Long Flat Continuous Conveyors without Critical Transfer Points

التفاصيل البيبلوغرافية
العنوان:	Long Flat Continuous Conveyors without Critical Transfer Points
المؤلفون:	Penno, Eric, Weise, Sebastian, Golder, Markus
المصدر:	innoTRAC Journal; Vol. 1 (2020): innoTRAC Journal; 74-82 ; 2701-3693
بيانات النشر:	Professorship of Conveying Engineering and Materials Handling, TU Chemnitz
سنة النشر:	2020
المجموعة:	Chemnitz University of Technology: Open Access Journals
مصطلحات موضوعية:	direct drive, continuous conveyor, magnetic toothed belt, technical textile, sliding support, conveyor, toothed belt, belt, friction
الوصف:	Conventionally, a series of several individual conveyors is necessary to realise long conveyor lines. This segmentation creates critical transfer points for the transport of goods. The number of transfer points and the overall height can be minimised by direct drives based on magnetic toothed belts and carriers attached to the mat chains. For example, a modular belt conveyor with an overall height of 100 mm and a width of 1 m can reach a length of well over 10 m. The friction between the mat chain and the sliding plane can be reduced by using alternative sliding partners such as a textile or a sliding support made of wood-based materials. These measures increase process and work safety and allow the system to be designed to be energy efficient.
نوع الوثيقة:	article in journal/newspaper
وصف الملف:	application/pdf
اللغة:	English
Relation:	https://www.bibliothek.tu-chemnitz.de/ojs/index.php/innoTRAC/article/view/453/188; https://www.bibliothek.tu-chemnitz.de/ojs/index.php/innoTRAC/article/view/453
DOI:	10.14464/innotrac.v1i0.453
الاتاحة:	https://www.bibliothek.tu-chemnitz.de/ojs/index.php/innoTRAC/article/view/453 https://doi.org/10.14464/innotrac.v1i0.453
Rights:	Copyright (c) 2020 Eric Penno, Sebastian Weise, Markus Golder
رقم الانضمام:	edsbas.1CB9D1BF
قاعدة البيانات:	BASE

View record in BASE

الوصف
DOI:	10.14464/innotrac.v1i0.453