المؤلفون: Héctor Hugo Riojas-González, Liborio Jesús Bortoni-Anzures, Juan Julián Martínez-Torres

المصدر: AiBi Revista de Investigación, Administración e Ingeniería, Vol 12, Iss 2 (2024)

مصطلحات موضوعية: inyección, cámara de combustión, biodiesel, alcohol, Engineering (General). Civil engineering (General), TA1-2040

وصف الملف: electronic resource

Relation: https://revistas.udes.edu.co/aibi/article/view/3734; https://doaj.org/toc/2346-030X

URL الوصول: https://doaj.org/article/77acc086a3034bcabf8a0f5ac6e823f9

المؤلفون: Bermúdez-Santaella, José Ricardo, Suarez –Sierra, Oscar Javier, Cabello-Eras , Juan José

المصدر: Revista Respuestas; ##issue.vol## 28 ##issue.no## 2 (2023): MAYO - AGOSTO 2023; 69-94 ; Respuestas; Vol. 28 Núm. 2 (2023): MAYO - AGOSTO 2023; 69-94 ; 2422-5053 ; 0122-820X

مصطلحات موضوعية: Turbocargadores, Banco de pruebas, Modelo matemático, Simulación, Cámara de combustión, Turbochargers, Testing Bench, Mathematical model, Simulation, Combustion chamber

