Academic Journal
Recycling waste polyurethane from the refrigeration industry as filler in SBR/NR composites for industrial applications.
| العنوان: | Recycling waste polyurethane from the refrigeration industry as filler in SBR/NR composites for industrial applications. |
|---|---|
| المؤلفون: | Hiranobe, Carlos Toshiyuki, Tolosa, Gabrieli Roefero, de Almeida Santos, Gleyson Tadeu, de Oliveira, João Pedro Jenson, Budemberg, Eduardo Roque, da Silva, Michael Jones, Cabrera, Flávio Camargo, Job, Aldo Eloizo, Paim, Leonardo Lataro, Torres, Giovanni Barrera, dos Santos, Renivaldo José |
| المصدر: | Journal of Applied Polymer Science; Apr2023, Vol. 140 Issue 14, p1-15, 15p |
| مصطلحات موضوعية: | POLYURETHANES, RUBBER, POLYBUTADIENE, SHOE soles, STRESS-strain curves, INDUSTRIAL applications, WASTE recycling |
| مستخلص: | The refrigeration industry produces millions of tons of waste polyurethane (PU) every year, which can cause environmental damage and human health problems. This article analyzes the use of waste PU as filler in composites made of styrene butadiene rubber (SBR) and natural rubber (NR) to produce shoe soles. The interfacial interaction of said filler was evaluated by the Flory–Rehner method (swelling) using the equation developed by Lorenz–Park. The results of this evaluation were later compared with those obtained by the Mooney–Rivlin method using the data from stress–strain tests. According to the results of the tensile strength tests, the composites filled with waste PU present stress–strain curves that are like those of metallic materials that have low elastic strength but high plastic strength. Using the Lorenz–Park equation, the filled composites examined in this study exhibited values above 0.7, which means a strong filler–rubber interaction. Scanning Electron Microscopy and Fourier‐Transform Infrared Spectroscopy were used to investigate the morphology of the composites in detail. [ABSTRACT FROM AUTHOR] |
| Copyright of Journal of Applied Polymer Science is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| قاعدة البيانات: | Complementary Index |
| ResultId |
1 |
|---|---|
| Header |
edb Complementary Index 162166225 973 6 Academic Journal academicJournal 973.291381835938 |
| PLink |
https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&scope=site&db=edb&AN=162166225&custid=s6537998&authtype=sso |
| FullText |
Array
(
[Availability] => 0
)
|
| Items |
Array
(
[Name] => Title
[Label] => Title
[Group] => Ti
[Data] => Recycling waste polyurethane from the refrigeration industry as filler in SBR/NR composites for industrial applications.
)
Array ( [Name] => Author [Label] => Authors [Group] => Au [Data] => <searchLink fieldCode="AR" term="%22Hiranobe%2C+Carlos+Toshiyuki%22">Hiranobe, Carlos Toshiyuki</searchLink><br /><searchLink fieldCode="AR" term="%22Tolosa%2C+Gabrieli+Roefero%22">Tolosa, Gabrieli Roefero</searchLink><br /><searchLink fieldCode="AR" term="%22de+Almeida+Santos%2C+Gleyson+Tadeu%22">de Almeida Santos, Gleyson Tadeu</searchLink><br /><searchLink fieldCode="AR" term="%22de+Oliveira%2C+João+Pedro+Jenson%22">de Oliveira, João Pedro Jenson</searchLink><br /><searchLink fieldCode="AR" term="%22Budemberg%2C+Eduardo+Roque%22">Budemberg, Eduardo Roque</searchLink><br /><searchLink fieldCode="AR" term="%22da+Silva%2C+Michael+Jones%22">da Silva, Michael Jones</searchLink><br /><searchLink fieldCode="AR" term="%22Cabrera%2C+Flávio+Camargo%22">Cabrera, Flávio Camargo</searchLink><br /><searchLink fieldCode="AR" term="%22Job%2C+Aldo+Eloizo%22">Job, Aldo Eloizo</searchLink><br /><searchLink fieldCode="AR" term="%22Paim%2C+Leonardo+Lataro%22">Paim, Leonardo Lataro</searchLink><br /><searchLink fieldCode="AR" term="%22Torres%2C+Giovanni+Barrera%22">Torres, Giovanni Barrera</searchLink><br /><searchLink fieldCode="AR" term="%22dos+Santos%2C+Renivaldo+José%22">dos Santos, Renivaldo José</searchLink> ) Array ( [Name] => TitleSource [Label] => Source [Group] => Src [Data] => Journal of Applied Polymer Science; Apr2023, Vol. 140 Issue 14, p1-15, 15p ) Array ( [Name] => Subject [Label] => Subject Terms [Group] => Su [Data] => <searchLink fieldCode="DE" term="%22POLYURETHANES%22">POLYURETHANES</searchLink><br /><searchLink fieldCode="DE" term="%22RUBBER%22">RUBBER</searchLink><br /><searchLink fieldCode="DE" term="%22POLYBUTADIENE%22">POLYBUTADIENE</searchLink><br /><searchLink fieldCode="DE" term="%22SHOE+soles%22">SHOE soles</searchLink><br /><searchLink fieldCode="DE" term="%22STRESS-strain+curves%22">STRESS-strain curves</searchLink><br /><searchLink fieldCode="DE" term="%22INDUSTRIAL+applications%22">INDUSTRIAL applications</searchLink><br /><searchLink fieldCode="DE" term="%22WASTE+recycling%22">WASTE recycling</searchLink> ) Array ( [Name] => Abstract [Label] => Abstract [Group] => Ab [Data] => The refrigeration industry produces millions of tons of waste polyurethane (PU) every year, which can cause environmental damage and human health problems. This article analyzes the use of waste PU as filler in composites made of styrene butadiene rubber (SBR) and natural rubber (NR) to produce shoe soles. The interfacial interaction of said filler was evaluated by the Flory–Rehner method (swelling) using the equation developed by Lorenz–Park. The results of this evaluation were later compared with those obtained by the Mooney–Rivlin method using the data from stress–strain tests. According to the results of the tensile strength tests, the composites filled with waste PU present stress–strain curves that are like those of metallic materials that have low elastic strength but high plastic strength. Using the Lorenz–Park equation, the filled composites examined in this study exhibited values above 0.7, which means a strong filler–rubber interaction. Scanning Electron Microscopy and Fourier‐Transform Infrared Spectroscopy were used to investigate the morphology of the composites in detail. [ABSTRACT FROM AUTHOR] ) Array ( [Name] => Abstract [Label] => [Group] => Ab [Data] => <i>Copyright of Journal of Applied Polymer Science is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.) ) |
| RecordInfo |
Array
(
[BibEntity] => Array
(
[Identifiers] => Array
(
[0] => Array
(
[Type] => doi
[Value] => 10.1002/app.53709
)
)
[Languages] => Array
(
[0] => Array
(
[Code] => eng
[Text] => English
)
)
[PhysicalDescription] => Array
(
[Pagination] => Array
(
[PageCount] => 15
[StartPage] => 1
)
)
[Subjects] => Array
(
[0] => Array
(
[SubjectFull] => POLYURETHANES
[Type] => general
)
[1] => Array
(
[SubjectFull] => RUBBER
[Type] => general
)
[2] => Array
(
[SubjectFull] => POLYBUTADIENE
[Type] => general
)
[3] => Array
(
[SubjectFull] => SHOE soles
[Type] => general
)
[4] => Array
(
[SubjectFull] => STRESS-strain curves
[Type] => general
)
[5] => Array
(
[SubjectFull] => INDUSTRIAL applications
[Type] => general
)
[6] => Array
(
[SubjectFull] => WASTE recycling
[Type] => general
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => Recycling waste polyurethane from the refrigeration industry as filler in SBR/NR composites for industrial applications.
[Type] => main
)
)
)
[BibRelationships] => Array
(
[HasContributorRelationships] => Array
(
[0] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Hiranobe, Carlos Toshiyuki
)
)
)
[1] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Tolosa, Gabrieli Roefero
)
)
)
[2] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => de Almeida Santos, Gleyson Tadeu
)
)
)
[3] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => de Oliveira, João Pedro Jenson
)
)
)
[4] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Budemberg, Eduardo Roque
)
)
)
[5] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => da Silva, Michael Jones
)
)
)
[6] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Cabrera, Flávio Camargo
)
)
)
[7] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Job, Aldo Eloizo
)
)
)
[8] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Paim, Leonardo Lataro
)
)
)
[9] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Torres, Giovanni Barrera
)
)
)
[10] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => dos Santos, Renivaldo José
)
)
)
)
[IsPartOfRelationships] => Array
(
[0] => Array
(
[BibEntity] => Array
(
[Dates] => Array
(
[0] => Array
(
[D] => 10
[M] => 04
[Text] => Apr2023
[Type] => published
[Y] => 2023
)
)
[Identifiers] => Array
(
[0] => Array
(
[Type] => issn-print
[Value] => 00218995
)
)
[Numbering] => Array
(
[0] => Array
(
[Type] => volume
[Value] => 140
)
[1] => Array
(
[Type] => issue
[Value] => 14
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => Journal of Applied Polymer Science
[Type] => main
)
)
)
)
)
)
)
|
| IllustrationInfo |