Composite Spreader for Cooling Computer Chip With Non-Uniform Heat Dissipation
| العنوان: | Composite Spreader for Cooling Computer Chip With Non-Uniform Heat Dissipation |
|---|---|
| المؤلفون: | Hamed H. Saber, Mohamed S. El-Genk |
| المصدر: | IEEE Transactions on Components and Packaging Technologies. 31:165-172 |
| بيانات النشر: | Institute of Electrical and Electronics Engineers (IEEE), 2008. |
| سنة النشر: | 2008 |
| مصطلحات موضوعية: | Materials science, Incendie, Thermal resistance, Liquid dielectric, Thermodynamics, Fire, Electronic, Optical and Magnetic Materials, Subcooling, Thermal conductivity, Heat flux, Boiling, Heat transfer, composite spreader, copper (CU), dielectric liquid, high-power chip, non-uniform heat flux, nucleate boiling, porous graphite (PG), power dissipation, thermal resistance, Electrical and Electronic Engineering, Composite material, Nucleate boiling |
| الوصف: | The performance of a composite spreader, with a 0.4 mm thick top layer of porous graphite (PG), for enhanced cooling with nucleate boiling of FC-72 dielectric liquid, and a 1.6 mm copper (Cu) substrate, for achieving better cooling of underlying 10 X 10 mm computer chip, with a non-uniform surface heat flux, is investigated. This spreader takes an advantage of the enhanced nucleate boiling heat transfer of FC-72 dielectric liquid on PG and the good heat spreading by Cu. The dissipated thermal power by the chip has a cosine-like distribution with a peak-to-average heat flux, Phimax, which varied up to 2.467. The spreader surface area, the total thermal power dissipated by the chip, removed from the surface of the spreader, and the total thermal resistance are calculated and compared with those of PG and Cu spreaders of same thickness, 2.0 mm. With Phimax = 2.467, 39.48 W and 72.0 W can be removed from the surface of composite spreaders cooled with saturation and 30 K subcooled boiling, compared to 43.0 and 65.3 W for Cu spreaders. The calculated surface areas and total thermal resistances of the composite spreaders, 6.82 cm2 and 4.90 cm2 and 0.284 and 0.68degC/W, are smaller than for Cu spreaders, 12.26 cm2 and 11.92 cm2, and 0.51 and 0.83degC/W. In addition, the calculated chip maximum surface temperatures of 62.37degC and 72.2degC, are lower than with Cu spreaders (72.67degC and 76.30degC). |
| تدمد: | 1557-9972 1521-3331 |
| DOI: | 10.1109/tcapt.2008.916847 |
| URL الوصول: | https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e767d9e1398d1b2eb012da872e97d256 https://doi.org/10.1109/tcapt.2008.916847 |
| Rights: | CLOSED |
| رقم الانضمام: | edsair.doi.dedup.....e767d9e1398d1b2eb012da872e97d256 |
| قاعدة البيانات: | OpenAIRE |
| ResultId |
1 |
|---|---|
| Header |
edsair OpenAIRE edsair.doi.dedup.....e767d9e1398d1b2eb012da872e97d256 791 3 unknown 790.69091796875 |
| PLink |
https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&scope=site&db=edsair&AN=edsair.doi.dedup.....e767d9e1398d1b2eb012da872e97d256&custid=s6537998&authtype=sso |
| FullText |
Array
(
[Availability] => 0
)
Array ( [0] => Array ( [Url] => https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e767d9e1398d1b2eb012da872e97d256# [Name] => EDS - OpenAIRE [Category] => fullText [Text] => View record in OpenAIRE [MouseOverText] => View record in OpenAIRE ) ) |
| Items |
Array
(
[Name] => Title
[Label] => Title
[Group] => Ti
[Data] => Composite Spreader for Cooling Computer Chip With Non-Uniform Heat Dissipation
)
