Critical wall thickness in electrical discharge machining
| العنوان: | Critical wall thickness in electrical discharge machining |
|---|---|
| المؤلفون: | Y. M. Woo, Swee Hock Yeo, P. C. Tan |
| المصدر: | The International Journal of Advanced Manufacturing Technology. 64:821-828 |
| بيانات النشر: | Springer Science and Business Media LLC, 2012. |
| سنة النشر: | 2012 |
| مصطلحات موضوعية: | Engineering, Fabrication, business.industry, Mechanical Engineering, Structural engineering, Mechanics, Critical value, Industrial and Manufacturing Engineering, Computer Science Applications, Taguchi methods, Electrical discharge machining, Machining, Control and Systems Engineering, Thermal, Erosion, Wall thickness, business, Software |
| الوصف: | Electrical discharge machining (EDM) is capable of fabricating thin wall structures due to the absence of physical contact between the tool and workpiece. However, the presence of impulsive force does exist during the sparking process, which could give rise to limitations in fabricating small features. The L9 Taguchi method together with the analysis of variance was used to determine the significance of various machining parameters on the specific impulsive force. Through the statistical analysis, it was observed that discharge energy was the most significant factor that influenced the specific impulsive force. Hence, it is important to understand the effects of specific impulsive force in EDM and to investigate its influence that limits the fabrication of thin wall structures. The limit in which the machined part is able to maintain its geometrical integrity is described as the critical wall thickness. The effects of specific impulsive force on thin wall structure were studied through determining the critical wall thickness for various discharge energies. The experimental work showed that both electrothermal erosion and brink erosion, which is attributed by the specific impulsive force was responsible for the loss of geometrical integrity of the wall structure. As the wall thickness falls below a critical value in a given discharge energy setting, the brink erosion was observed. The limit that established the critical wall thickness was elucidated by conflating the thermal erosion and brink erosion. |
| تدمد: | 1433-3015 0268-3768 |
| DOI: | 10.1007/s00170-012-4076-5 |
| URL الوصول: | https://explore.openaire.eu/search/publication?articleId=doi_________::3a27c2db0f517a58ab807e8f184ed56c https://doi.org/10.1007/s00170-012-4076-5 |
| Rights: | CLOSED |
| رقم الانضمام: | edsair.doi...........3a27c2db0f517a58ab807e8f184ed56c |
| قاعدة البيانات: | OpenAIRE |
| ResultId |
1 |
|---|---|
| Header |
edsair OpenAIRE edsair.doi...........3a27c2db0f517a58ab807e8f184ed56c 796 3 unknown 796.025451660156 |
| PLink |
https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&scope=site&db=edsair&AN=edsair.doi...........3a27c2db0f517a58ab807e8f184ed56c&custid=s6537998&authtype=sso |
| FullText |
Array
(
[Availability] => 0
)
Array ( [0] => Array ( [Url] => https://explore.openaire.eu/search/publication?articleId=doi_________::3a27c2db0f517a58ab807e8f184ed56c# [Name] => EDS - OpenAIRE [Category] => fullText [Text] => View record in OpenAIRE [MouseOverText] => View record in OpenAIRE ) ) |
| Items |
Array
(
[Name] => Title
[Label] => Title
[Group] => Ti
[Data] => Critical wall thickness in electrical discharge machining
)
Array ( [Name] => Author [Label] => Authors [Group] => Au [Data] => <searchLink fieldCode="AR" term="%22Y%2E+M%2E+Woo%22">Y. M. Woo</searchLink><br /><searchLink fieldCode="AR" term="%22Swee+Hock+Yeo%22">Swee Hock Yeo</searchLink><br /><searchLink fieldCode="AR" term="%22P%2E+C%2E+Tan%22">P. C. Tan</searchLink> ) Array ( [Name] => TitleSource [Label] => Source [Group] => Src [Data] => <i>The International Journal of Advanced Manufacturing Technology</i>. 64:821-828 ) Array ( [Name] => Publisher [Label] => Publisher Information [Group] => PubInfo [Data] => Springer Science and Business Media LLC, 2012. ) Array ( [Name] => DatePubCY [Label] => Publication Year [Group] => Date [Data] => 2012 ) Array ( [Name] => Subject [Label] => Subject Terms [Group] => Su [Data] => <searchLink fieldCode="DE" term="%22Engineering%22">Engineering</searchLink><br /><searchLink fieldCode="DE" term="%22Fabrication%22">Fabrication</searchLink><br /><searchLink fieldCode="DE" term="%22business%2Eindustry%22">business.industry</searchLink><br /><searchLink fieldCode="DE" term="%22Mechanical+Engineering%22">Mechanical Engineering</searchLink><br /><searchLink fieldCode="DE" term="%22Structural+engineering%22">Structural engineering</searchLink><br /><searchLink fieldCode="DE" term="%22Mechanics%22">Mechanics</searchLink><br /><searchLink fieldCode="DE" term="%22Critical+value%22">Critical value</searchLink><br /><searchLink fieldCode="DE" term="%22Industrial+and+Manufacturing+Engineering%22">Industrial and Manufacturing Engineering</searchLink><br /><searchLink fieldCode="DE" term="%22Computer+Science+Applications%22">Computer Science Applications</searchLink><br /><searchLink fieldCode="DE" term="%22Taguchi+methods%22">Taguchi methods</searchLink><br /><searchLink fieldCode="DE" term="%22Electrical+discharge+machining%22">Electrical discharge machining</searchLink><br /><searchLink fieldCode="DE" term="%22Machining%22">Machining</searchLink><br /><searchLink fieldCode="DE" term="%22Control+and+Systems+Engineering%22">Control and Systems Engineering</searchLink><br /><searchLink