after-differen
Rights: (c) Technology Audit and Production Reserves, 2019
رقم الانضمام: edsbas.4A293F5A
قاعدة البيانات: BASE