Array ( [Name] => Author [Label] => Authors [Group] => Au [Data] => <searchLink fieldCode="AR" term="%22Hamed+H%2E+Saber%22">Hamed H. Saber</searchLink><br /><searchLink fieldCode="AR" term="%22Mohamed+S%2E+El-Genk%22">Mohamed S. El-Genk</searchLink> ) Array ( [Name] => TitleSource [Label] => Source [Group] => Src [Data] => <i>IEEE Transactions on Components and Packaging Technologies</i>. 31:165-172 ) Array ( [Name] => Publisher [Label] => Publisher Information [Group] => PubInfo [Data] => Institute of Electrical and Electronics Engineers (IEEE), 2008. ) Array ( [Name] => DatePubCY [Label] => Publication Year [Group] => Date [Data] => 2008 ) Array ( [Name] => Subject [Label] => Subject Terms [Group] => Su [Data] => <searchLink fieldCode="DE" term="%22Materials+science%22">Materials science</searchLink><br /><searchLink fieldCode="DE" term="%22Incendie%22">Incendie</searchLink><br /><searchLink fieldCode="DE" term="%22Thermal+resistance%22">Thermal resistance</searchLink><br /><searchLink fieldCode="DE" term="%22Liquid+dielectric%22">Liquid dielectric</searchLink><br /><searchLink fieldCode="DE" term="%22Thermodynamics%22">Thermodynamics</searchLink><br /><searchLink fieldCode="DE" term="%22Fire%22">Fire</searchLink><br /><searchLink fieldCode="DE" term="%22Electronic%2C+Optical+and+Magnetic+Materials%22">Electronic, Optical and Magnetic Materials</searchLink><br /><searchLink fieldCode="DE" term="%22Subcooling%22">Subcooling</searchLink><br /><searchLink fieldCode="DE" term="%22Thermal+conductivity%22">Thermal conductivity</searchLink><br /><searchLink fieldCode="DE" term="%22Heat+flux%22">Heat flux</searchLink><br /><searchLink fieldCode="DE" term="%22Boiling%22">Boiling</searchLink><br /><searchLink fieldCode="DE" term="%22Heat+transfer%22">Heat transfer</searchLink><br /><searchLink fieldCode="DE" term="%22composite+spreader%2C+copper+%28CU%29%2C+dielectric+liquid%2C+high-power+chip%2C+non-uniform+heat+flux%2C+nucleate+boiling%2C+porous+graphite+%28PG%29%2C+power+dissipation%2C+thermal+resistance%22">composite spreader, copper (CU), dielectric liquid, high-power chip, non-uniform heat flux, nucleate boiling, porous graphite (PG), power dissipation, thermal resistance</searchLink><br /><searchLink fieldCode="DE" term="%22Electrical+and+Electronic+Engineering%22">Electrical and Electronic Engineering</searchLink><br /><searchLink fieldCode="DE" term="%22Composite+material%22">Composite material</searchLink><br /><searchLink fieldCode="DE" term="%22Nucleate+boiling%22">Nucleate boiling</searchLink> ) Array ( [Name] => Abstract [Label] => Description [Group] => Ab [Data] => The performance of a composite spreader, with a 0.4 mm thick top layer of porous graphite (PG), for enhanced cooling with nucleate boiling of FC-72 dielectric liquid, and a 1.6 mm copper (Cu) substrate, for achieving better cooling of underlying 10 X 10 mm computer chip, with a non-uniform surface heat flux, is investigated. This spreader takes an advantage of the enhanced nucleate boiling heat transfer of FC-72 dielectric liquid on PG and the good heat spreading by Cu. The dissipated thermal power by the chip has a cosine-like distribution with a peak-to-average heat flux, Phimax, which varied up to 2.467. The spreader surface area, the total thermal power dissipated by the chip, removed from the surface of the spreader, and the total thermal resistance are calculated and compared with those of PG and Cu spreaders of same thickness, 2.0 mm. With Phimax = 2.467, 39.48 W and 72.0 W can be removed from the surface of composite spreaders cooled with saturation and 30 K subcooled boiling, compared to 43.0 and 65.3 W for Cu spreaders. The calculated surface areas and total thermal resistances of the composite spreaders, 6.82 cm2 and 4.90 cm2 and 0.284 and 0.68degC/W, are smaller than for Cu spreaders, 