Academic Journal
Experimental research procedure of roller forming unit ; Методика экспериментальных исследований роликовой формовочной установки ; Методика експериментальних досліджень роликової формувальної установки
| العنوان: | Experimental research procedure of roller forming unit ; Методика экспериментальных исследований роликовой формовочной установки ; Методика експериментальних досліджень роликової формувальної установки |
|---|---|
| المؤلفون: | Ловейкін, Вячеслав, Почка, Костянтин, Балака, Максим, Почка, Ольга |
| المصدر: | Гірничі, будівельні, дорожні та меліоративні машини; № 102 (2023); 31-37 ; Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini; No. 102 (2023); 31-37 ; Горные, строительные, дорожные и мелиоративные машины ; № 102 (2023); 31-37 ; 2709-6149 ; 2312-6590 ; 10.32347/gbdmm.2023.102 |
| بيانات النشر: | Kyiv National University of Construction and Architecture |
| سنة النشر: | 2023 |
| المجموعة: | Scientific Periodicals of Ukraine (Ukrainian Research and Academic Network) / Наукова періодика України |
| مصطلحات موضوعية: | установка, формувальний візок, режим руху, сила, крутний момент, потужність, експериментальні дослідження, програма, методика, вимірювально-реєструвальне обладнання, формовочная тележка, режим движения, крутящий момент, мощность, экспериментальные исследования, программа, измерительно-регистрирующее оборудование, unit, forming trolley, motion mode, force, torque, power, experimental research, program, procedure, measuring and recording equipment |
| الوصف: | Experimental research is conducted followed by a comparative analysis of the results, which are obtained in the process of theoretical and experimental studies, to check the theoretical research adequacy of the roller forming unit with the crank drive. We have developed the experimental research program for the roller forming unit with the crank drive. The research stand of roller forming with the crank drive was used for experimental studies. This research stand allows you to carry out full-value experimental studies on the determination of dynamic loads unrestricted. The experimental research program provides the determination of the interaction force for the compaction roller with the construction mixture, the force in the unit connecting rod, the torque on the unit drive shaft and the power, which is necessary for the realization of the forming process. The determination of these loads will make it possible to realistically assess the condition of the forming unit and rationally carry out its design and operation. Plan, procedure and processing of experimental research data have been developed. The measuring and recording equipment were selected to determine the force loads of the research stand for conducting experimental studies, which transforms the received numerical data into Microsoft Excel for their processing. The measurement of the force in the connecting rod and the interaction vertical force of the compaction roller with the construction mixture was carried out using strain gauges. These are pasted according to the bridge scheme on the connecting rod and the metal plate, which is located in the form with the building mixture under the compaction roller. RK 435 universal clamps, which make it possible to measure the line voltage, the current strength and the power under unit different load modes, are used to measure the power required for the forming process. ; В целях проверки адекватности теоретических исследований роликовой формовочной установки с кривошипно-шатунным приводом проводятся ... |
| نوع الوثيقة: | article in journal/newspaper |
| وصف الملف: | application/pdf |
| اللغة: | English |
| Relation: | http://gbdmm.knuba.edu.ua/article/view/294743/287589; http://gbdmm.knuba.edu.ua/article/view/294743 |
| الاتاحة: | http://gbdmm.knuba.edu.ua/article/view/294743 |
| Rights: | Авторське право (c) 2023 Viacheslav Loveikin, Kostiantyn Pochka, Maksym Balaka, Olha Pochka ; https://creativecommons.org/licenses/by/4.0/ |
| رقم الانضمام: | edsbas.4ACF22E4 |
| قاعدة البيانات: | BASE |
| ResultId |
1 |
|---|---|
| Header |
edsbas BASE edsbas.4ACF22E4 961 3 Academic Journal academicJournal 960.976379394531 |
| PLink |
https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&scope=site&db=edsbas&AN=edsbas.4ACF22E4&custid=s6537998&authtype=sso |
| FullText |
Array
(
[Availability] => 0
)
Array ( [0] => Array ( [Url] => http://gbdmm.knuba.edu.ua/article/view/294743# [Name] => EDS - BASE [Category] => fullText [Text] => View record in BASE [MouseOverText] => View record in BASE ) ) |
| Items |
Array
(
[Name] => Title
[Label] => Title
[Group] => Ti
[Data] => Experimental research procedure of roller forming unit ; Методика экспериментальных исследований роликовой формовочной установки ; Методика експериментальних досліджень роликової формувальної установки
)
