المؤلفون: Pichler, Niels, id_orcid:0 000-0002-8602-3291, Wang, Wandong, Li, Lingzhen, id_orcid:0 000-0001-8887-4498, Ghafoori, Elyas, id_orcid:0 000-0002-4924-0668, Motavalli, Masoud

المصدر: Engineering Structures, 326

مصطلحات موضوعية: Fe-SMA, Debonding, Cohesive zone modeling, Mode mixity, Data-driven mechanics

وصف الملف: application/application/pdf

Relation: info:eu-repo/semantics/altIdentifier/wos/001392673700001; http://hdl.handle.net/20.500.11850/713336

الاتاحة: https://hdl.handle.net/20.500.11850/713336
https://doi.org/10.3929/ethz-b-000713336

المؤلفون: Cañas Delgado, José, Blázquez Gámez, Antonio, Estefani Morales, Alejandro, Távara Mendoza, Luis Arístides

المساهمون: Universidad de Sevilla. Departamento de Mecánica de Medios Continuos y Teoría de Estructuras, Universidad de Sevilla. TEP131: Grupo de Elasticidad y Resistencia de Materiales, Junta de Andalucía, European Commission (EC). Fondo Europeo de Desarrollo Regional (FEDER), Ministerio de Economía y Competitividad (MINECO). España

مصطلحات موضوعية: Beam model, Composite laminae, Elastic interface, Fracture mode mixity, Peeling tests

Relation: Composite Structures, 285, 115106.; US-1265577; US-1266016; PGC2018-099197-B-I00; https://www.sciencedirect.com/science/article/pii/S0263822321015245; https://idus.us.es/handle//11441/154377

الاتاحة: https://idus.us.es/handle//11441/154377

المؤلفون: Argatov, Ivan I., Lyashenko, Iakov A., Popov, Valentin L.

مصطلحات موضوعية: 600 Technik, Medizin, angewandte Wissenschaften::600 Technik::600 Technik, Technologie, JKR-type adhesion, equilibrium interface energy, mode-mixity fracture toughness, Derjaguin’s law of friction, adhesive peeling, adhesive sliding, scaling method, periodic instability

وصف الملف: application/pdf

Relation: https://depositonce.tu-berlin.de/handle/11303/21988; https://doi.org/10.14279/depositonce-20789

الاتاحة: https://depositonce.tu-berlin.de/handle/11303/21988
https://doi.org/10.14279/depositonce-20789

المؤلفون: Blackman, Bamber, Sun, Fengzhen, Teixeira de Freitas, Sofia, de Barros, Silvio, Moreira Arouche, Marcio, Ivankovic, Alojz

المساهمون: Imperial College London, Tongji University, Delft University of Technology (TU Delft), Laboratoire d'Innovation Numérique pour les Entreprises et les Apprentissages au service de la Compétitivité des Territoires (LINEACT), CESI : groupe d’Enseignement Supérieur et de Formation Professionnelle (CESI), HESAM Université - Communauté d'universités et d'établissements Hautes écoles Sorbonne Arts et métiers université (HESAM)-HESAM Université - Communauté d'universités et d'établissements Hautes écoles Sorbonne Arts et métiers université (HESAM), University College Dublin Dublin (UCD)

المصدر: Advances in Structural Adhesive Bonding ; https://hal.science/hal-04239740 ; Advances in Structural Adhesive Bonding, Elsevier, pp.579-613, 2023, 978-0-323-91214-3. ⟨10.1016/B978-0-323-91214-3.00015-6⟩

مصطلحات موضوعية: Adhesive joint, Mode-mixity, Partitioning, Global approach, Local approach, Cohesive zone model, Bi-material interface, Adhesive joint mode-mixity partitioning global approach, [SPI.MECA]Engineering Sciences [physics]/Mechanics [physics.med-ph]

الاتاحة: https://hal.science/hal-04239740
https://hal.science/hal-04239740v1/document
https://hal.science/hal-04239740v1/file/CH17_Blackman.pdf
https://doi.org/10.1016/B978-0-323-91214-3.00015-6

المؤلفون: Jamal Bidadi, Hamed Saeidi Googarchin, Alireza Akhavan-Safar, Lucas F. M. da Silva

المصدر: Materials, Vol 16, Iss 24, p 7690 (2023)

مصطلحات موضوعية: mixed-mode ductile fracture, steel 304L, loading rate effect, mode mixity, Technology, Electrical engineering. Electronics. Nuclear engineering, TK1-9971, Engineering (General). Civil engineering (General), TA1-2040, Microscopy, QH201-278.5, Descriptive and experimental mechanics, QC120-168.85

Relation: https://www.mdpi.com/1996-1944/16/24/7690; https://doaj.org/toc/1996-1944; https://doaj.org/article/2616ea0e574c4ceda196672da56da6a9

