Academic Journal

Microstructure, Tensile Properties, and Fatigue Behavior of Linear Friction-Welded Ti-6Al-2Sn-4Zr-2Mo-0.1Si

التفاصيل البيبلوغرافية
العنوان: Microstructure, Tensile Properties, and Fatigue Behavior of Linear Friction-Welded Ti-6Al-2Sn-4Zr-2Mo-0.1Si
المؤلفون: Sidharth Rajan, Priti Wanjara, Javad Gholipour, Abu Syed Kabir
المصدر: Materials; Volume 14; Issue 1; Pages: 30
بيانات النشر: Multidisciplinary Digital Publishing Institute
سنة النشر: 2020
المجموعة: MDPI Open Access Publishing
مصطلحات موضوعية: blade-integrated disk, linear friction welding, post-weld heat treatment, stress relief annealing, titanium alloy, Ti-6Al-2Sn-4Zr-2Mo-0.1Si, mechanical properties, fatigue properties
الوصف: This paper presents the microstructural characteristics and mechanical properties of linear friction-welded (LFWed) Ti-6Al-2Sn-4Zr-2Mo-0.1Si (Ti-6242) in as-welded (AWed) and stress relief-annealed (SRAed) conditions. The weld center (WC) of the AWed Ti-6242 consisted of recrystallized prior-β grains with α’ martensite that were tempered during SRA at 800 °C for 2 h and transformed into an acicular α + β microstructure. The peak hardness values, obtained in the AWed joints at the WC, sharply decreased through the thermomechanically affected zones (TMAZs) to the heat-affected zone (HAZ) of the Ti-6242 parent metal (PM). The SRA lowered the peak hardness values at the WC slightly and fully recovered the observed softening in the HAZ. The tensile mechanical properties of the welds in the AWed and SRAed conditions surpassed the minimum requirements in the AMS specifications for the Ti-6242 alloy. Fatigue tests, performed on the SRAed welds, indicated a fatigue limit of 468 MPa at 107 cycles, just slightly higher than that of the Ti-6242 PM (434 MPa). During tensile and fatigue testing, the welds failed in the PM region, which confirms the high mechanical integrity of the joints. Both the tensile and fatigue fracture surfaces exhibited characteristic features of ductile Ti-6242 PM.
نوع الوثيقة: text
وصف الملف: application/pdf
اللغة: English
Relation: Metals and Alloys; https://dx.doi.org/10.3390/ma14010030
DOI: 10.3390/ma14010030
الاتاحة: https://doi.org/10.3390/ma14010030
Rights: https://creativecommons.org/licenses/by/4.0/
رقم الانضمام: edsbas.317C6B6F
قاعدة البيانات: BASE