Dissertation/ Thesis
Modelación hidrológica por eventos extremos en la parte alta de la cuenca Chancay-Lambayeque hasta la estación Puente San Carlos utilizando el modelo HEC-HMS ; Hydrological modeling for extreme events in the upper part of the Chancay-Lambayeque basin up to the Puente San Carlos station using the HEC-HMS model
العنوان: | Modelación hidrológica por eventos extremos en la parte alta de la cuenca Chancay-Lambayeque hasta la estación Puente San Carlos utilizando el modelo HEC-HMS ; Hydrological modeling for extreme events in the upper part of the Chancay-Lambayeque basin up to the Puente San Carlos station using the HEC-HMS model |
---|---|
المؤلفون: | Yupanqui Silva, Romell Alexis |
المساهمون: | Quiroz Jimenez, Karena |
المصدر: | Universidad Peruana de Ciencias Aplicadas (UPC) ; Repositorio Académico - UPC |
بيانات النشر: | Universidad Peruana de Ciencias Aplicadas (UPC) PE |
سنة النشر: | 2024 |
المجموعة: | Repositorio Académico de la Universidad Peruana de Ciencias Aplicadas (UPC) |
مصطلحات موضوعية: | HEC-HMS, Simulación Hidrológica, Evento Extremo, Caudal Máximo, Cuenca Chancay-Lambayeque, Hydrologic Simulation, Extreme Event, Maximum Flow, Chancay-Lambayeque Watershed, https://purl.org/pe-repo/ocde/ford#1.05.11, https://purl.org/pe-repo/ocde/ford#2.00.00 |
الوصف: | La presente tesis trata de estudiar la influencia de los parámetros del modelo hidrológico HEC-HMS para un evento extremo en la parte alta de la Cuenca Chancay – Lambayeque. La metodología empleada es delimitar la región usando herramientas de geoprocesamiento para de esta manera ingresar los datos importantes como las precipitaciones en las subcuencas. Los procesos de transformación lluvia y caudal, cálculo de la pérdida por infiltración, método de flujo base, método de propagación de Muskingum fueron las formulaciones que se necesitaron para determinar los caudales del modelo en una estación de control. Posteriormente, se realizó un ajuste de parámetros donde los parámetros del método de flujo base y de propagación fueron los que más influenciaron en los resultados. El caudal máximo del modelo que se obtuvo presentó un valor menor al observado representando una diferencia de 224.20 m3/s. Este análisis es importante para la contribución para obtener un conjunto de parámetros necesarios para la región y así sea de utilidad para los estudios de pronóstico de caudales. ; This thesis studies the influence of the parameters of the HEC-HMS hydrological model for an extreme event in the upper part of the Chancay-Lambayeque basin. The methodology employed is to delimit the region using geoprocessing tools in order to enter important data such as rainfall in the sub-basins. The rainfall and flow transformation processes, calculation of infiltration loss, base flow method, Muskingum propagation method were the formulations needed to determine the model flows in a control station. Subsequently, a parameter adjustment was performed where the parameters of the base flow method and propagation method had the greatest influence on the results. The maximum flow of the model obtained presented a lower value than the observed one, representing a difference of 224.20 m3/s. This analysis is important for the contribution to obtain a set of parameters needed for the region and thus be useful for flow forecasting studies. ; Trabajo ... |
نوع الوثيقة: | bachelor thesis |
وصف الملف: | application/pdf; application/msword; application/epub |
اللغة: | Spanish; Castilian |
Relation: | http://hdl.handle.net/10757/672125; 000000012196144X |
الاتاحة: | http://hdl.handle.net/10757/672125 |
Rights: | info:eu-repo/semantics/openAccess ; http://creativecommons.org/licenses/by-nc-sa/4.0/ |
رقم الانضمام: | edsbas.3B181B1F |
قاعدة البيانات: | BASE |
الوصف غير متاح. |