الاتاحة: https://doi.org/10.3390/ma16247690
https://doaj.org/article/2616ea0e574c4ceda196672da56da6a9

المؤلفون: Markus Alfreider, Glenn Balbus, Fulin Wang, Johannes Zechner, Daniel S. Gianola, Daniel Kiener

المصدر: Materials & Design, Vol 223, Iss , Pp 111136- (2022)

مصطلحات موضوعية: Mode mixity, Interface toughness, Thin films, Crack extension, TSEM, Materials of engineering and construction. Mechanics of materials, TA401-492

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S0264127522007584; https://doaj.org/toc/0264-1275

URL الوصول: https://doaj.org/article/e1bedfbde2ea4ad7a0f7d3d88df4f409

المؤلفون: Eplett, Matthew R.

مصطلحات موضوعية: 620.1, Composite materials, Delamination, Fracture toughness, Mixed-mode tests, Mixed-mode partition, Mode mixity

URL الوصول: https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.727738

المؤلفون: Aranda Romero, María Teresa, García García, Israel, Reinoso Cuevas, José Antonio, Mantic, Vladislav

المساهمون: Universidad de Sevilla. Departamento de Mecánica de Medios Continuos y Teoría de Estructuras, Universidad de Sevilla. TEP131: Elasticidad y Resistencia de Materiales

مصطلحات موضوعية: Brazilian test, Fracture mode mixity, Interface crack, Interface fracture energy

Relation: Engineering Fracture Mechanics, 259, 108076.; MAT2015-71036-P; UNSE 15-CE-3581; P18-FR-1928; PGC2018-099197-B-I00; US-1265577; US-1266016; https://www.sciencedirect.com/science/article/pii/S0013794421004884; https://idus.us.es/handle//11441/132652

الاتاحة: https://idus.us.es/handle//11441/132652

المؤلفون: Mikkelsen, Lars P., Legarth, Brian N., Herrmann, Leon, Christensen, Mikkel M., Niordson, Christian F.

المصدر: Mikkelsen , L P , Legarth , B N , Herrmann , L , Christensen , M M & Niordson , C F 2022 , ' A special finite element method applied to off-axis tunnel cracking in laminates ' , Engineering Fracture Mechanics , vol. 268 , 108387 . https://doi.org/10.5281/zenodo.5830587 , https://doi.org/10.1016/j.engfracmech.2022.108387

مصطلحات موضوعية: Energy release rate, Mode-mixity, User elements, Composites

وصف الملف: application/pdf

Relation: https://orbit.dtu.dk/en/publications/73558c22-3ba7-4567-be61-a476e2c6c832

الاتاحة: https://orbit.dtu.dk/en/publications/73558c22-3ba7-4567-be61-a476e2c6c832
https://doi.org/10.5281/zenodo.5830587
https://backend.orbit.dtu.dk/ws/files/271734104/2D_tunnel_crack_paper.pdf
https://backend.orbit.dtu.dk/ws/files/274558244/1_s2.0_S0013794422001436_main.pdf

المؤلفون: Avanzini A., Tomasoni M., Xu Z., Berto F., Razavi N.

المساهمون: Avanzini, A., Tomasoni, M., Xu, Z., Berto, F., Razavi, N.

مصطلحات موضوعية: Additive Manufacturing, ASED, Mode mixity, Notch, Polyamide 12

Relation: volume:303; journal:ENGINEERING FRACTURE MECHANICS; https://hdl.handle.net/11573/1721501

الاتاحة: https://hdl.handle.net/11573/1721501
https://doi.org/10.1016/j.engfracmech.2024.110118

المؤلفون: Zhao, Dawei, Letz, Sebastian, Jank, Michael, März, Martin

مصطلحات موضوعية: Adhesion strength characterization, Cohesive zone model, Cross-sectional nanoindentation, Ductile thin film, Finite element analysis, Mode mixity

Relation: International journal of mechanical sciences; https://publica.fraunhofer.de/handle/publica/463885

الاتاحة: https://publica.fraunhofer.de/handle/publica/463885
https://doi.org/10.1016/j.ijmecsci.2024.109103

المؤلفون: Maurel, Vincent, Chiaruttini, Vincent, Abecassis, Manon, Köster, Alain, Dezecot, Sébastien

المساهمون: Centre des Matériaux (CDM), Mines Paris - PSL (École nationale supérieure des mines de Paris), Université Paris Sciences et Lettres (PSL)-Université Paris Sciences et Lettres (PSL)-Centre National de la Recherche Scientifique (CNRS), DMAS, ONERA, Université Paris Saclay Châtillon, ONERA-Université Paris-Saclay, Matériaux, ingénierie et science Villeurbanne (MATEIS), Université Claude Bernard Lyon 1 (UCBL), Université de Lyon-Université de Lyon-Institut National des Sciences Appliquées de Lyon (INSA Lyon), Université de Lyon-Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS), ANR-14-CE07-0037,SEMAFOR,Simulation et caractérisation ExpériMentAle de la FissuratiOn en plasticité généRalisée(2014)

المصدر: ISSN: 0167-8442 ; Theoretical and Applied Fracture Mechanics ; https://hal.science/hal-02873578 ; Theoretical and Applied Fracture Mechanics, 2020, 108, pp.102570. ⟨10.1016/j.tafmec.2020.102570⟩.

