| الوصف: |
Force-displacement measurements and macrosections are commonly used methods to validate numerical models of clinching processes. However, these ex-situ methods often lead to springback of elastic deformations and crack-closing after unloading. In contrast, the in-situ computed tomography (CT) can provide three-dimensional images of the clinching point under loading conditions. So far, the quantity of elastic springback that causes measuring deviations between in- and ex-situ measurements is not determined. In this paper, a method is described to quantitatively compare the results of in-situ CT, ex-situ CT and CT scans of cut specimens, which are prepared for macrosectioning, among each other. The method is applied to a single-lap shear test of two clinched aluminum sheets. Here, the test is conducted to specific process steps, then the specimen is CT scanned in-situ (during loading) and ex-situ (after unloading). Subsequently, the specimens are cut for macrosectioning and CT scanned. Finally, the outer contours and the interfaces of cross section images are determined by digital image analysis and the deviations over the clinching point between ex- and in-situ methods are calculated. |