التفاصيل البيبلوغرافية
| العنوان: |
Tribological Characterization of the Heat-Assisted Single Point Incremental Forming Process Applied to the Ti6Al4V Alloy with the Definition of an Adhesion Parameter for the Tool Surface |
| المؤلفون: |
Jesús Andrés Naranjo, Valentín Miguel, Juana Coello, María Carmen Manjabacas, Alberto Martínez-Martínez, Enrique García-Martínez |
| المصدر: |
Materials; Volume 14; Issue 24; Pages: 7641 |
| بيانات النشر: |
Multidisciplinary Digital Publishing Institute |
| سنة النشر: |
2021 |
| المجموعة: |
MDPI Open Access Publishing |
| مصطلحات موضوعية: |
HA-SPIF, Ti6Al4V, adhesion, surface finish |
| الوصف: |
Heat-assisted single point incremental forming or HA-SPIF has a great potential for producing one-piece batches of hard-to-form materials such as Ti6Al4V alloy for medical and aeronautical applications. One of the limitations of the process is the difficulty in achieving a reasonable surface finish, which makes essential the characterization of the tribological process in the tool–sheet contact. In fact, not much work can be found at this point in literature. In this research, a novel procedure for evaluating the adhesion on the tool surface is proposed and the influence of the temperature is determined. The surface finish of parts is analyzed, and the changes promoted by HA-SPIF appearing in the morphology of the external surface layer are characterized by SEM. |
| نوع الوثيقة: |
text |
| وصف الملف: |
application/pdf |
| اللغة: |
English |
| Relation: |
https://dx.doi.org/10.3390/ma14247641 |
| DOI: |
10.3390/ma14247641 |
| الاتاحة: |
https://doi.org/10.3390/ma14247641 |
| Rights: |
https://creativecommons.org/licenses/by/4.0/ |
| رقم الانضمام: |
edsbas.2DED64D0 |
| قاعدة البيانات: |
BASE |