المؤلفون: Naofumi TSUJI, Akira SAKURADA, Kota TAKASHIMA, Keisuke HARA, Hirofumi KAWAMURA, Kazuto MIYAWAKI, Hiromi ISOBE

المصدر: Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol 18, Iss 4, Pp JAMDSM0041-JAMDSM0041 (2024)

مصطلحات موضوعية: through-hole drilling, position deviation, circularity, hole dimensions, small-diameter drill, engagement behavior, suitable ultrasonic vibration-assisted drilling, ultrasonic vibration-assisted drilling, Engineering machinery, tools, and implements, TA213-215, Mechanical engineering and machinery, TJ1-1570

وصف الملف: electronic resource

Relation: https://www.jstage.jst.go.jp/article/jamdsm/18/4/18_2024jamdsm0041/_pdf/-char/en; https://doaj.org/toc/1881-3054

URL الوصول: https://doaj.org/article/e2036299ff3f48d09727879e94efc6c7

المؤلفون: DONG Huimin, WANG He, MENG Fanxing, GENG Daxi, LI Yueteng, QIAN Huanghai, SU Zhengtao

المصدر: Journal of Aeronautical Materials, Vol 43, Iss 3, Pp 94-104 (2023)

مصطلحات موضوعية: t800, composite material, ultrasonic vibration assisted drilling, dagger drill, machining accuracy, Motor vehicles. Aeronautics. Astronautics, TL1-4050

وصف الملف: electronic resource

Relation: https://doaj.org/toc/1005-5053

URL الوصول: https://doaj.org/article/91ebb9315d124cae846e4d728a85a3e6

المؤلفون: Shuang Deng, Yu Guo, Songsong Lu

المصدر: Micromachines; Volume 14; Issue 8; Pages: 1579

مصطلحات موضوعية: ultrasonic vibration-assisted drilling, micro-hole machining, motion trajectory, efficient machining

وصف الملف: application/pdf

Relation: https://dx.doi.org/10.3390/mi14081579

الاتاحة: https://doi.org/10.3390/mi14081579

المؤلفون: Xingzhi Xiao

المصدر: Journal of Composites Science; Volume 7; Issue 1; Pages: 4

مصطلحات موضوعية: ultrasonic-vibration-assisted drilling, glass-fiber-reinforced plastics, thrust force, vibration amplitude, thrust force reduction ratio

وصف الملف: application/pdf

Relation: Composites Manufacturing and Processing; https://dx.doi.org/10.3390/jcs7010004

الاتاحة: https://doi.org/10.3390/jcs7010004

المؤلفون: Akira SAKURADA, Hiromi ISOBE, Kazuto MIYAWAKI, Naofumi TSUJI

المصدر: Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21. 2021, :126-077

المؤلفون: Hiromi Isobe, Masaki Ishige, Naofumi Tsuji, Tomoyoshi Maruyama, 丸山 智義, 石毛 雅樹, 磯部 浩已, 辻 尚史

المصدر: Proceedings of JSPE Semestrial Meeting. 2021, :305

المؤلفون: Keisuke HARA, Kyosuke TAGUCHI, Masahiro MIZUNO, Nobuhito YOSHIHARA, 原 圭祐, 吉原 信人, 水野 雅裕, 田口 恭輔

المصدر: 砥粒加工学会誌 / Journal of the Japan Society for Abrasive Technology. 2019, 63(12):624

المؤلفون: 陳宇杰, Chen, Yu-Chieh

المساهمون: 廖運炫, 臺灣大學：機械工程學研究所

مصطلحات موضوعية: Inconel 718, 鑽削加工, 奈米切削液, 超音波振動輔助鑽削, drilling, nano cutting fluid, ultrasonic vibration assisted drilling

