التفاصيل البيبلوغرافية
| العنوان: |
Effect of cutting conditions on surface roughness in finish turning Hastelloy® X superalloy |
| المؤلفون: |
Oschelski, Tiago Borba, Urasato, Wilson Trindade, Amorim, Heraldo José de, Souza, André João de |
| سنة النشر: |
2021 |
| المجموعة: |
Universidade Federal do Rio Grande do Sul (UFRGS): Lume |
| مصطلحات موضوعية: |
Superligas (Engenharia), Torneamento, Rugosidade de superfície, Hastelloy® X superalloy, Dry turning, Wet turning, Reduced quantity lubrication, Average surface roughness, Box-Behnken Design |
| الوصف: |
The study of machining nickel-based superalloys has assisted in developing new techniques associated with cutting processes and tools. Hastelloy® X offers ideal properties for engine manufacturing in the aerospace and aeronautical applications that require high surface qualities. Thus, this work investigates the effects of three input parameters (cutting speed, depth of cut, and lubricooling conditions) at three levels on the average roughness values in the finish turning using a PVD-coated carbide tool. The 0.1 mm/rev feed rate was kept fixed, and the parameters were combined, randomized, and optimized by the Box-Behnken Design of Experiment. The statistical results showed that the most significant input parameters were cutting speed and depth of cut and their respective interactions. Furthermore, the cutting conditions with lower cutting speed and depth of cut above 1.5x tool nose radius generated high roughness values due to chatter vibration. After optimization, the best average roughness value obtained was below 0.8 µm, with a 400% increase in the material removal rate. |
| نوع الوثيقة: |
article in journal/newspaper |
| وصف الملف: |
application/pdf |
| اللغة: |
English |
| تدمد: |
2214-7853 |
| Relation: |
Materials today : proceedings. Kidlington, UK. Vol. 44, Part 1 (2021), p. 532-537; http://hdl.handle.net/10183/220545; 001125124 |
| الاتاحة: |
http://hdl.handle.net/10183/220545 |
| Rights: |
Open Access |
| رقم الانضمام: |
edsbas.2D4A91F4 |
| قاعدة البيانات: |
BASE |