12.26 cm2 and 11.92 cm2, and 0.51 and 0.83degC/W. In addition, the calculated chip maximum surface temperatures of 62.37degC and 72.2degC, are lower than with Cu spreaders (72.67degC and 76.30degC). ) Array ( [Name] => ISSN [Label] => ISSN [Group] => ISSN [Data] => 1557-9972<br />1521-3331 ) Array ( [Name] => DOI [Label] => DOI [Group] => ID [Data] => 10.1109/tcapt.2008.916847 ) Array ( [Name] => URL [Label] => Access URL [Group] => URL [Data] => <link linkTarget="URL" linkTerm="https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e767d9e1398d1b2eb012da872e97d256" linkWindow="_blank">https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e767d9e1398d1b2eb012da872e97d256</link><br /><link linkTarget="URL" linkTerm="https://doi.org/10.1109/tcapt.2008.916847" linkWindow="_blank">https://doi.org/10.1109/tcapt.2008.916847</link> ) Array ( [Name] => Copyright [Label] => Rights [Group] => Cpyrght [Data] => CLOSED ) Array ( [Name] => AN [Label] => Accession Number [Group] => ID [Data] => edsair.doi.dedup.....e767d9e1398d1b2eb012da872e97d256 ) |
| RecordInfo |
Array
(
[BibEntity] => Array
(
[Identifiers] => Array
(
[0] => Array
(
[Type] => doi
[Value] => 10.1109/tcapt.2008.916847
)
)
[Languages] => Array
(
[0] => Array
(
[Text] => Undetermined
)
)
[PhysicalDescription] => Array
(
[Pagination] => Array
(
[PageCount] => 8
[StartPage] => 165
)
)
[Subjects] => Array
(
[0] => Array
(
[SubjectFull] => Materials science
[Type] => general
)
[1] => Array
(
[SubjectFull] => Incendie
[Type] => general
)
[2] => Array
(
[SubjectFull] => Thermal resistance
[Type] => general
)
[3] => Array
(
[SubjectFull] => Liquid dielectric
[Type] => general
)
[4] => Array
(
[SubjectFull] => Thermodynamics
[Type] => general
)
[5] => Array
(
[SubjectFull] => Fire
[Type] => general
)
[6] => Array
(
[SubjectFull] => Electronic, Optical and Magnetic Materials
[Type] => general
)
[7] => Array
(
[SubjectFull] => Subcooling
[Type] => general
)
[8] => Array
(
[SubjectFull] => Thermal conductivity
[Type] => general
)
[9] => Array
(
[SubjectFull] => Heat flux
[Type] => general
)
[10] => Array
(
[SubjectFull] => Boiling
[Type] => general
)
[11] => Array
(
[SubjectFull] => Heat transfer
[Type] => general
)
[12] => Array
(
[SubjectFull] => composite spreader, copper (CU), dielectric liquid, high-power chip, non-uniform heat flux, nucleate boiling, porous graphite (PG), power dissipation, thermal resistance
[Type] => general
)
[13] => Array
(
[SubjectFull] => Electrical and Electronic Engineering
[Type] => general
)
[14] => Array
(
[SubjectFull] => Composite material
[Type] => general
)
[15] => Array
(
[SubjectFull] => Nucleate boiling
[Type] => general
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => Composite Spreader for Cooling Computer Chip With Non-Uniform Heat Dissipation
[Type] => main
)
)
)
[BibRelationships] => Array
(
[HasContributorRelationships] => Array
(
[0] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Hamed H. Saber
)
)
)
[1] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Mohamed S. El-Genk
)
)
)
)
[IsPartOfRelationships] => Array
(
[0] => Array
(
[BibEntity] => Array
(
[Dates] => Array
(
[0] => Array
(
[D] => 01
[M] => 03
[Type] => published
[Y] => 2008
)
)
[Identifiers] => Array
(
[0] => Array
(
[Type] => issn-print
[Value] => 15579972
)
[1] => Array
(
[Type] => issn-print
[Value] => 15213331
)
[2] => Array
(
[Type] => issn-locals
[Value] => edsair
)
)
[Numbering] => Array
(
[0] => Array
(
[Type] => volume
[Value] => 31
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => IEEE Transactions on Components and Packaging Technologies
[Type] => main
)
)
)
)
)
)
)
|
| IllustrationInfo |