وصف الملف: 3715190 bytes; application/pdf

Relation: 1.G. MacDonald, Superalloys source book-A collection of outstanding articles from the technical literature, Pub. by ASM, 1984, 3-19 2.C.T. Sims, N.S. Stoloff and W.C. Hagel, Superalloys Ⅱ, General Electric Company, 1987 3.J.K. Tien and T. Caulfield, Superalloys, supercomposites and superceramics, Academic Press, Inc., 1989 4.Huntington Alloy Products Division, Inconel alloy 718, The International Nickel Company, Inc., Huntington, West Virginia 25720, 1978 5.H.E. Boyer and T.L. Gall, Metals handbook, Pub. by ASM, Desk Edition, Section 16, 1985 6.Huntington Alloy Products Division, Machining huntington alloys, The International Nickel Company, Inc., Huntington, West Virginia 25720, 1978 7.N. Zlatin and J. Chrisstopher, “Machining characteristics of difficult to machine materials,” Influence of Metallurgy on Machinability, Edited by Tipnis, V.A., Pub. by ASM, 1975, 296-307 8.J.M. Oblak, D.F. Paulonis and D.S. Duvall, “Coherency strengthening in Ni base alloys hardened by DO22 precipitates,” Metallurgical Transactions, Vol. 5, 1974, 143-149 9.F.W. Gosler, “Machinability data applied to aircraft engine manufacture,” Machinability Testing and Utilization of Machining Data Ⅳ, ASM, 1979, 221-238 10.R. Komanduri and T.A. Schroeder, “On shear instability in machining a nickel -iron base superalloy,” Journal of Engineering for Industry, Vol. 108, 1986, 93-100 11.馬承九，機械加工（切削加工篇），東華書局，第三章，民國87年初版 12.E.C. Orth and S. Ebenhoch, “Machining workhardening metals,” The Carbide and Tool Journal, Vol. 15, No. 3, 1983, 3-7 13.E.O. Ezugwu and C.J. Lai, “Failure modes and wear mechanisms of M35 high speed steel drills when machining Inconel 901,” Journal of Materials Processing Technology, Vol. 49, 1995, 295-312 14.林憲茂，INCONEL 718超合金車削特性之探討，國立台灣大學機械工程研究所碩士論文，民國76年 15.I.A. Choudhury and M.A. EI-Baradie, “Machining nickel base superalloys: Inconel 718,” Proc. Instn. Engrs., Vol. 212 Part B, 1998, 195-206 16.Y.S. Liao and R.H. Shiue, “Carbide tool wear mechanism in turning of Inconel 718 superalloy,” Wear, Vol.193, No. 1, 1996, 16-24 17.M. Rahman, W.K.H. Seah and T.T. Teo, “The machinability of Inconel 718,” Journal of Materials Processing Technology, Vol. 63, 1997, 199-204 18.T. Kitagawa, A. Kubo and K. Maekawa, “Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti-6Al-6V-2Sn,” Wear, Vol. 202, 1997, 142-148 19.E.O. Ezugwu and Z.M. Wang, “Wear of coated carbide tools when machining nickel (Inconel 718) and titanium base (Ti-6Al-4V) alloys,” Tribology Tansactions, Vol. 43, 2000, 263-268 20.P.C. Jindal, A.T. Santhanam, U. Schleinkofer and A.F. Shuster, “Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in tuning,” International Journal of Refractory Metals & Hard Materials, Vol. 17, 1999, 163-170 21.M. Berger and S. Hogmark, “Tribological properties of selected PVD coatings when slid ductile materials,” Wear, Vol. 252, 2002, 557-565 22.L.N. Lopez de lacalle, J. Perez, J.I. Llorente and J.A. Sanchez, “Advanced cutting conditions for the milling of aeronautical alloys,” Journal of Materials Processing Technology, Vol. 100, 2000, 1-11 23.M. Alauddin, M.A. EI-Baradie and M.S.J. Hashmi, “Optimization of surface finish in end milling Inconel 718,” Journal of Materials Processing Technology, Vol. 56, 1996, 54-65 24.陳志名，面銑削Inconel 718刀具破壞之研究，國立台灣大學機械工程研究所碩士論文，民國83年 25.王志豪，高速端銑削Inconel 718之現象分析，國立台灣大學機械工程研究所碩士論文，民國86年 26.L.N. Lopez de Lacalle, J. Perez-Bilbatua, J.A. Sanchez, J.I. Llorente, A. Gutierrez and J. Alboniga, “Using high pressure coolant in the drilling and turning of low machinability alloys,” International Journal of Advanced Manufacturing Technology, Vol. 16, 2000, 85-91 27.