وصف الملف: application/pdf

Relation: https://revistas.ufps.edu.co/index.php/respuestas/article/view/3868/4869; L. G. Sánchez, M. de J. Fabela, O. Flores, J. R. Hernández, D. Vázquez, and M. E. Cruz, “Revisión de la Normativa Internacional sobre Límites de Emisiones Contaminantes de Vehículos de Carretera,” Instituto mexicano del transporte, no. 562. p. 83, 2019, [Online]. Available: https://imt.mx/archivos/Publicaciones/PublicacionTecnica/pt562.pdf. [2] P. Galbraith and G. Stillman, “A framework for identifying student blockages during transitions in the modelling process,” ZDM - Int. J. Math. Educ., vol. 38, no. 2, pp. 143–162, 2006, doi:10.1007/BF02655886. [3] M. L. R. Palmero;, J. M. Acosta, and M. A. Moreira, “La teoría de los modelos mentales de johnson-laird y sus principios: una aplicación con modelos mentales de célula en estudiantes del curso de orientación universitaria,” Investig. em Ensino Ciências, vol. 6, no. 3, pp. 243–268, 2001. [4] R. G. Sargent, “Verification and validation of simulation models,” Simulation Research Group, New York, p. 10, 1984. [5] Kishurim, Tecnice, Cognitek, Tecnimat, Griduc, and Gidsaw, El modelamiento matemático en la formación del ingeniero, Primera ed. Bogota: Ediciones Fundación Universidad Central, 2013. [6] C. Turnitsa, J. J. Padilla, and A. Tolk, “Ontology for modeling and simulation,” Proc. - Winter Simul. Conf., pp. 643–651, 2010, doi:10.1109/WSC.2010.5679124. [7] J. B. Heywood, “Combustion and its Modeling in Spark-Ignition Engines,” International Symposium COMODIA 94. pp. 1–15, 1994. [8] J. Arrègle, J. J. López, J. M. García, and C. Fenollosa, “Development of a zero-dimensional Diesel combustion model. Part 1: Analysis of the quasi-steady diffusion combustion phase,” Appl. Therm. Eng., vol. 23, no. 11, pp. 1301–1317, 2003, doi:10.1016/S1359-4311(03)00079-6. [9] F. V. Bracco, “Introducing a new generation of more detailed and informative combustion models,” SAE Tech. Pap., 1975, doi:10.4271/751187. [10] J. M. Luján, V. Bermúdez, J. R. Serrano, and C. Cervelló, “Test bench for turbocharger groups characterization,” SAE Technical Papers, p. 8, 2002. [11] M. Capobianco and S. Marelli, “Transient Performance of Automotive Turbochargers: Test Facility and Preliminary Experimental Analysis,” in SAE Technical Papers, 2005, vol. 2005-Septe, p. 11, doi:10.4271/2005-24-066. [12] O. Leufvén, “Compressor Modeling for Control of Automotive Two Stage Turbochargers,” Linköpings universitet, 2010. [13] A. W. Costall, R. M. McDavid, R. F. Martinez-Botas, and N. C. Baines, “Pulse performance modeling of a twin entry turbocharger turbine under full and unequal admission,” J. Turbomach., vol. 133, no. 2, pp. 1–9, 2011, doi:10.1115/1.4000566. [14] A. Blazevic and I. Filipovic, “Turbochargers performance testing with special emphasis on the compressor map,” in 11th International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology, 2013, no. May 2016, pp. 961–968. [15] A. T. Thompson, “The effect of altitude on turbocharger performance parameters for heavy duty diesel engines: experiments and gt-power modeling,” Colorado State University, 2014. [16] A. Calo, “Advanced Characterisation of Turbochargers with the focus of Modelling Two-stage Turbocharging Systems Calogero Avola A thesis submitted for the degree of Doctor of Philosophy Department of Mechanical Engineering,” University of Bath, 2017. [17] F. A. R. Filho, R. M. Valle, J. E. M. Barros, and S. D. M. Hanriot, “Automotive turbocharger maps building using a flux test stand,” in SAE Technical Papers, 2002, p. 10, doi:10.4271/2002-01-3542. [18] C. Holt, L. S. Andrés, S. Sahay, P. Tang, G. La Rue, and K. Gjika, “Test Response of a Turbocharger Supported on Floating Ring Bearings - Part I: Assessment of Subsynchronous Motions,” in Proceedings of the ASME Design Engineering Technical Conference, 2003, vol. 5 B, pp. 969–974, doi:10.1115/detc2003/vib-48418. [19] M. I. Bin Othman, “Design and Build a Turbocharger Stad and Airflow Circuit Piping for an Automotive Turbocharger Testing Apparatus,” Universiti Malaysia Pahang, 2008. [20] B. S. G. Gregory David Uhlenhake, “Characterization of turbocharger performance and surge in a new experimental facility,” The Ohio State University, 2010. [21] P. Olmeda, A. Tiseira, V. Dolz, and L. M. García-Cuevas, “Uncertainties in power computations in a turbocharger test bench,” Meas. J. Int. Meas. Confed., vol. 59, pp. 363–371, 2015, doi:10.1016/j.measurement.2014.09.055. [22] M. Cormerais, P. Chesse, and J. F. Hetet, “Turbocharger heat transfer modeling under steady and transient