Academic Journal
Effects of cobalt-intercalation and polyaniline coating on electrochemical performance of layered manganese oxides
العنوان: | Effects of cobalt-intercalation and polyaniline coating on electrochemical performance of layered manganese oxides |
---|---|
المؤلفون: | Ahn, Docheon, Yoo, Insun, Koo, Yang-Mo, Shin, Namsoo, Kim, Jaekook, Shin, Tae Joo |
بيانات النشر: | ROYAL SOC CHEMISTRY |
سنة النشر: | 2011 |
المجموعة: | ScholarWorks@UNIST (Ulsan National Institute of Science and Technology) |
الوصف: | Cobalt-intercalated layered manganese oxide (CLMO, K(0.08)Co(0.12)MnO(2)), in which 75% of the potassium ions of the pristine K-birnessite (K(0.32)MnO(2)) in the interlayer region were exchanged with cobalt ions by an ion-exchanging reaction, and the polyaniline-coated CLMO prepared by chemical oxidative polymerization of aniline in an acidic medium were studied using synchrotron powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, extended X-ray absorption fine structure (EXAFS), X-ray absorption near edge spectroscopy (XANES) and scanning electron microscopy (SEM). The electrochemical performance of CLMO and polyaniline-coated CLMO was investigated for application as cathode electrode material for lithium ion batteries. Due to the effective pillaring effect of exchanged cobalt ions in the interlayer region, CLMO showed excellent cyclability over 40 cycles, although it exhibited a low discharge capacity (143 mAh/g at 40 mA g(-1) current density). Polyaniline-coated CLMO, in addition to its excellent cyclability, presented a much higher discharge capacity (253 mAh/g) than that of CLMO at a current density of 40 mA g(-1) in the range 1.5-4.0 V. These results demonstrate that intercalated cobalt ions in the interlayer region can supply sufficient structural stability during charge-discharge cycles and, furthermore, subsequent polyaniline coating on the surface of a cathode electrode can bring out surface stabilization that prevents an unwanted reaction between the electrode and electrolytes. |
نوع الوثيقة: | article in journal/newspaper |
اللغة: | unknown |
تدمد: | 0959-9428 |
Relation: | JOURNAL OF MATERIALS CHEMISTRY, v.21, no.14, pp.5282 - 5289; https://scholarworks.unist.ac.kr/handle/201301/30885; 34175; 2-s2.0-79954596311; 000288659500015; https://pubs.rsc.org/en/content/articlelanding/2011/JM/c0jm03548c#!divAbstract |
DOI: | 10.1039/c0jm03548c |
الاتاحة: | https://scholarworks.unist.ac.kr/handle/201301/30885 https://doi.org/10.1039/c0jm03548c https://pubs.rsc.org/en/content/articlelanding/2011/JM/c0jm03548c#!divAbstract |
رقم الانضمام: | edsbas.8CADAAEA |
قاعدة البيانات: | BASE |
ResultId |
1 |
---|---|
Header |
edsbas BASE edsbas.8CADAAEA 773 3 Academic Journal academicJournal 772.654235839844 |
PLink |
https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&scope=site&db=edsbas&AN=edsbas.8CADAAEA&custid=s6537998&authtype=sso |
FullText |
Array
(
[Availability] => 0
)
Array ( [0] => Array ( [Url] => https://scholarworks.unist.ac.kr/handle/201301/30885# [Name] => EDS - BASE [Category] => fullText [Text] => View record in BASE [MouseOverText] => View record in BASE ) ) |
Items |
Array
(
[Name] => Title
[Label] => Title
[Group] => Ti
[Data] => Effects of cobalt-intercalation and polyaniline coating on electrochemical performance of layered manganese oxides
)
Array ( [Name] => Author [Label] => Authors [Group] => Au [Data] => <searchLink fieldCode="AR" term="%22Ahn%2C+Docheon%22">Ahn, Docheon</searchLink><br /><searchLink fieldCode="AR" term="%22Yoo%2C+Insun%22">Yoo, Insun</searchLink><br /><searchLink fieldCode="AR" term="%22Koo%2C+Yang-Mo%22">Koo, Yang-Mo</searchLink><br /><searchLink fieldCode="AR" term="%22Shin%2C+Namsoo%22">Shin, Namsoo</searchLink><br /><searchLink fieldCode="AR" term="%22Kim%2C+Jaekook%22">Kim, Jaekook</searchLink><br /><searchLink fieldCode="AR" term="%22Shin%2C+Tae+Joo%22">Shin, Tae Joo</searchLink> ) Array ( [Name] => Publisher [Label] => Publisher Information [Group] => PubInfo [Data] => ROYAL SOC CHEMISTRY ) Array ( [Name] => DatePubCY [Label] => Publication Year [Group] => Date [Data] => 2011 ) Array ( [Name] => Subset [Label] => Collection [Group] => HoldingsInfo [Data] => ScholarWorks@UNIST (Ulsan National Institute of Science and Technology) ) Array ( [Name] => Abstract [Label] => Description [Group] => Ab [Data] => Cobalt-intercalated layered manganese oxide (CLMO, K(0.08)Co(0.12)MnO(2)), in which 75% of the potassium ions of the pristine K-birnessite (K(0.32)MnO(2)) in the interlayer region were exchanged with cobalt ions by an ion-exchanging reaction, and the polyaniline-coated CLMO prepared by chemical oxidative polymerization of aniline in an acidic medium were studied using synchrotron powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, extended X-ray absorption fine structure (EXAFS), X-ray absorption near edge spectroscopy (XANES) and scanning electron microscopy (SEM). The electrochemical performance of CLMO and polyaniline-coated CLMO was investigated for application as cathode electrode material for lithium ion batteries. Due to the effective pillaring effect of exchanged cobalt ions in the interlayer region, CLMO showed excellent cyclability over 40 cycles, although it exhibited a low discharge capacity (143 mAh/g at 40 mA g(-1) current density). Polyaniline-coated CLMO, in addition to its excellent cyclability, presented a much higher discharge capacity (253 mAh/g) than that of CLMO at a current density of 40 mA g(-1) in the range 1.5-4.0 V. These results demonstrate that intercalated cobalt ions in the interlayer region can supply sufficient structural stability during charge-discharge cycles and, furthermore, subsequent polyaniline coating on the surface of a cathode electrode can bring out surface stabilization that prevents an unwanted reaction between the electrode and electrolytes. ) Array ( [Name] => TypeDocument [Label] => Document Type [Group] => TypDoc [Data] => article in journal/newspaper ) Array ( [Name] => Language [Label] => Language [Group] => Lang [Data] => unknown ) Array ( [Name] => ISSN [Label] => ISSN [Group] => ISSN [Data] => 0959-9428 ) Array ( [Name] => NoteTitleSource [Label] => Relation [Group] => SrcInfo [Data] => JOURNAL OF MATERIALS CHEMISTRY, v.21, no.14, pp.5282 - 5289; https://scholarworks.unist.ac.kr/handle/201301/30885; 34175; 2-s2.0-79954596311; 000288659500015; https://pubs.rsc.org/en/content/articlelanding/2011/JM/c0jm03548c#!divAbstract ) Array ( [Name] => DOI [Label] => DOI [Group] => ID [Data] => 10.1039/c0jm03548c ) Array ( [Name] => URL [Label] => Availability [Group] => URL [Data] => https://scholarworks.unist.ac.kr/handle/201301/30885<br />https://doi.org/10.1039/c0jm03548c<br />https://pubs.rsc.org/en/content/articlelanding/2011/JM/c0jm03548c#!divAbstract ) Array ( [Name] => AN [Label] => Accession Number [Group] => ID [Data] => edsbas.8CADAAEA ) |
RecordInfo |
Array
(
[BibEntity] => Array
(
[Identifiers] => Array
(
[0] => Array
(
[Type] => doi
[Value] => 10.1039/c0jm03548c
)
)
[Languages] => Array
(
[0] => Array
(
[Text] => unknown
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => Effects of cobalt-intercalation and polyaniline coating on electrochemical performance of layered manganese oxides
[Type] => main
)
)
)
[BibRelationships] => Array
(
[HasContributorRelationships] => Array
(
[0] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Ahn, Docheon
)
)
)
[1] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Yoo, Insun
)
)
)
[2] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Koo, Yang-Mo
)
)
)
[3] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Shin, Namsoo
)
)
)
[4] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Kim, Jaekook
)
)
)
[5] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Shin, Tae Joo
)
)
)
)
[IsPartOfRelationships] => Array
(
[0] => Array
(
[BibEntity] => Array
(
[Dates] => Array
(
[0] => Array
(
[D] => 01
[M] => 01
[Type] => published
[Y] => 2011
)
)
[Identifiers] => Array
(
[0] => Array
(
[Type] => issn-print
[Value] => 09599428
)
[1] => Array
(
[Type] => issn-locals
[Value] => edsbas
)
)
)
)
)
)
)
|
IllustrationInfo |