Array ( [Name] => Author [Label] => Authors [Group] => Au [Data] => <searchLink fieldCode="AR" term="%22Ловейкін%2C+Вячеслав%22">Ловейкін, Вячеслав</searchLink><br /><searchLink fieldCode="AR" term="%22Почка%2C+Костянтин%22">Почка, Костянтин</searchLink><br /><searchLink fieldCode="AR" term="%22Балака%2C+Максим%22">Балака, Максим</searchLink><br /><searchLink fieldCode="AR" term="%22Почка%2C+Ольга%22">Почка, Ольга</searchLink> ) Array ( [Name] => TitleSource [Label] => Source [Group] => Src [Data] => Гірничі, будівельні, дорожні та меліоративні машини; № 102 (2023); 31-37 ; Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini; No. 102 (2023); 31-37 ; Горные, строительные, дорожные и мелиоративные машины ; № 102 (2023); 31-37 ; 2709-6149 ; 2312-6590 ; 10.32347/gbdmm.2023.102 ) Array ( [Name] => Publisher [Label] => Publisher Information [Group] => PubInfo [Data] => Kyiv National University of Construction and Architecture ) Array ( [Name] => DatePubCY [Label] => Publication Year [Group] => Date [Data] => 2023 ) Array ( [Name] => Subset [Label] => Collection [Group] => HoldingsInfo [Data] => Scientific Periodicals of Ukraine (Ukrainian Research and Academic Network) / Наукова періодика України ) Array ( [Name] => Subject [Label] => Subject Terms [Group] => Su [Data] => <searchLink fieldCode="DE" term="%22установка%22">установка</searchLink><br /><searchLink fieldCode="DE" term="%22формувальний+візок%22">формувальний візок</searchLink><br /><searchLink fieldCode="DE" term="%22режим+руху%22">режим руху</searchLink><br /><searchLink fieldCode="DE" term="%22сила%22">сила</searchLink><br /><searchLink fieldCode="DE" term="%22крутний+момент%22">крутний момент</searchLink><br /><searchLink fieldCode="DE" term="%22потужність%22">потужність</searchLink><br /><searchLink fieldCode="DE" term="%22експериментальні+дослідження%22">експериментальні дослідження</searchLink><br /><searchLink fieldCode="DE" term="%22програма%22">програма</searchLink><br /><searchLink fieldCode="DE" term="%22методика%22">методика</searchLink><br /><searchLink fieldCode="DE" term="%22вимірювально-реєструвальне+обладнання%22">вимірювально-реєструвальне обладнання</searchLink><br /><searchLink fieldCode="DE" term="%22формовочная+тележка%22">формовочная тележка</searchLink><br /><searchLink fieldCode="DE" term="%22режим+движения%22">режим движения</searchLink><br /><searchLink fieldCode="DE" term="%22крутящий+момент%22">крутящий момент</searchLink><br /><searchLink fieldCode="DE" term="%22мощность%22">мощность</searchLink><br /><searchLink fieldCode="DE" term="%22экспериментальные+исследования%22">экспериментальные исследования</searchLink><br /><searchLink fieldCode="DE" term="%22программа%22">программа</searchLink><br /><searchLink fieldCode="DE" term="%22измерительно-регистрирующее+оборудование%22">измерительно-регистрирующее оборудование</searchLink><br /><searchLink fieldCode="DE" term="%22unit%22">unit</searchLink><br /><searchLink fieldCode="DE" term="%22forming+trolley%22">forming trolley</searchLink><br /><searchLink fieldCode="DE" term="%22motion+mode%22">motion mode</searchLink><br /><searchLink fieldCode="DE" term="%22force%22">force</searchLink><br /><searchLink fieldCode="DE" term="%22torque%22">torque</searchLink><br /><searchLink fieldCode="DE" term="%22power%22">power</searchLink><br /><searchLink fieldCode="DE" term="%22experimental+research%22">experimental research</searchLink><br /><searchLink fieldCode="DE" term="%22program%22">program</searchLink><br /><searchLink fieldCode="DE" term="%22procedure%22">procedure</searchLink><br /><searchLink fieldCode="DE" term="%22measuring+and+recording+equipment%22">measuring and recording equipment</searchLink> ) Array ( [Name] => Abstract [Label] => Description [Group] => Ab [Data] => Experimental research is conducted followed by a comparative analysis of the results, which are obtained in the process of theoretical and experimental studies, to check the theoretical research adequacy of the roller forming unit with the crank drive. We have developed the experimental research program for the roller forming unit with the crank drive. The research stand of roller forming with the crank drive was used for experimental studies. This research stand allows you to carry out full-value experimental studies on the determination of dynamic loads unrestricted. The experimental research program provides the determination of the interaction force for the compaction roller with the construction mixture, the force in the unit connecting rod, the torque on the unit drive shaft and the power, which is necessary for the realization of the forming process. The determination of these loads will make it possible to realistically assess the condition of the forming unit and rationally carry out its design and operation. Plan, procedure and processing of experimental research data have been developed. The measuring and recording equipment were selected to determine the force loads of the research stand for conducting experimental studies, which transforms the received numerical data into Microsoft