Academic Journal
Utility approach for multi target streamlining of process parameters in wire EDM
| العنوان: | Utility approach for multi target streamlining of process parameters in wire EDM |
|---|---|
| المؤلفون: | Muniappan A., Ajithkumar M., Jayakumar V., Thiagarajan C., Sreenivasulu M. |
| المصدر: | MATEC Web of Conferences, Vol 172, p 04006 (2018) |
| بيانات النشر: | EDP Sciences |
| سنة النشر: | 2018 |
| المجموعة: | Directory of Open Access Journals: DOAJ Articles |
| مصطلحات موضوعية: | WEDM, Utility approach, Taguchi method, kerf width & surface roughness, Engineering (General). Civil engineering (General), TA1-2040 |
| الوصف: | This paper depicts the improvement of multireaction enhancement system utilizing utility technique to foresee and select the ideal setting of machining parameters in wire electro-release machining (WEDM) process. Investigations were arranged utilizing Taguchi's L27 orthogonal exhibit. A wide range of Wire EDM control variables such as pulse on time duration, pulse off time duration, servo voltage along with wire feed rate were judged for investigation. Multi reaction enhancement was performed for both cutting pace (CS) and surface unpleasantness (SR) utilizing utility idea to discover the ideal procedure parameter setting. The level of essentialness of the machining parameters for their impact on the CS and SR were controlled by utilizing investigation of fluctuation (ANOVA). In present study utility approach method used to optimize the process parameter in wire EDM of magnesium Al6061/SiC/Graphite hybrid composite with zinc covered brass wire electrode. The approach depicted here is relied upon to be profoundly useful to assembling enterprises, and furthermore different territories, for example, aviation, car and apparatus making businesses. The parameters corresponding to experiment run number 7 are pulse on time 108 units (Level 1), pulse off time 60 units (Level 3), peak current 230 units (Level 3), gap set voltage 60 units (Level 3), wire feed 3 units (Level 1) and wire tension 4 units (Level 1) are the best combination to achieve better surface roughness and cutting speed. |
| نوع الوثيقة: | article in journal/newspaper |
| اللغة: | English French |
| تدمد: | 2261-236X |
| Relation: | https://doi.org/10.1051/matecconf/201817204006; https://doaj.org/toc/2261-236X; https://doaj.org/article/5029293b672a4fde9c969d6c95959080 |
| DOI: | 10.1051/matecconf/201817204006 |
| الاتاحة: | https://doi.org/10.1051/matecconf/201817204006 https://doaj.org/article/5029293b672a4fde9c969d6c95959080 |
| رقم الانضمام: | edsbas.11302238 |
| قاعدة البيانات: | BASE |
Full Text Finder | تدمد: | 2261236X |
|---|---|
| DOI: | 10.1051/matecconf/201817204006 |