Academic Journal
أعرض في EDS

Electrical Discharge Machining of SiC Reinforced 6061-T6 Aluminum Alloy Surface Composite Fabricated by Friction Stir Processing

التفاصيل البيبلوغرافية
العنوان: Electrical Discharge Machining of SiC Reinforced 6061-T6 Aluminum Alloy Surface Composite Fabricated by Friction Stir Processing
المؤلفون: Kolli Murahari, Aruri Devaraju, Gadakary Saikumar, Kosaraju Satyanarayana
المصدر: E3S Web of Conferences, Vol 309, p 01044 (2021)
بيانات النشر: EDP Sciences
سنة النشر: 2021
المجموعة: Directory of Open Access Journals: DOAJ Articles
مصطلحات موضوعية: edm, current, surface roughness, metal removal rate, pulse on time and pulse off time, Environmental sciences, GE1-350
الوصف: Engineered materials with high hardness, great wear tolerance, high high-temperature power, and a low thermal expansion coefficient are aluminum-based composites. These materials are widely used in the automotive and aerospace industries. Friction stir processing (FSP) method used to prepare SiC reinforced aluminium alloy surface composite. Material removal rate (MRR) and surface roughness (SR) are measured with the impact of pulse on time, discharge current, and pulse off time (add one or two outcomes remark at SR and MRR optimal condition) is examined. For each of the three machining parameters, L9 orthogonal arrays (OA) of three levels were used in conducting the experiments. The validity of the Aluminum Surface Composite experiment programme is determined using MINITAB.
نوع الوثيقة: article in journal/newspaper
اللغة: English
French
تدمد: 2267-1242
Relation: https://www.e3s-conferences.org/articles/e3sconf/pdf/2021/85/e3sconf_icmed2021_01044.pdf; https://doaj.org/toc/2267-1242; https://doaj.org/article/9c69a686abaf40c2b7f495500fe71ecb
DOI: 10.1051/e3sconf/202130901044
الاتاحة: https://doi.org/10.1051/e3sconf/202130901044
https://doaj.org/article/9c69a686abaf40c2b7f495500fe71ecb
رقم الانضمام: edsbas.367B267B
قاعدة البيانات: BASE
الوصف
تدمد:22671242
DOI:10.1051/e3sconf/202130901044