conditions,” Int. J. Thermodyn., vol. 12, no. 4, pp. 193–202, 2009, doi:10.5541/ijot.1034000257. [23] H. Mohtar, “Increasing Surge Margin of Turbocharger Centrifugal Compressor Automotive Application,” Ecole Centrale de Nantes, 2010. [24] J. R. Serrano, P. Olmeda, A. Tiseira, L. M. García-Cuevas, and A. Lefebvre, “Theoretical and experimental study of mechanical losses inautomotive turbochargers,” Energy, vol. 55, pp. 888–898, Jun. 2013, doi:10.1016/j.energy.2013.04.042. [25] G. S. Chesse;D.Chalet, “Experimental Study of Automotive Turbocharger Turbine Performance Maps Extrapolation,” SAE Tech. Pap., vol. 2016-April, no. April, 2016, doi:10.4271/2016-01-1034. [26] D. Tomasz, “Turbocharger performance and surge definition on a steady flow turbocharger test stand,” University of BATH, 2019. [27] A. O. Mo. German, “Reconstrucción y diseño de una turboturbina,” Universidad de los Andes (Bogota), 2007. [28] G. G. Venson and J. E. M. Barros, “Turbocharger performance maps building using a hot gas test stand,” in Proceedings of the ASME Turbo Expo, 2008, pp. 777–785, doi:10.1115/GT2008-50994. [29] D. Naundorf and H. Bolz, “Turbocharger test stand with a hot gas generator for high-performance supercharging systems,” MTZ worldwide, vol. 69, no. 10. pp. 22–24, 2008, doi:10.1007/bf03226916. [30] R. Vijayakumar et al., “Design and testing a bespoke cylinder head pulsating flow generator for a turbocharger gas stand,” Energy, vol. 189, p. 116291, 2019, doi:10.1016/j.energy.2019.116291. [31] A. Andrearczyk, “Flow characteristics of an automotive compressor with an additively manufactured rotor disc,” Arch. Thermodyn., vol. 42, no. 1, pp. 3–13, 2021, doi:10.24425/ather.2021.136944. [32] A. A. Schmidt, J. Plánka, T. Schmidt, O. Grabherr, and D. Bartel, “Validation of a dry sliding wear simulation method for wastegate bearings in automotive turbochargers,” Tribol. Int., vol. 155, p. 106711, 2021, doi:10.1016/j.triboint.2020.106711. [33] S. Mousavi, A. Nejat, S. S. Alaviyoun, and M. Nejat, “An Integrated Turbocharger Matching Program for Internal Combustion Engines,” J. Appl. Fluid Mech., vol. 14, no. 4, pp. 1209–1222, 2021, doi:10.47176/JAFM.14.04.32037. [34] S. S. Alaviyoun and M. Ziabasharhagh, “Experimental thermal survey of automotive turbocharger,” Int. J. Engine Res., vol. 21, no. 5, pp. 766–780, 2020, doi:10.1177/1468087418778987. [35] R. R. Erdmenger et al., “Development of a new low-cost tandem variable geometry turbocharging concept for turbocharger applications,” J. Eng. Gas Turbines Power, vol. 141, no. 3, pp. 1–10, 2019, doi:10.1115/1.4041279. [36] R. McMullen and Y. Pino, “Conditioning Turbocharger Compressor Map Data for Use in Engine Performance Simulation,” SAE Int. J. Engines, vol. 11, no. 4, pp. 491–507, 2018, doi:10.4271/03-11-04-0033. [37] J. E. Chung, J. W. Chung, N. H. Kim, S. W. Lee, and G. Y. Kim, “An investigation on the efficiency correction method of the turbocharger at low speed,” Energies, vol. 11, no. 2, pp. 1–14, 2018, doi:10.3390/en11020269. [38] B. Wu, Z. Han, X. Yu, S. Zhang, X. Nie, and W. Su, “A method for matching two-stage turbocharger system and its influence on engine performance,” J. Eng. Gas Turbines Power, vol. 141, no. 5, p. 18, 2018, doi:10.1115/1.4039461. [39] John Heywood, Internal Combustion Engine Fundamentals, Second edi. New York, 2018. [40] A. Romagnoli et al., “A review of heat transfer in turbochargers,” Renew. Sustain. Energy Rev., vol. 79, no. April, pp. 1442–1460, 2017, doi:10.1016/j.rser.2017.04.119. [41] B. Remy, B. Bou-Saïd, and T. Lamquin, “Fluid inertia and energy dissipation in turbocharger thrust bearings,” Tribol. Int., vol. 95, pp. 139–146, 2016, doi:10.1016/j.triboint.2015.11.014. [42] Q. Wang, J. Ni, X. Shi, and Y. Liu, “Gasoline Engine Turbocharger Matching Based on Vehicle Performance Requirements,” SAE Tech. Pap., vol. 2015-April, no. April, 2015, doi:10.4271/2015-01-1283. [43] N. F. Sakellaridis, S. I. Raptotasios, A. K. Antonopoulos, G. C. Mavropoulos, and D. T. Hountalas, “Development and validation of a new turbocharger simulation methodology for marine two stroke diesel engine modelling and diagnostic applications,” Energy, vol. 91, no. January, pp. 952–966, 2015, doi:10.1016/j.energy.2015.08.049. [44] J. R. Serrano, P. Olmeda, F. J. Arnau, M. A. Reyes-Belmonte, and H. Tartoussi, “A study on the internal convection in small turbochargers. Proposal of heat transfer convective coefficients,” Appl. Therm. Eng., vol. 89, pp. 587–599, 2015, doi:10.1016/j.applthermaleng.2015.06.053. [45] S. Zhu, K. Deng, and S. Liu, “Modeling and extrapolating mass