مصطلحات موضوعية: Fatigue crack growth, titanium based alloys, integral J, mode mixity, [SPI]Engineering Sciences [physics], [PHYS]Physics [physics], [CHIM]Chemical Sciences

الاتاحة: https://hal.science/hal-02873578
https://hal.science/hal-02873578v1/document
https://hal.science/hal-02873578v1/file/DMAS20034.1592479180_postprint.pdf
https://doi.org/10.1016/j.tafmec.2020.102570

المؤلفون: Papangelo A., Cricri' G., Ciavarella M.

المساهمون: Papangelo, A., Cricri', G., Ciavarella, M.

مصطلحات موضوعية: Adhesion, Contact mechanic, Fracture mechanic, Friction, Mode-mixity

Relation: info:eu-repo/semantics/altIdentifier/wos/WOS:000571473500002; volume:144; journal:JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS; http://hdl.handle.net/11588/838027; info:eu-repo/semantics/altIdentifier/scopus/2-s2.0-85088637685

الاتاحة: http://hdl.handle.net/11588/838027
https://doi.org/10.1016/j.jmps.2020.104099

المؤلفون: Doitrand, Aurélien, Leguillon, Dominique, Estevez, Rafael

المساهمون: Matériaux, ingénierie et science Villeurbanne (MATEIS), Université Claude Bernard Lyon 1 (UCBL), Université de Lyon-Université de Lyon-Institut National des Sciences Appliquées de Lyon (INSA Lyon), Université de Lyon-Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS), Institut Jean Le Rond d'Alembert (DALEMBERT), Université Pierre et Marie Curie - Paris 6 (UPMC)-Centre National de la Recherche Scientifique (CNRS), Science et Ingénierie des Matériaux et Procédés (SIMaP), Institut de Chimie - CNRS Chimie (INC-CNRS)-Centre National de la Recherche Scientifique (CNRS)-Université Grenoble Alpes (UGA)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP), Université Grenoble Alpes (UGA)

المصدر: ISSN: 0013-7944 ; Engineering Fracture Mechanics ; https://hal.science/hal-02780524 ; Engineering Fracture Mechanics, 2020, 230, pp.106980. ⟨10.1016/j.engfracmech.2020.106980⟩.

مصطلحات موضوعية: Generalized stress intensity factors, Digital Image Correlation, Square hole, Mode mixity, [SPI.MAT]Engineering Sciences [physics]/Materials, [SPI.MECA.MEMA]Engineering Sciences [physics]/Mechanics [physics.med-ph]/Mechanics of materials [physics.class-ph]

الاتاحة: https://hal.science/hal-02780524
https://hal.science/hal-02780524v1/document
https://hal.science/hal-02780524v1/file/main_NoHighlights.pdf
https://doi.org/10.1016/j.engfracmech.2020.106980

المؤلفون: van de Looij-Kleinendorst, Sandra M., Fleerakkers, Rob, Cattarinuzzi, Emanuele, Vena, Pasquale, Gastaldi, Dario, van Maris, Marc P.F.H.L., Hoefnagels, Johan P.M.

المصدر: van de Looij-Kleinendorst , S M , Fleerakkers , R , Cattarinuzzi , E , Vena , P , Gastaldi , D , van Maris , M P F H L & Hoefnagels , J P M 2020 , ' Micron-scale experimental-numerical characterization of metal-polymer interface delamination in stretchable electronics interconnects ' , International Journal of Solids and Structures , vol. 204-205 , pp. 52-64 . https://doi.org/10.1016/j.ijsolstr.2020.08.011

مصطلحات موضوعية: Interface delamination, Stretchable electronics, Cohesive zones, Experimental characterization, Numerical characterization, Mode mixity, Digital height correlation, Buckling

وصف الملف: application/pdf

Relation: https://research.tue.nl/en/publications/c7ec12f8-3d81-47ab-b61c-aaf9770b1a91

الاتاحة: https://research.tue.nl/en/publications/c7ec12f8-3d81-47ab-b61c-aaf9770b1a91
https://doi.org/10.1016/j.ijsolstr.2020.08.011
https://pure.tue.nl/ws/files/314717892/1-s2.0-S0020768320303103-main.pdf
http://www.scopus.com/inward/record.url?scp=85090041970&partnerID=8YFLogxK