fieldCode="DE" term="%22Thermal%22">Thermal</searchLink><br /><searchLink fieldCode="DE" term="%22Erosion%22">Erosion</searchLink><br /><searchLink fieldCode="DE" term="%22Wall+thickness%22">Wall thickness</searchLink><br /><searchLink fieldCode="DE" term="%22business%22">business</searchLink><br /><searchLink fieldCode="DE" term="%22Software%22">Software</searchLink> ) Array ( [Name] => Abstract [Label] => Description [Group] => Ab [Data] => Electrical discharge machining (EDM) is capable of fabricating thin wall structures due to the absence of physical contact between the tool and workpiece. However, the presence of impulsive force does exist during the sparking process, which could give rise to limitations in fabricating small features. The L9 Taguchi method together with the analysis of variance was used to determine the significance of various machining parameters on the specific impulsive force. Through the statistical analysis, it was observed that discharge energy was the most significant factor that influenced the specific impulsive force. Hence, it is important to understand the effects of specific impulsive force in EDM and to investigate its influence that limits the fabrication of thin wall structures. The limit in which the machined part is able to maintain its geometrical integrity is described as the critical wall thickness. The effects of specific impulsive force on thin wall structure were studied through determining the critical wall thickness for various discharge energies. The experimental work showed that both electrothermal erosion and brink erosion, which is attributed by the specific impulsive force was responsible for the loss of geometrical integrity of the wall structure. As the wall thickness falls below a critical value in a given discharge energy setting, the brink erosion was observed. The limit that established the critical wall thickness was elucidated by conflating the thermal erosion and brink erosion. ) Array ( [Name] => ISSN [Label] => ISSN [Group] => ISSN [Data] => 1433-3015<br />0268-3768 ) Array ( [Name] => DOI [Label] => DOI [Group] => ID [Data] => 10.1007/s00170-012-4076-5 ) Array ( [Name] => URL [Label] => Access URL [Group] => URL [Data] => <link linkTarget="URL" linkTerm="https://explore.openaire.eu/search/publication?articleId=doi_________::3a27c2db0f517a58ab807e8f184ed56c" linkWindow="_blank">https://explore.openaire.eu/search/publication?articleId=doi_________::3a27c2db0f517a58ab807e8f184ed56c</link><br /><link linkTarget="URL" linkTerm="https://doi.org/10.1007/s00170-012-4076-5" linkWindow="_blank">https://doi.org/10.1007/s00170-012-4076-5</link> ) Array ( [Name] => Copyright [Label] => Rights [Group] => Cpyrght [Data] => CLOSED ) Array ( [Name] => AN [Label] => Accession Number [Group] => ID [Data] => edsair.doi...........3a27c2db0f517a58ab807e8f184ed56c ) |
| RecordInfo |
Array
(
[BibEntity] => Array
(
[Identifiers] => Array
(
[0] => Array
(
[Type] => doi
[Value] => 10.1007/s00170-012-4076-5
)
)
[Languages] => Array
(
[0] => Array
(
[Text] => Undetermined
)
)
[PhysicalDescription] => Array
(
[Pagination] => Array
(
[PageCount] => 8
[StartPage] => 821
)
)
[Subjects] => Array
(
[0] => Array
(
[SubjectFull] => Engineering
[Type] => general
)
[1] => Array
(
[SubjectFull] => Fabrication
[Type] => general
)
[2] => Array
(
[SubjectFull] => business.industry
[Type] => general
)
[3] => Array
(
[SubjectFull] => Mechanical Engineering
[Type] => general
)
[4] => Array
(
[SubjectFull] => Structural engineering
[Type] => general
)
[5] => Array
(
[SubjectFull] => Mechanics
[Type] => general
)
[6] => Array
(
[SubjectFull] => Critical value
[Type] => general
)
[7] => Array
(
[SubjectFull] => Industrial and Manufacturing Engineering
[Type] => general
)
[8] => Array
(
[SubjectFull] => Computer Science Applications
[Type] => general
)
[9] => Array
(
[SubjectFull] => Taguchi methods
[Type] => general
)
[10] => Array
(
[SubjectFull] => Electrical discharge machining
[Type] => general
)
[11] => Array
(
[SubjectFull] => Machining
[Type] => general
)
[12] => Array
(
[SubjectFull] => Control and Systems Engineering
[Type] => general
)
[13] => Array
(
[SubjectFull] => Thermal
[Type] => general
)
[14] => Array
(
[SubjectFull] => Erosion
[Type] => general
)
[15] => Array
(
[SubjectFull] => Wall thickness
[Type] => general
)
[16] => Array
(
[SubjectFull] => business
[Type] => general
)
[17] => Array
(
[SubjectFull] => Software
[Type] => general
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => Critical wall thickness in electrical discharge machining
[Type] => main
)
)
)
[BibRelationships] => Array
(
[HasContributorRelationships] => Array
(
[0] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Y. M. Woo
)
)
)
[1] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Swee Hock Yeo
)
)
)
[2] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => P. C. Tan
)
)
)
)
[IsPartOfRelationships] => Array
(
[0] => Array
(
[BibEntity] => Array
(
[Dates] => Array
(
[0] => Array
(
[D] => 11
[M] => 04
[Type] => published
[Y] => 2012
)
)
[Identifiers] => Array
(
[0] => Array
(
[Type] => issn-print
[Value] => 14333015
)
[1] => Array
(
[Type] => issn-print
[Value] => 02683768
)
[2] => Array
(
[Type] => issn-locals
[Value] => edsair
)
)
[Numbering] => Array
(
[0] => Array
(
[Type] => volume
[Value] => 64
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => The International Journal of Advanced Manufacturing Technology
[Type] => main
)
)
)
)
)
)
)
|
| IllustrationInfo |