flow characteristics of a radial turbocharger turbine,” Energy, vol. 87, pp. 628–637, 2015, doi:10.1016/j.energy.2015.05.032. [46] F. Payri, P. Olmeda, F. J. Arnau, A. Dombrovsky, and L. Smith, “External heat losses in small turbochargers: Model and experiments,” Energy, vol. 71, pp. 534–546, Jul. 2014, doi:10.1016/j.energy.2014.04.096. [47] J. Fu et al., “A comparative study on various turbocharging approaches based on IC engine exhaust gas energy recovery,” Appl. Energy, vol. 113, pp. 248–257, 2014, doi:10.1016/j.apenergy.2013.07.023. [48] G. Liśkiewicz, L. Horodko, M. Stickland, and W. Kryłłowicz, “Identification of phenomena preceding blower surge by means of pressure spectral maps,” Exp. Therm. Fluid Sci., vol. 54, pp. 267–278, 2014, doi:10.1016/j.expthermflusci.2014.01.002. [49] X. Fang, W. Chen, Z. Zhou, and Y. Xu, “Empirical models for efficiency and mass flow rate of centrifugal compressors,” Int. J. Refrig., vol. 41, pp. 190–199, 2014, doi:10.1016/j.ijrefrig.2014.03.005. [50] N. Sakellaridis and D. Hountalas, “Meanline modeling of radial turbine performance for turbocharger simulation and diagnostic applications,” SAE Technical Papers, p. 13, 2013. [51] M. Deligant, P. Podevin, and G. Descombes, “Experimental identification of turbocharger mechanical friction losses,” Energy, vol. 39, no. 1, pp. 388–394, 2012, doi:10.1016/j.energy.2011.12.049. [52] H. Nguyen-Schäfer, Rotordynamics of Automotive Turbochargers. 2012. [53] M. Nakhjiri, P. Pelz, B. Matyschok, L. Däubler, and A. Horn, “Physical modeling of automotive turbocharger compressor: Analytical approach and validation,” SAE Technical Papers, p. 14, 2011. [54] X. Fang and Q. Dai, “Modeling of turbine mass flow rate performances using the Taylor expansion,” Appl. Therm. Eng., vol. 30, no. 13, pp. 1824–1831, 2010, doi:10.1016/j.applthermaleng.2010.04.016. [55] M. Canova, F. Chiara, G. Rizzoni, and Y. Y. Wang, “Model-based characterization and analysis of diesel engines with two-stage turbochargers,” SAE Tech. Pap., no. April, 2010, doi:10.4271/2010-01-1220. [56] F. Bozza and V. De Bellis, “Steady and unsteady modeling of turbocharger compressors for automotive engines,” SAE Tech. Pap., 2010, doi:10.4271/2010-01-1536. [57] D. Japikse, “Turbomachinery performance modeling,” SAE Technical Papers, p. 26, 2009. [58] Guillaume Martin and Vincent Talon, “Implementing Turbomachinery Physics into Data Map-Based Turbocharger Models,” SAE Int., vol. 2, no. 1, pp. 211–229, 2009. [59] W. Zhuge, Y. Zhang, X. Zheng, M. Yang, and Y. He, “Development of an advanced turbocharger simulation method for cycle simulation of turbocharged internal combustion engines,” Proc. Inst. Mech. Eng. Part D J. Automob. Eng., vol. 223, no. 5, pp. 661–672, 2009, doi:10.1243/09544070JAUTO975. [60] J. R. Serrano, F. J. Arnau, V. Dolz, A. Tiseira, and C. Cervelló, “A model of turbocharger radial turbines appropriate to be used in zero- and one-dimensional gas dynamics codes for internal combustion engines modelling,” Energy Convers. Manag., vol. 49, no. 12, pp. 3729–3745, 2008, doi:10.1016/j.enconman.2008.06.031. [61] M. Cormerais, J. F. Hetet, P. Chesse, and A. Maiboom, “Heat Transfer Analysis in a Turbocharger Compressor: Modeling and Experiments,” Copyright © 2006 SAE International, p. 12, 2006. [62] S. Arnold, C. Balis, D. Jeckel, S. Larcher, P. Uhl, and S. M. Shahed, “Advances in turbocharging technology and its impact on meeting proposed California GHG emission regulations,” SAE Technical Papers, no. 724, p. 16, 2005. [63] W. Yousef, V. Sychenkov, N. Davydov, V. Varsegov, and R. Khaliulin, “Experimental investigation of a two-zone dry low emission gas turbine combustor,” Procedia Environ. Sci. Eng. Manag., vol. 8, no. 1, pp. 275–281, 2021. [64] W. O. Irrazabal Bohorquez, J. P. Dutra, C. Martinez-Bazan, F. Cruz Peragón, and C. Gutiérrez-Montes, “The Effects of Burning Alcohol Fuels in Fuel Flexible Annular Gas Turbine Combustors on the Overall Operating Conditions,” in 18th Brazilian Congress of Thermal Sciences and Engineering, 2020, p. 10, doi:10.26678/abcm.encit2020.cit20-0485. [65] M. Nalla Mohamed and R. Sivaprasad, “CFD simulation for the design of combustor in turbocharger test rig,” AIP Conf. Proc., vol. 2161, no. October, 2019, doi:10.1063/1.5127597. [66] T. M. Onose Araujo Cunha and R. E. Pereira Silva, “Dimensioning of a Combustion Chamber for Microturbine Based on Automotive Turbocharger,” in 17th Brazilian Congress of Thermal Sciences and Engineering, 2018, no. November, p. 10, doi:10.26678/abcm.encit2018.cit18-0670. [67] D. V. Pinto, “Análise comparativa do