林維新，INCONEL 718超合金鑽削性之探討，國立台灣大學機械工程研究所碩士論文，民國74年 28.B. Mubaraki, S. Bandyopadhyay, R. Fowle and P. Mathew, “Drilling studies of an Al2O3-Al metal matrix composite part Ⅰ drill wear characteristics,” Journal of Materials Science, Vol. 30, 1995, 6273-6280 29.M.Z. Zhang, Y.B. Liu and H. Zhou, “Wear mechanism maps of uncoated HSS tools drilling die-cast aluminum alloy,” Tribology International, Vol. 34, 2001, 727-731 30.S.G. Harris, E.D. Doyle, A.C. Vlasveld, J. Audy and D. Quick, “A study of the wear mechanisms of Ti1-xAlxN and Ti1-x-yAlxCryN coated high-speed steel twist drills under dry machining conditions,” Wear, Vol. 254, 2003, 723-734 31.J. Paulo Davim and A. Monteiro Baptista, “Relationship between cutting force and PCD cutting tool wear in machining silicon carbide reinforced aluminum,” Journal of Materials Processing Technology, Vol. 103, 2000, 417-423 32.K. Subramanian and N.H. Cook, “Sensing of drill wear and prediction of drill life,” Transactions of the ASME-Journal of Engineering for Industry, May 1977, 295-301 33.E. Morin, J. Masounave and E.E. Laufer, “Effect of drill wear on cutting forces in the drilling of metal-matrix composities,” Wear, Vol. 184, 1995, 11-16 34.M. Elhachimi, S. Torbaty and P. Joyot, “Mechanical modeling of high speed drilling 1: predicting torque and thrust,” Int. J. Mach. Tools Manufact., Vol. 39, 1999, 553-568 35.M. Elhachimi, S. Torbaty and P. Joyot, “Mechanical modeling of high speed drilling 2: predicted and experimental results,” Int. J. Mach. Tools Manufact., Vol. 39, 1999, 569-581 36.C. Rubenstein, “The torque and thrust force in twist drilling-I. theory,” Int. J. Mach. Tools Manufact., Vol. 31, no. 4, 1991, 481-490 37.C. Rubenstein, “The torque and thrust force in twist drilling-II,” Int. J. Mach. Tools Manufact., Vol. 31, no. 4, 1991, 491-504 38.V. Chandrasekharan, S.G. KApoor and R.E. DeVor, “A mechanistic approach to predicting the cutting forces in drilling: with application to fiber-reinforced composite materials,” Journal of Engineering for Industry, Vol. 117, 1995, 559-570 39.E.J.A. Armarego and A. Rotenberg, “An investigation of drill point sharpening by the straight lip conical grinding method-Ⅰ. Basic analysis,” Int. J. Mach. Tool des. Res., Vol. 13, 1973, 155-164 40.E.J.A. Armarego and A. Rotenberg, “An investigation of drill point sharpening by the straight lip conical grinding method-Ⅱ. A criterion for selecting a solution,” Int. J. Mach. Tool des. Res., Vol. 13, 1973, 165-182 41.E.J.A. Armarego and H. Zhao, “Predictive force models for point thinned and circular centre edge twist drill designs,” Annals of the CIRP, 45/1, 1996, 65-70 42.S.V. Muthukrishna Selvam and C. Sujatha, “Twist drill deformation and optimum drill geometry,” Computers & Structures, Vol. 57, no. 5, 1995, 903-914 43.R.E. Howe, Producibility/machinability of Spaceage and conventional materials, Pub. by ASTME Dearbon, Michigan, Chap. 1,2,5,7, 1968 44.F.W. Wilson and R.W. Cox, Machining the spaceage metals, Pub. By ASTME. Dearbon, Michigan, Chap. 5, 1965 45.C. Rubenstein, W.S. Lau and M. Wang, “The torque and thrust arising from contact at the chisel edge and margins in spade drilling of ductile materials,” Int. J. Mach. Tools Manufact., Vol. 29, no. 3, 1989, 441-452 46.呂彥明、樊銳、陳五一、陳鼎昌，鑽尖數控刃磨中的尾隙角研究，北京航空航天大學學報第25卷第四期，1999年8月，462-466 47.W.C. Chen and K.H. Fuh, “The cutting performance of a TiN-coated drill with curved primary cutting edges,” Journal of Materials Processing Technology, Vol. 49, 1995, 183-198 48.W.C. Chen and X.D. Liu, “Study on the various coated twist drills for stainless steels drilling,” Journal of Materials Processing Technology, Vol. 99, 2000, 226-230 49.H.K. Tonshoff and A. Mohlfeld, “PVD-coating for wear protection in dry cutting operations,” Surface & Coatings Technology, Vol. 93, 1997, 88-92 50.H. Takeyama and S. Kato, “Burrless drilling by means of ultrasonic vibration,” Annals of the CIRP, 40/1, 1991, 83-86 51.D.Y. Zhang, X.J. Feng, L.J. Wnag and D.C. Chen, “Study on the drill skidding motion in ultrasonic vibration microdrilling,” Int. J. Mach. Tools Manufact., Vol. 34, no. 6, 1994, 847-857 52.D.Y. Zhang and L.J. Wang, “Investigation of chip in vibration drilling,” Int. J. Mach. Tools Manufact., Vol. 38, no. 3, 1998, 165-176 53.H.G. Towes, W.D. Compton and S. Chandrasekar, “A study of the influence of superimposed low-frequency modulation on the drilling process,” Precision Engineering, Vol. 22, 1998, 1-9 54.