Academic Journal
A statistical approach to predict the sterilization value for canned olives
| العنوان: | A statistical approach to predict the sterilization value for canned olives |
|---|---|
| المساهمون: | Ziraat Fakültesi, Karacabey Meslek Yüksekokulu, Tarım Ekonomisi Bölümü, Gıda Teknolojisi Bölümü, Gıda Mühendisliği Bölümü, orcid:0000-0002-5187-9380, orcid:0000-0001-7871-1628, Güldaş, Metin, Gönenç, Sertaç, Gürbüz, Ozan, U-1332-2019, 35617778500, 55909443000, 8528582100 |
| بيانات النشر: | Wiley |
| سنة النشر: | 2008 |
| المجموعة: | Açık Erişim@BUU (Bursa Uludağ Üniversitesi) |
| مصطلحات موضوعية: | Oleaceae, Parameter estimation, Regression analysis, Sterilization (cleaning), Thermal effects, Thermocouples, Canned Olives, Correlation ratio, Regression models, Thermal sterilization, Plants (botany), Engineering, Food science & technology, Determining temperature distribution, Heat-transfer coefficients, Thermal-process lethality, Food, Variability, Retort, Quality, Model, Optimization, Rotary, chemical, Sterilization, Temperature, Preserved Food |
| الوصف: | It is essential that sterilization values be calculated through measurements of temperature from the coldest point of the can during thermal sterilization. However, in practice, the taking of such measurements in an operating food plant can be quite difficult because of time restrictions, and the number of thermocouples and measurements required. For this reason, it is necessary to develop a more convenient way of estimating F values that uses experimental methods through multiple regression models. The distribution of F values and the correlation between the retort temperature and the cold spot temperature of the can were taken into consideration using statistical methods. The estimated results were calculated with very low SD. It was found that there was a close relation between temperatures of retort and cold spot with a high correlation ratio, and thus it could be concluded that it is possible to use retort temperature in the estimation of F values, statistically. The experimental and estimated mean averages of F values were calculated as 13.59 and 13.59 for a 0.5-kg can, 14.15 and 14.16 for a 1-kg can, and 8.22 and 8.22 for a 5-kg can. A high correlation was found between the experimental and estimated F values (0.91 for a 0.5-kg can, 0.86 for a 1-kg can and 0.96 for a 5-kg can; P < 0.001). It was also noted that an inversely proportional relation exists between the size of the can and the F value. |
| نوع الوثيقة: | article in journal/newspaper |
| وصف الملف: | application/pdf |
| اللغة: | English |
| Relation: | Makale - Uluslararası Hakemli Dergi; Journal of Food Process Engineering; https://hdl.handle.net/11452/40525; 000255715600002; 299; 316; 31 |
| DOI: | 10.1111/j.1745-4549.2007.00197.x |
| الاتاحة: | https://hdl.handle.net/11452/40525 https://onlinelibrary.wiley.com/doi/10.1111/j.1745-4549.2007.00197.x https://doi.org/10.1111/j.1745-4549.2007.00197.x |
| Rights: | info:eu-repo/semantics/openAccess |
| رقم الانضمام: | edsbas.D202352 |
| قاعدة البيانات: | BASE |
كن أول من يترك تعليقا!