desempenho de turbocompressores veiculares com câmara de combustão tubular na microgeração de energia,” Universidade de Caxias do Sul, 2017. [68] S. P. Díaz, “Obtención de un Modelo Dinámico para Simulación de una Caldera de Vapor Industrial,” Planta, Valldolid (España), p. 8, 2016. [69] J. Peñalba Galán, “Modelado y Simulación de una Caldera Convencional.” p. 99, 2004. [70] E. Brizuela and S. D. Romano, “Análisis de la combustión completa e incompleta,” in Capitulo libro, vol. 2, 2003, pp. 24–48. [71] H. P. G. J. A. Cabrera Rodriguez, J. A. Barroso Estebanez, “Consideraciones sobre una cámara de combustión experimental de 400 kW,” Ing. Mecánica, vol. 3, no. 2, pp. 37-41–41, 2000. [72] T. T. K. C. Holden, “Modeling and Control of a Wet-Gas Centrifugal Compressor,” IEEE Transactions On Control Systems Technology, p. 16, 2020. [73] M. Shafieian, M. Zavar, and M. Rahmanian, “Simulation and control of surge phenomenon in centrifugal compressors,” Trait. du Signal, vol. 36, no. 3, pp. 259–264, 2019, doi:10.18280/ts.360309. [74] A. M. Danilishin, Y. V. Kozhukhov, S. V. Kartashov, A. A. Lebedev, K. G. Malev, and Y. R. Mironov, “Design optimization opportunity of the end stage output plenum chamber of the centrifugal compressor for gas pumping unit,” AIP Conference Proceedings, p. 9, 2018. [75] Y. Sheoran, B. Bouldin, R. Hoover, and M. Matwey, “A centrifugal compressor operability correlation with combined total pressure and swirl distortion,” in Proceedings of the ASME Turbo Expo, 2017, vol. 1, pp. 1–11, doi:10.1115/GT2017-63721. [76] F. Grapow and G. Liśkiewicz, “Compressor modeling using Greitzer model validated by pressure oscillations,” Trans. Inst. Fluid-Flow Mach., vol. 133, pp. 69--89, 2016. [77] N. Uddin and J. T. Gravdahl, “Bond graph modeling of centrifugal compression systems,” Simulation, vol. 91, no. 11, pp. 998–1013, 2015, doi:10.1177/0037549715612124. [78] X. Zheng and A. Liu, “Phenomenon and mechanism of two-regime-surge in a centrifugal compressor,” J. Turbomach., vol. 137, no. 8, pp. 1–7, 2015, doi:10.1115/1.4029547. [79] A. Hafaifa, B. Rachid, and G. Mouloud, “Modelling of surge phenomena in a centrifugal compressor: Experimental analysis for control,” Syst. Sci. Control Eng., vol. 2, no. 1, pp. 632–641, 2014, doi:10.1080/21642583.2014.956269. [80] S. Y. Yoon, Z. Lin, C. Goyne, and P. E. Allaire, “An enhanced Greitzer compressor model including pipeline dynamics and surge,” in Journal of Vibration and Acoustics, Transactions of the ASME, 2011, vol. 133, no. 5, pp. 4731–4736, doi:10.1115/1.4003937. [81] F. Synák, A. Kalašová, and J. Synák, “Air filter and selected vehicle characteristics,” Sustain., vol. 12, no. 22, pp. 1–19, 2020, doi:10.3390/su12229326. [82] Y. Sheng, Q. Ren, L. Zhang, and Y. Wang, “Modeling and simulation of DEHS aerosol filtration by a three-dimensional knitted spacer air filter,” Build. Environ., vol. 186, no. October, p. 107365, 2020, doi:10.1016/j.buildenv.2020.107365. [83] J. C. Laborde, L. D. E. L. Fabbro, V. M. Mocho, and L. Ricciardi, “Contribution To the Modelling of Industrial Pleated,” Comunicacion. p. 9, 2019. [84] M. Toma, C. Stan, and I. Fileru, “The restriction produced by the air filtration system versus the restriction produced by the air filter,” in MATEC Web of Conferences, 2018, vol. 178, p. 6, doi:10.1051/matecconf/201817809002. [85] F. Landolsi, H. Jammoussi, and I. Makki, “Air filter diagnostics & prognostics in naturally aspired engines,” in 2017 IEEE International Conference on Prognostics and Health Management, ICPHM 2017, 2017, pp. 61–65, doi:10.1109/ICPHM.2017.7998306. [86] S. R. Vishal, K. O. Prataprao, N. A. Pravin, and A. Rammohan, “Investigation of effect of air filter clogging on performance and emissions from engine,” 2017 International Conference on Microelectronic Devices, Circuits and Systems, ICMDCS 2017, pp. 1–6, 2017. [87] L. M. Janutienė, Kandrotaitė and A. H. Habil, “Analysis and modelling of automotive air filter as a substitute for powercore item,” in International Scientific Journal, 2017, vol. V, no. 6, pp. 223–226. [88] Y. Wang et al., “Modeling Study of Metal Fiber Diesel Particulate Filter Performance,” SAE Technical Papers, no. April, p. 8, 2015. [89] A. M. Saleh and H. Vahedi Tafreshi, “A simple semi-numerical model for designing pleated air filters under dust loading,” Sep. Purif. Technol., vol. 137, pp. 94–108, 2014, doi:10.1016/j.seppur.2014.09.029. [90] M. Ward, “Modeling Filter Bypass: Impact on Filter Efficiency,” ASHRAE Transactions, p. 11, 2010.; https://revistas.ufps.edu.co/index.php/respuestas/article/view/3868

