التفاصيل البيبلوغرافية
العنوان: |
Selection of the Formation Mode of a Zinc Mesh Electrode for an Electrochromic Device with the Possibility of Energy Recovery |
المؤلفون: |
Kotok, V. (Valerii), Kovalenko, V. (Vadym) |
المصدر: |
Eastern-European Journal of Enterprise Technologies |
بيانات النشر: |
PC TECHNOLOGY CENTER |
سنة النشر: |
2020 |
المجموعة: |
neliti (Indonesia's Think Tank Database) |
مصطلحات موضوعية: |
electrochromic device, nickel hydroxide, polyvinyl butyral, zinc, zincate, zinc electrode, recuperation, chemical power source, discharge, charge, UDC 544.653.2/.3, электрохромное устройство, гидроксид никеля, поливинилбутираль, цинк, цинкат, цинковый электрод, рекуперация, химический источник тока, разряд, заряд, електрохромний пристрій, гідроксид нікелю, полівінілбутираль, цинковий електрод, рекуперація, хімічне джерело струму, розряд, Indonesia |
الوصف: |
Zinc mesh electrode was proposed for creating a prototype of an electrochromic device capable of recuperating energy spent on coloration. The search for a suitable formation regime of the mesh electrode with required capacity was realized using several approaches: use of multiwire substrates, deposition of zinc from different electrolytes, change in the composition of pasted electrodes. Deposition of zinc from a simple sulfate electrolyte yielded good deposits, however, their capacity wasn't sufficient. The use of the alkaline zincate electrolyte yielded deposits with developed surface and higher capacity, but the deposits had dark color, poor adhesion and were falling off the substrate. The pasted electrode with a paste of zinc oxide, graphite and polyvinyl butyral demonstrated the highest capacity of – 0.83 mA∙h. The proposed method for forming the zinc mesh electrode was used to develop a prototype of electrochromic devices capable of recuperating electrical energy.The assembled prototype with the described electrodes demonstrated stable characteristics at a coloration degree of 50 %. The prototype was also capable of working as an energy storage unit and was used to power an LED |
نوع الوثيقة: |
article in journal/newspaper |
وصف الملف: |
application/pdf |
اللغة: |
Indonesian |
Relation: |
https://www.neliti.com/publications/308594/selection-of-the-formation-mode-of-a-zinc-mesh-electrode-for-an-electrochromic-d |
الاتاحة: |
https://www.neliti.com/publications/308594/selection-of-the-formation-mode-of-a-zinc-mesh-electrode-for-an-electrochromic-d |
Rights: |
(c) Eastern-European Journal of Enterprise Technologies, 2020 |
رقم الانضمام: |
edsbas.A361C0C |
قاعدة البيانات: |
BASE |