Academic Journal
Aspects of the Synthesis of Poly(styrene-block-isobutylene-block-styrene) by TiCl4-Co-initiated Cationic Polymerization in Open Conditions
| العنوان: | Aspects of the Synthesis of Poly(styrene-block-isobutylene-block-styrene) by TiCl4-Co-initiated Cationic Polymerization in Open Conditions |
|---|---|
| المؤلفون: | Miraslau I. Makarevich, Pavel A. Nikishau, Ivan A. Berezianko, Tatiana V. Glushkova, Maria A. Rezvova, Evgeny A. Ovcharenko, Giyjaz E. Bekmukhamedov, Dmitry G. Yakhvarov, Sergei V. Kostjuk |
| المصدر: | Macromol, Vol 1, Iss 4, Pp 243-255 (2021) |
| بيانات النشر: | MDPI AG, 2021. |
| سنة النشر: | 2021 |
| المجموعة: | LCC:Chemical technology LCC:Biochemistry |
| مصطلحات موضوعية: | cationic polymerization, living polymerization, isobutylene, styrene, polyisobutylene, poly(styrene-block-isobutylene-block-styrene), Chemical technology, TP1-1185, Biochemistry, QD415-436 |
| الوصف: | The cationic polymerization of isobutylene and its block copolymerization with styrene using DiCumCl/TiCl4/2,6-lutidine initiating system has been studied in open conditions. It was shown that a higher concentration of proton trap is required in open conditions as compared to the glove box technique in order to have good control over molecular weight and polydispersity. Polyisobutylenes with Mn ≤ 50,000 g mol−1 and low polydispersity (Đ ≤ 1.2) were prepared at [Lu] = 12 mM. The synthesis of poly(styrene-block-isobutylene-block-styrene) triblock copolymer (SIBS) in open conditions required the addition of proton trap into two steps, half at the beginning of the reaction and the second half together with styrene. Following this protocol, a series of triblock copolymers with different length of central polyisobutylene block (from Mn = 20,000 g mol−1 to 50,000 g mol−1) and side polystyrene blocks (Mn = 4000 g mol−1–9000 g mol−1) with low polydispersity (Đ ≤ 1.25) were synthesized. High molecular SIBS (Mn > 50,000 g mol−1) with low polydispersity (Đ < 1.3) containing longer polystyrene blocks (Mn > 6000 g mol−1) demonstrated higher tensile strength (~13.5 MPa). |
| نوع الوثيقة: | article |
| وصف الملف: | electronic resource |
| اللغة: | English |
| تدمد: | 2673-6209 |
| Relation: | https://www.mdpi.com/2673-6209/1/4/17; https://doaj.org/toc/2673-6209 |
| DOI: | 10.3390/macromol1040017 |
| URL الوصول: | https://doaj.org/article/c58f3518e4ea47d0b1be781878d7a845 |
| رقم الانضمام: | edsdoj.58f3518e4ea47d0b1be781878d7a845 |
| قاعدة البيانات: | Directory of Open Access Journals |
| ResultId |
1 |
|---|---|
| Header |
edsdoj Directory of Open Access Journals edsdoj.58f3518e4ea47d0b1be781878d7a845 957 3 Academic Journal academicJournal 956.664428710938 |
| PLink |
https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&scope=site&db=edsdoj&AN=edsdoj.58f3518e4ea47d0b1be781878d7a845&custid=s6537998&authtype=sso |
| FullText |
Array
(
[Availability] => 0
)
Array ( [0] => Array ( [Url] => https://doaj.org/article/c58f3518e4ea47d0b1be781878d7a845 [Name] => EDS - DOAJ [Category] => fullText [Text] => View record in DOAJ [MouseOverText] => View record in DOAJ ) ) |
| Items |
Array
(
[Name] => Title
[Label] => Title
[Group] => Ti
[Data] => Aspects of the Synthesis of Poly(styrene-block-isobutylene-block-styrene) by TiCl4-Co-initiated Cationic Polymerization in Open Conditions
)