Excel for their processing. The measurement of the force in the connecting rod and the interaction vertical force of the compaction roller with the construction mixture was carried out using strain gauges. These are pasted according to the bridge scheme on the connecting rod and the metal plate, which is located in the form with the building mixture under the compaction roller. RK 435 universal clamps, which make it possible to measure the line voltage, the current strength and the power under unit different load modes, are used to measure the power required for the forming process. ; В целях проверки адекватности теоретических исследований роликовой формовочной установки с кривошипно-шатунным приводом проводятся ... ) Array ( [Name] => TypeDocument [Label] => Document Type [Group] => TypDoc [Data] => article in journal/newspaper ) Array ( [Name] => Format [Label] => File Description [Group] => SrcInfo [Data] => application/pdf ) Array ( [Name] => Language [Label] => Language [Group] => Lang [Data] => English ) Array ( [Name] => NoteTitleSource [Label] => Relation [Group] => SrcInfo [Data] => http://gbdmm.knuba.edu.ua/article/view/294743/287589; http://gbdmm.knuba.edu.ua/article/view/294743 ) Array ( [Name] => URL [Label] => Availability [Group] => URL [Data] => http://gbdmm.knuba.edu.ua/article/view/294743 ) Array ( [Name] => Copyright [Label] => Rights [Group] => Cpyrght [Data] => Авторське право (c) 2023 Viacheslav Loveikin, Kostiantyn Pochka, Maksym Balaka, Olha Pochka ; https://creativecommons.org/licenses/by/4.0/ ) Array ( [Name] => AN [Label] => Accession Number [Group] => ID [Data] => edsbas.4ACF22E4 ) |
| RecordInfo |
Array
(
[BibEntity] => Array
(
[Languages] => Array
(
[0] => Array
(
[Text] => English
)
)
[Subjects] => Array
(
[0] => Array
(
[SubjectFull] => установка
[Type] => general
)
[1] => Array
(
[SubjectFull] => формувальний візок
[Type] => general
)
[2] => Array
(
[SubjectFull] => режим руху
[Type] => general
)
[3] => Array
(
[SubjectFull] => сила
[Type] => general
)
[4] => Array
(
[SubjectFull] => крутний момент
[Type] => general
)
[5] => Array
(
[SubjectFull] => потужність
[Type] => general
)
[6] => Array
(
[SubjectFull] => експериментальні дослідження
[Type] => general
)
[7] => Array
(
[SubjectFull] => програма
[Type] => general
)
[8] => Array
(
[SubjectFull] => методика
[Type] => general
)
[9] => Array
(
[SubjectFull] => вимірювально-реєструвальне обладнання
[Type] => general
)
[10] => Array
(
[SubjectFull] => формовочная тележка
[Type] => general
)
[11] => Array
(
[SubjectFull] => режим движения
[Type] => general
)
[12] => Array
(
[SubjectFull] => крутящий момент
[Type] => general
)
[13] => Array
(
[SubjectFull] => мощность
[Type] => general
)
[14] => Array
(
[SubjectFull] => экспериментальные исследования
[Type] => general
)
[15] => Array
(
[SubjectFull] => программа
[Type] => general
)
[16] => Array
(
[SubjectFull] => измерительно-регистрирующее оборудование
[Type] => general
)
[17] => Array
(
[SubjectFull] => unit
[Type] => general
)
[18] => Array
(
[SubjectFull] => forming trolley
[Type] => general
)
[19] => Array
(
[SubjectFull] => motion mode
[Type] => general
)
[20] => Array
(
[SubjectFull] => force
[Type] => general
)
[21] => Array
(
[SubjectFull] => torque
[Type] => general
)
[22] => Array
(
[SubjectFull] => power
[Type] => general
)
[23] => Array
(
[SubjectFull] => experimental research
[Type] => general
)
[24] => Array
(
[SubjectFull] => program
[Type] => general
)
[25] => Array
(
[SubjectFull] => procedure
[Type] => general
)
[26] => Array
(
[SubjectFull] => measuring and recording equipment
[Type] => general
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => Experimental research procedure of roller forming unit ; Методика экспериментальных исследований роликовой формовочной установки ; Методика експериментальних досліджень роликової формувальної установки
[Type] => main
)
)
)
[BibRelationships] => Array
(
[HasContributorRelationships] => Array
(
[0] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Ловейкін, Вячеслав
)
)
)
[1] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Почка, Костянтин
)
)
)
[2] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Балака, Максим
)
)
)
[3] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Почка, Ольга
)
)
)
)
[IsPartOfRelationships] => Array
(
[0] => Array
(
[BibEntity] => Array
(
[Dates] => Array
(
[0] => Array
(
[D] => 01
[M] => 01
[Type] => published
[Y] => 2023
)
)
[Identifiers] => Array
(
[0] => Array
(
[Type] => issn-locals
[Value] => edsbas
)
[1] => Array
(
[Type] => issn-locals
[Value] => edsbas.oa
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => Гірничі, будівельні, дорожні та меліоративні машини; № 102 (2023); 31-37 ; Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini; No. 102 (2023); 31-37 ; Горные, строительные, дорожные и мелиоративные машины ; № 102 (2023); 31-37 ; 2709-6149 ; 2312-6590 ; 10.32347/gbdmm.2023.102
[Type] => main
)
)
)
)
)
)
)
|
| IllustrationInfo |