الاتاحة: https://revistas.ufps.edu.co/index.php/respuestas/article/view/3868
https://doi.org/10.22463/0122820X.3868

المؤلفون: Rivera, Andrea del Pilar Fabra, Jiménez, Francys Marcel Rodríguez, Santaella, José Ricardo Bermúdez, Rubio, Juan Carlos Campos

المصدر: Matéria (Rio de Janeiro). January 2020 25(3)

مصطلحات موضوعية: modelo matemático, relación aire combustible, Simulink®, cámara de combustión, sistema

وصف الملف: text/html

URL الوصول: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1517-70762020000300331

المؤلفون: Pérez Giraldo, Joshua Hamith

المساهمون: Gordillo Ariza, Gerardo

مصطلحات موضوعية: Flujo másico, Hornilla panelera, Eficiencia, Combustión, Exceso de aire, Diametro hidráulico, Flujo turbulento, Cámara de combustión, Parrilla, Bagazo de caña, Pérdidas de carga en tubería, Ingeniería

وصف الملف: 11 páginas; application/pdf

Relation: G. Gordillo Ariza, "Hornillas Paneleras," Revista de Ingeniería, pp. 137-150, 1994.; G. Gordillo Ariza and M. A. López, "Simulación de una cámara de combustión de bagazo de caña de azúcar en un horno panelero," Ingeniería y Desarrollo, no. 28, pp. 33-42, 2010.; G. Gordillo Ariza and G. Rincón, "Diseño y construcción de una cámara de combustión de bagazo de caña," Revista Facultad de Ingeniería Universidad de Antioquia, no. 34, pp. 31-40, 2005.; García, H.R. (2010b) (PDF) Hornillas para la producción de panela - researchgate. Available at: https://www.researchgate.net/publication/306375186_Hornillas_para_la_produccion_de_panela (Accessed: 13 January 2024).; Agrosavia Hornillas paneleras ecoeficientes tipo CIMPA, Colombia potencia de la vida. Available at: https://www.agrosavia.co/productos y-servicios/oferta tecnol%C3%B3gica/l%C3%ADnea agr%C3%ADcola/cultivos-transitorios-y agroindustriales/maquinariaequipos-instrumentos-y herramientas/132-hornillas-paneleras-ecoeficientes tipo-cimpa (Accessed: 13 January 2024); https://hdl.handle.net/1992/73581; instname:Universidad de los Andes; reponame:Repositorio Institucional Séneca; repourl:https://repositorio.uniandes.edu.co/

الاتاحة: https://hdl.handle.net/1992/73581

المؤلفون: Guillermo Valencia-Ochoa, Jorge Duarte-Forero, Carlos Acevedo-Peñaloza

المصدر: AiBi Revista de Investigación, Administración e Ingeniería, Vol 8, Iss 1 (2020)

مصطلحات موضوعية: tasa de liberación de calor, motor de generación, gas natural, cámara de combustión, modelizado de valor medio, Engineering (General). Civil engineering (General), TA1-2040

وصف الملف: electronic resource

Relation: https://revistas.udes.edu.co/aibi/article/view/1637; https://doaj.org/toc/2346-030X

URL الوصول: https://doaj.org/article/988a5753aa8b4964afd2408becfb77e2

المؤلفون: fabra rivera, andrea del pilar, RODRIGUEZ JIMENEZ, FRANCYS MARCEL, Bermudez Santaella, Jose Ricardo, Campos Rubio, Juan C.

المصدر: https://www.scielo.br/j/rmat/a/7gzCfJjQ4HGbBPNxFmHKNtQ/?lang=es#.

مصطلحات موضوعية: modelo matemático, relación aire combustible, Simulink®, cámara de combustión, Mathematical model, relation air fuel, combustion chamber, system

وصف الملف: 10 páginas; application/pdf

Relation: Revista Matéria; Vol.25 No.3.(2020); 10; 3(2020); 25; Rivera, A. D. P. F., Jiménez, F. M. R., Santaella, J. R. B., & Rubio, J. C. C. (2020). Modelo matemático de una cámara de combustión de una caldera pirotubular utilizando la herramienta matlab-simulink. Matéria (Rio de Janeiro), 25.; http://repositorio.ufps.edu.co/handle/ufps/1324

الاتاحة: http://repositorio.ufps.edu.co/handle/ufps/1324
https://doi.org/10.1590/S1517-707620200003.1112

المؤلفون: Edilberto Antonio Llanes-Cedeño, Yans Guardia-Puebla, Alain de la Rosa-Andino, Santiago Cevallos-Carvajal, Juan Carlos Rocha-Hoyos

المصدر: Ingenius: Revista de Ciencia y Tecnología, Iss 22 (2019)