Array ( [Name] => Author [Label] => Authors [Group] => Au [Data] => <searchLink fieldCode="AR" term="%22Miraslau+I%2E+Makarevich%22">Miraslau I. Makarevich</searchLink><br /><searchLink fieldCode="AR" term="%22Pavel+A%2E+Nikishau%22">Pavel A. Nikishau</searchLink><br /><searchLink fieldCode="AR" term="%22Ivan+A%2E+Berezianko%22">Ivan A. Berezianko</searchLink><br /><searchLink fieldCode="AR" term="%22Tatiana+V%2E+Glushkova%22">Tatiana V. Glushkova</searchLink><br /><searchLink fieldCode="AR" term="%22Maria+A%2E+Rezvova%22">Maria A. Rezvova</searchLink><br /><searchLink fieldCode="AR" term="%22Evgeny+A%2E+Ovcharenko%22">Evgeny A. Ovcharenko</searchLink><br /><searchLink fieldCode="AR" term="%22Giyjaz+E%2E+Bekmukhamedov%22">Giyjaz E. Bekmukhamedov</searchLink><br /><searchLink fieldCode="AR" term="%22Dmitry+G%2E+Yakhvarov%22">Dmitry G. Yakhvarov</searchLink><br /><searchLink fieldCode="AR" term="%22Sergei+V%2E+Kostjuk%22">Sergei V. Kostjuk</searchLink> ) Array ( [Name] => TitleSource [Label] => Source [Group] => Src [Data] => Macromol, Vol 1, Iss 4, Pp 243-255 (2021) ) Array ( [Name] => Publisher [Label] => Publisher Information [Group] => PubInfo [Data] => MDPI AG, 2021. ) Array ( [Name] => DatePubCY [Label] => Publication Year [Group] => Date [Data] => 2021 ) Array ( [Name] => Subset [Label] => Collection [Group] => HoldingsInfo [Data] => LCC:Chemical technology<br />LCC:Biochemistry ) Array ( [Name] => Subject [Label] => Subject Terms [Group] => Su [Data] => <searchLink fieldCode="DE" term="%22cationic+polymerization%22">cationic polymerization</searchLink><br /><searchLink fieldCode="DE" term="%22living+polymerization%22">living polymerization</searchLink><br /><searchLink fieldCode="DE" term="%22isobutylene%22">isobutylene</searchLink><br /><searchLink fieldCode="DE" term="%22styrene%22">styrene</searchLink><br /><searchLink fieldCode="DE" term="%22polyisobutylene%22">polyisobutylene</searchLink><br /><searchLink fieldCode="DE" term="%22poly%28styrene-block-isobutylene-block-styrene%29%22">poly(styrene-block-isobutylene-block-styrene)</searchLink><br /><searchLink fieldCode="DE" term="%22Chemical+technology%22">Chemical technology</searchLink><br /><searchLink fieldCode="DE" term="%22TP1-1185%22">TP1-1185</searchLink><br /><searchLink fieldCode="DE" term="%22Biochemistry%22">Biochemistry</searchLink><br /><searchLink fieldCode="DE" term="%22QD415-436%22">QD415-436</searchLink> ) Array ( [Name] => Abstract [Label] => Description [Group] => Ab [Data] => The cationic polymerization of isobutylene and its block copolymerization with styrene using DiCumCl/TiCl4/2,6-lutidine initiating system has been studied in open conditions. It was shown that a higher concentration of proton trap is required in open conditions as compared to the glove box technique in order to have good control over molecular weight and polydispersity. Polyisobutylenes with Mn ≤ 50,000 g mol−1 and low polydispersity (Đ ≤ 1.2) were prepared at [Lu] = 12 mM. The synthesis of poly(styrene-block-isobutylene-block-styrene) triblock copolymer (SIBS) in open conditions required the addition of proton trap into two steps, half at the beginning of the reaction and the second half together with styrene. Following this protocol, a series of triblock copolymers with different length of central polyisobutylene block (from Mn = 20,000 g mol−1 to 50,000 g mol−1) and side polystyrene blocks (Mn = 4000 g mol−1–9000 g mol−1) with low polydispersity (Đ ≤ 1.25) were synthesized. High molecular SIBS (Mn > 50,000 g mol−1) with low polydispersity (Đ < 1.3) containing longer polystyrene blocks (Mn > 6000 g mol−1) demonstrated higher tensile strength (~13.5 