李漢州，利用振動以達高速切削運用在小徑孔鑽削之研究，國立雲林科技大學機械工程研究所碩士論文，民國88年 55.L.B. Zhang, L.J. Wang and X. Wang, “Study on vibration drilling of fiber reinforced plastics with hybrid variation parameters method,” Composites: Part A, Vol. 34, 2003, 237-244 56.X. Wang, L.J. Wang and J.P. Tao, “Investigation on thrust in vibration drilling of fiber-reinforced plastics,” Journal of Materials Processing Technology, Vol. 148, 2004, 239-244 57.R. Cozar and A. Pineau, “Morphology of and precipitates and thermal stability of Inconel 718 type alloys,” Metallurgical Transactions, Vol. 104, 1973, 47-59 58.井川博、伍代友和 著，王建義 譯，鎳基耐熱超合金之銲接，機械月刊11卷1期，民國74年1月 59.C.R. Brooks, Heat treatment, structure and properties of nonferrous alloys, Pub. by ASM, 1982 60.I. Kirman and D.H. Warrington, “The precipitation of Ni3Nb phases in a Ni-Fe-Cr-Nb alloys,” Metallurgical Transactions, Vol. l, no. 10, 1970, 2667 61.G.E. Dieter, Mechanical metallurgy, McGraw-Hill Book Company, 1988 62.M.C. Shaw, A.L. Thunrman and H.J. Ahlgren, “A plasticity problem involving plane strain and plane stress simultaneously: Groove formation in the machining of high-temperature alloys,” Transactions of the ASME, 1966, 142-146 63.B.H. Kear, J.M. Oblak and A.F. Giami, “Precipitation hardened nickel-base alloys,” Metallurgical Transactions, Vol. 1, 1970, 2477-2486 64.M.C. Shaw, Metal Cutting Principles, Oxford Univ. Press New York (1984) 65.洪良德，切削刀具學，全華科技圖書公司，第三章，民國92年3版 66.傅光華，切削工具學，高立圖書公司，第六章，民國75年3版 67.S. Kalpakjian, Manufacturing engineering and technology, Addison-Wesley Publishing Company, Chap. 22, 1992 68.S. Ramalingam and P.K. Wright, “Abrasive wear in machining: Experiment with material of controlled microstructure,” Journal of Engineering Materials and Technology, Vol. 103, 1981, 151-156 69.范光照、黃漢邦、陳炳煇、張所鈜、顏家鈺編著，奈米工程概論，普林斯頓國際有限公司，民國92年 70.張立德，納米材料，北京：化學工業出版社，2000年 71.莊允中，奈米技術之應用與市場分析，金屬工業研究發展中心出版，民國92年初版 72.馬振基，奈米材料科技原理與應用，全華科技圖書股份有限公司出版，民國92年初版 73.川合知二 著，林振華 譯，奈米技術入門，全華科技圖書，民國94年 74.Y.J. Gao, G.X. Chen, Y. Oli, Z.J. Zhang and Q.J. Xue, “Study on tribological of oleic acid-modified TiO2 nanoparticle in water,” Wear, Vol. 252, 2002, 454-458 75.Z.S. Hu, R. Lai, F. Lou, L.G. Wang, Z.L. Chen, G.X. Chen and J.X. Dong, “Preparation and tribological properties of nanometer magnesium borate as lubricating oil additive,” Wear, Vol. 252, 2002, 370-374 76.P.P. Ye, X.X. Jiang, S. Li and S.H. Li, “Preparation of NiMoO2S2 nanoparticle and investigation of its tribological behavior as additive in lubricating oils,” Wear, Vol. 253, 2002, 572-575 77.佐藤敏一 著，蘇品書 譯，特殊加工，復漢出版社，1984年 78.賴耿陽，超音波工學理論實務，復漢出版社，2001年3月 79.蔡文德，超音波加工之最佳化設計，國立台灣大學機械工程研究所碩士論文，民國79年 80.林良平編著，電子顯微鏡生物技術，行政院國家科學委員會編印，民國62年8月，99-104 81.陳昶瑋，含有機鉬化合物對鋼材表面磨耗機制的影響，國立台灣大學機械工程研究所碩士論文，民國92年 82.E. Usui and H. Takayama, J. Engng Ind. B82, 1960, 303 83.L. Cizaire, B. Vacher, T. Le Mogne, J.M. Martin, L. Rapoport, A. Margolin and R. Tenne, “ Mechanisms of ultra-low friction by hollow inorganic fullerene-like MoS2 nanoparticle,” Surface and Coating Technology, Vol. 160, 2002, 282-287 84.J. Kumabe, Fundamentals and application of vibration cutting, Jikkyo Publishing Co. Ltd. Japan, 1979 85.Y.D. Zhang, J.Y. Yu and C. Wang, “Influence of honing load on resonance frequency of ultrasonic honing vibration system,” Shengxue Xuebao/Acta Acustica, Vol. 19, no. 5, 1994, 367-371; zh-TW; http://ntur.lib.ntu.edu.tw/handle/246246/61287; http://ntur.lib.ntu.edu.tw/bitstream/246246/61287/1/ntu-94-D88522022-1.pdf

الاتاحة: http://ntur.lib.ntu.edu.tw/handle/246246/61287
http://ntur.lib.ntu.edu.tw/bitstream/246246/61287/1/ntu-94-D88522022-1.pdf