مصطلحات موضوعية: fallas, presión, inyección, temperatura, cámara de combustión, mantenimiento, Technology, Science (General), Q1-390

وصف الملف: electronic resource

Relation: https://revistas.ups.edu.ec/index.php/ingenius/article/view/3048; https://doaj.org/toc/1390-650X; https://doaj.org/toc/1390-860X

URL الوصول: https://doaj.org/article/d7e90196c10a433d86e304d123fb3e41

المؤلفون: Llanes-Cedeño, Edilberto Antonio, Guardia-Puebla, Yans, de la Rosa-Andino, Alain, Cevallos-Carvajal, Santiago, Rocha-Hoyos, Juan Carlos

مصطلحات موضوعية: fallas, failure, presión, pressure, inyección, injection, temperatura, temperature, cámara de combustión, combustion chamber, mantenimiento, maintenance, grupos electrógenos, generator sets

وصف الملف: application/pdf

Relation: http://dspace.ups.edu.ec/handle/123456789/17438

الاتاحة: http://dspace.ups.edu.ec/handle/123456789/17438

المؤلفون: Martínez Ruiz, Laura

المساهمون: García-Cuevas González, Luis Miguel, Ciottoli, Pietro Paolo, Universitat Politècnica de València. Departamento de Máquinas y Motores Térmicos - Departament de Màquines i Motors Tèrmics, Universitat Politècnica de València. Escuela Técnica Superior de Ingeniería del Diseño - Escola Tècnica Superior d'Enginyeria del Disseny

مصطلحات موضوعية: Aviación climáticamente neutra, Combustibles sostenibles de aviación, Cámara de combustión con swirl, Mecánica de fluidos computacional, Mecanismo químico, Climate-neutral aviation, Sustainable aviation fuels, Swirl burner, Computational fluid dynamics, Chemical mechanism, INGENIERIA AEROESPACIAL, Máster Universitario en Ingeniería Aeronáutica-Màster Universitari en Enginyeria Aeronàutica

Relation: http://hdl.handle.net/10251/200611

الاتاحة: http://hdl.handle.net/10251/200611

المؤلفون: Kida Delgado, Jorge Celso, Ochoa Medina, Melvin

المساهمون: Canal Cespedes, Abel Franklin

مصطلحات موضوعية: Horno basculante, Diseño del horno, Cámara de combustión, Aleación no ferrosa, http://purl.org/pe-repo/ocde/ford#2.03.01

وصف الملف: application/pdf

Relation: 253T20230236; http://hdl.handle.net/20.500.12918/7554

الاتاحة: https://hdl.handle.net/20.500.12918/7554

المؤلفون: Cisneros Zavaleta, Jesus Eduardo

المساهمون: Mariños Castillo, Gualberto Antenor

المصدر: Repositorio Institucional - UNS

مصطلحات موضوعية: Turbina de gas, Cámara de combustión, Inyección de agua, Rendimiento específico, https://purl.org/pe-repo/ocde/ford#2.02.01

وصف الملف: application/pdf

Relation: https://hdl.handle.net/20.500.14278/4285

الاتاحة: https://hdl.handle.net/20.500.14278/4285

المؤلفون: Pilco Mancheno, Edison Marcelo

المساهمون: Buñay Guamán, Jorge Sebastián, Caicedo Reyes, Jorge Isaías

مصطلحات موضوعية: TECNOLOGÍA Y CIENCIAS DE LA INGENIERÍA, HORNO ECOLÓGICO, CÁMARA DE COMBUSTIÓN, ANÁLISIS TÉRMICO, EMISIÓN DE GASES, MANUAL DE MANTENIMIENTO

وصف الملف: application/pdf

Relation: UDCTFM;15T00877; Pilco Mancheno, Edison Marcelo. (2023). Diseño y construcción de un horno ecológico para el asado de pollos cuya cámara de combustión funcione a gas y carbón. Escuela Superior Politécnica de Chimborazo. Riobamba.; http://dspace.espoch.edu.ec/handle/123456789/20045

الاتاحة: http://dspace.espoch.edu.ec/handle/123456789/20045

المؤلفون: Navarro Domínguez, Modesto

المصدر: RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
instname

مصطلحات موضوعية: Máster Universitario en Ingeniería Aeronáutica-Màster Universitari en Enginyeria Aeronàutica, Quemador, Cámara de combustión, Turbina de gas

وصف الملف: application/pdf

URL الوصول: https://explore.openaire.eu/search/publication?articleId=dedup_wf_001::158cc47948e75ed97aee52aa6a25a1e1
https://hdl.handle.net/10251/181333

المؤلفون: Laiño, Ailén M., Bacci, Guillermo, Schmidt, Nicolás, Pereira, Cecilia, Saenz, Nazarena, Chiarelli, Bianca, Ponzoni, Lucio