MPa). ) Array ( [Name] => TypeDocument [Label] => Document Type [Group] => TypDoc [Data] => article ) Array ( [Name] => Format [Label] => File Description [Group] => SrcInfo [Data] => electronic resource ) Array ( [Name] => Language [Label] => Language [Group] => Lang [Data] => English ) Array ( [Name] => ISSN [Label] => ISSN [Group] => ISSN [Data] => 2673-6209 ) Array ( [Name] => NoteTitleSource [Label] => Relation [Group] => SrcInfo [Data] => https://www.mdpi.com/2673-6209/1/4/17; https://doaj.org/toc/2673-6209 ) Array ( [Name] => DOI [Label] => DOI [Group] => ID [Data] => 10.3390/macromol1040017 ) Array ( [Name] => URL [Label] => Access URL [Group] => URL [Data] => <link linkTarget="URL" linkTerm="https://doaj.org/article/c58f3518e4ea47d0b1be781878d7a845" linkWindow="_blank">https://doaj.org/article/c58f3518e4ea47d0b1be781878d7a845</link> ) Array ( [Name] => AN [Label] => Accession Number [Group] => ID [Data] => edsdoj.58f3518e4ea47d0b1be781878d7a845 ) |
| RecordInfo |
Array
(
[BibEntity] => Array
(
[Identifiers] => Array
(
[0] => Array
(
[Type] => doi
[Value] => 10.3390/macromol1040017
)
)
[Languages] => Array
(
[0] => Array
(
[Text] => English
)
)
[PhysicalDescription] => Array
(
[Pagination] => Array
(
[PageCount] => 13
[StartPage] => 243
)
)
[Subjects] => Array
(
[0] => Array
(
[SubjectFull] => cationic polymerization
[Type] => general
)
[1] => Array
(
[SubjectFull] => living polymerization
[Type] => general
)
[2] => Array
(
[SubjectFull] => isobutylene
[Type] => general
)
[3] => Array
(
[SubjectFull] => styrene
[Type] => general
)
[4] => Array
(
[SubjectFull] => polyisobutylene
[Type] => general
)
[5] => Array
(
[SubjectFull] => poly(styrene-block-isobutylene-block-styrene)
[Type] => general
)
[6] => Array
(
[SubjectFull] => Chemical technology
[Type] => general
)
[7] => Array
(
[SubjectFull] => TP1-1185
[Type] => general
)
[8] => Array
(
[SubjectFull] => Biochemistry
[Type] => general
)
[9] => Array
(
[SubjectFull] => QD415-436
[Type] => general
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => Aspects of the Synthesis of Poly(styrene-block-isobutylene-block-styrene) by TiCl4-Co-initiated Cationic Polymerization in Open Conditions
[Type] => main
)
)
)
[BibRelationships] => Array
(
[HasContributorRelationships] => Array
(
[0] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Miraslau I. Makarevich
)
)
)
[1] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Pavel A. Nikishau
)
)
)
[2] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Ivan A. Berezianko
)
)
)
[3] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Tatiana V. Glushkova
)
)
)
[4] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Maria A. Rezvova
)
)
)
[5] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Evgeny A. Ovcharenko
)
)
)
[6] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Giyjaz E. Bekmukhamedov
)
)
)
[7] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Dmitry G. Yakhvarov
)
)
)
[8] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Sergei V. Kostjuk
)
)
)
)
[IsPartOfRelationships] => Array
(
[0] => Array
(
[BibEntity] => Array
(
[Dates] => Array
(
[0] => Array
(
[D] => 01
[M] => 10
[Type] => published
[Y] => 2021
)
)
[Identifiers] => Array
(
[0] => Array
(
[Type] => issn-print
[Value] => 26736209
)
)
[Numbering] => Array
(
[0] => Array
(
[Type] => volume
[Value] => 1
)
[1] => Array
(
[Type] => issue
[Value] => 4
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => Macromol
[Type] => main
)
)
)
)
)
)
)
|
| IllustrationInfo |