المؤلفون: Saseendran, Vishnu, Berggreen, Christian, Krueger, Ronald

المصدر: Saseendran , V , Berggreen , C & Krueger , R 2020 , ' Mode mixity analysis of face/core debonds in a single cantilever beam sandwich specimen ' , Journal of Sandwich Structures and Materials , vol. 22 , no. 6 , pp. 1879–1909 . https://doi.org/10.1177/1099636218788223

مصطلحات موضوعية: Single cantilever beam, Sandwich, Debond, Mode mixity, Face/core interface, Phase angle, CSDE

وصف الملف: application/pdf

Relation: https://orbit.dtu.dk/en/publications/ba2bf85d-2fee-4d05-96c1-08afb1108fc7

الاتاحة: https://orbit.dtu.dk/en/publications/ba2bf85d-2fee-4d05-96c1-08afb1108fc7
https://doi.org/10.1177/1099636218788223
https://backend.orbit.dtu.dk/ws/files/269924562/20190028313.pdf

المؤلفون: Mikkelsen, Lars P., Klitgaard, Simon J., Niordson, Christian F., Sørensen, Bent F.

المصدر: Mikkelsen , L P , Klitgaard , S J , Niordson , C F & Sørensen , B F 2020 , ' Tunneling cracks in arbitrary oriented off-axis lamina ' , International Journal of Fracture , vol. 226 , pp. 161-179 . https://doi.org/10.1007/s10704-020-00485-9

مصطلحات موضوعية: Finite element model, Fracture toughness, J-integral, Composite materials, Orthotropic materials, Laminate, Mode-mixity

وصف الملف: application/pdf

Relation: https://orbit.dtu.dk/en/publications/d30ddc8d-9730-40b8-a531-66745f796485

الاتاحة: https://orbit.dtu.dk/en/publications/d30ddc8d-9730-40b8-a531-66745f796485
https://doi.org/10.1007/s10704-020-00485-9
https://backend.orbit.dtu.dk/ws/files/222356068/Tunnel_cracking_Final.pdf
https://link.springer.com/article/10.1007/s10704-020-00485-9

المؤلفون: Papangelo A., Ciavarella M.

المساهمون: Papangelo, A., Ciavarella, M.

مصطلحات موضوعية: Adhesion, Contact area shrinking, Contact mechanic, Friction, Mode-mixity

وصف الملف: STAMPA

Relation: info:eu-repo/semantics/altIdentifier/wos/WOS:000459368300009; volume:124; firstpage:159; lastpage:171; numberofpages:13; journal:JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS; http://hdl.handle.net/11589/175768; info:eu-repo/semantics/altIdentifier/scopus/2-s2.0-85055046525

الاتاحة: http://hdl.handle.net/11589/175768
https://doi.org/10.1016/j.jmps.2018.10.011

المؤلفون: Andersen, R. G., Nielsen, K. L., Legarth, B. N.

المصدر: Andersen , R G , Nielsen , K L & Legarth , B N 2019 , ' Void-by-void versus multiple void interaction under mode I-mode II or mode I-mode III loading conditions ' , Engineering Fracture Mechanics , vol. 214 , pp. 248-259 . https://doi.org/10.1016/j.engfracmech.2019.02.031

مصطلحات موضوعية: Ductile fracture, Fracture toughness, Void interaction, Mode mixity

وصف الملف: application/pdf

Relation: https://orbit.dtu.dk/en/publications/a4ce333a-3d37-4ffb-b195-98a175f8008b

الاتاحة: https://orbit.dtu.dk/en/publications/a4ce333a-3d37-4ffb-b195-98a175f8008b
https://doi.org/10.1016/j.engfracmech.2019.02.031
https://backend.orbit.dtu.dk/ws/files/169851277/Post_printORBIT.pdf

المؤلفون: Farshidi, Arash, Berggreen, Christian

المصدر: Farshidi , A & Berggreen , C 2023 , ' Face/core disbond fatigue growth in honeycomb cored aircraft sandwich elements under mixed mode flatwise tension loading ' , Journal of Sandwich Structures and Materials , vol. 25 , no. 1 , pp. 23-43 . https://doi.org/10.1177/10996362221115420

مصطلحات موضوعية: Sandwich disbond/debond, honeycomb core, Aircraft element, Mixed-mode characterization, Sandwich tearing test, Crack growth rate, Mode-mixity, Fracture toughness

Relation: https://orbit.dtu.dk/en/publications/697d7799-0002-4d77-bb6a-813d118f3b8f

الاتاحة: https://orbit.dtu.dk/en/publications/697d7799-0002-4d77-bb6a-813d118f3b8f
https://doi.org/10.1177/10996362221115420