The main problem of utilization of ceramic nanopowders consists in their tendency to form hard agglomerates. The inter-agglomerate space forms pores surrounded by numerous elementary particles (crystallites). Such pores cannot be easily removed from the system during pressureless sintering. So, the obvious strategy for a technologist is to eliminate such pores at the level of shaping operations. Dry pressing is a frequently applied shaping technique of ceramic materials. That is why mechanical strength of agglomerates should be as low as possible. It enables the elimination of inter-agglomerate pores to occur under moderate pressures, applied during the shaping process. This problem will be illustrated using the really nanometric (below 10 nm) zirconia-yttria solid solution powder. The methods of effecting agglomerate strength will be shown. One of the elaborated powder preparation rout results in extremely soft agglomerates.