المصدر: INNOVA UNTREF. Revista Argentina de Ciencia y Tecnología; Décima Edición ; 2618-1894

مصطلحات موضوعية: Tasa de liberación de calor, cámara de combustión, poder calorífico, carga de fuego

وصف الملف: application/pdf; text/html

Relation: http://revistas.untref.edu.ar/index.php/innova/article/view/1589/1296; http://revistas.untref.edu.ar/index.php/innova/article/view/1589/1297; http://revistas.untref.edu.ar/index.php/innova/article/view/1589

الاتاحة: http://revistas.untref.edu.ar/index.php/innova/article/view/1589

المؤلفون: Cesar Eduardo Mondragón Cediel, Diego Fernando Pachón Hernández, Arnold Escobar Garzón, Rafael Mauricio Cerpa Bernal

المصدر: Ciencia y Poder Aéreo, Vol 5, Iss 1, Pp 27-42 (2010)

مصطلحات موضوعية: turbina de gas de baja potencia (TGBP), generación distribuida, ciclo regenerativo, turbocargador, recuperador, cámara de combustión, CFD, FEA, Motor vehicles. Aeronautics. Astronautics, TL1-4050, Military Science

وصف الملف: electronic resource

Relation: https://www.publicacionesfac.com/index.php/cienciaypoderaereo/article/view/36; https://doaj.org/toc/1909-7050; https://doaj.org/toc/2389-9468

URL الوصول: https://doaj.org/article/804848920b1140ec96bf14a7775d8799

المؤلفون: Giraldo Gaviria, Mateo

المساهمون: Colorado Granda, Andrés Felipe

المصدر: Repositorio UdeA
Universidad de Antioquia
instacron:Universidad de Antioquia

مصطلحات موضوعية: Eficiencia energética, Poli-Hexacore, Manifold, agrovoc:c_1197, Zona de secado, agrovoc:c_16002, Tecnología de mallado “Mosaic”, Óxidos de nitrógeno, Fluent 19.2, Carbonato de calcio, k-ε realizable, Calcium carbonate, Cámara de combustión, Consumo de energía, Nitrogen oxides, Edison disipation

وصف الملف: application/pdf

URL الوصول: https://explore.openaire.eu/search/publication?articleId=od______3056::4733c270cb9927c3b1091cfa7f0d3197

المؤلفون: Carlos Acevedo-Peñaloza, Jorge Duarte-Forero, Guillermo Valencia-Ochoa

المصدر: Repositorio Digital UFPS
UNIVERSIDAD FRANCISCO DE PAULA SANTANDER
instacron:Universidad Francisco de Paula Santander

مصطلحات موضوعية: Work (thermodynamics), 020209 energy, Nuclear engineering, gas natural, Pharmaceutical Science, 02 engineering and technology, 020401 chemical engineering, Natural gas, Approximation error, 0202 electrical engineering, electronic engineering, information engineering, cámara de combustión, Pharmacology (medical), average value modeling, 0204 chemical engineering, Mathematical model, business.industry, combustion chamber, Energy conversion efficiency, Heat release rate, Mode (statistics), motor de generación, natural gas, Electricity generation, tasa de liberación de calor, generation engine, Complementary and alternative medicine, modelizado de valor medio, Environmental science, business

وصف الملف: 07 páginas; application/pdf

URL الوصول: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::02db2637a56fc5fb7ffd3ce33406955d
https://doi.org/10.15649/2346030x.581

المؤلفون: Alzallú Soriano, José Antonio

مصطلحات موضوعية: diesel, culata, inyección directa, tdi, toroidal, cámara de combustión

وصف الملف: application/pdf

Relation: https://publicacionesdidacticas.com/hemeroteca/articulo/066057

الاتاحة: https://publicacionesdidacticas.com/hemeroteca/articulo/066057

المؤلفون: Ortega Pérez, Mario

المصدر: RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
instname

مصطلحات موضوعية: Motor cohete, INGENIERIA AEROESPACIAL, Cámara de combustión, Ingeniero Aeronáutico-Enginyeria Aeronàutica

وصف الملف: application/pdf

URL الوصول: https://explore.openaire.eu/search/publication?articleId=dedup_wf_001::d1acfdf315acdbc69a27d9c85b33ece5
https://hdl.handle.net/10251/168094

المؤلفون: Arce, Alfredo Augusto

مصطلحات موضوعية: Ingeniería Aeronáutica, Evaluación del impacto ambiental, óxido nitroso, cámara de combustión

وصف الملف: application/pdf; 331-336

Relation: http://sedici.unlp.edu.ar/handle/10915/158716

الاتاحة: http://sedici.unlp.edu.ar/handle/10915/158716