-
1Academic Journal
المؤلفون: Kamratowski, Melina, Solf, Mareike, Bergs, Thomas
المصدر: Procedia CIRP 121, 61-66 (2024). doi:10.1016/j.procir.2023.09.230 special issue: "11th CIRP global web conference (CIRPe 2023) / edited by Salil Bapat, Jaydeep Karandikar" ; 11. CIRP Global Web Conference, CIRPe 2023, West Lafayette/IN, USA, 2023-10-24 - 2023-10-26
مصطلحات موضوعية: info:eu-repo/classification/ddc/670, Bevel gears, Effective tool angles, Face Hobbing, Gear, Getriebe, Kegelrad, Manufacturing simulation, Optimierung, Simulation, Tool wear, Verzahnung, Wirkwinkel, Zahnrad, Zahnradauslegung
جغرافية الموضوع: DE
Relation: info:eu-repo/semantics/altIdentifier/issn/2212-8271
-
2Conference
المؤلفون: Popović, Mihajlo, Tanović, Ljubodrag, Mladenović, Goran
المصدر: Proceedings, 35th International Conference on Production Engineering ICPE 2013
مصطلحات موضوعية: tap, cutting tools geometry, tool angles, CAD
Relation: info:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/35022/RS//; https://machinery.mas.bg.ac.rs/handle/123456789/6090; http://machinery.mas.bg.ac.rs/bitstream/id/14982/proceedings1.pdf; https://hdl.handle.net/21.15107/rcub_machinery_6090
-
3Academic Journal
المصدر: Research in Agricultural Engineering, Vol 63, Iss 4, Pp 160-167 (2017)
مصطلحات موضوعية: abbaspour-gilandeh y., khanramaki m. (2013): design, construction and calibration of a triaxial dynamometer for measuring forces and moments applied on tillage implements in field conditions. journal of metrology society of india, 282: 119-127. abo al-kheer a., kharmanda m.g., el hami a., mouazen a.m. (2011): estimating the variability of tillage forces on a chisel plough shank by modeling the variability of tillage system parameters. computers and electronics in agriculture, 781: 61-70. ahmed m.h., godwin r.j. (1983): the influence of wing position on subsoiler penetration and soil disturbance. journal of agricultural engineering research, 281: 489-492. alimardani r., fazel z., akram a., mahmoudi a., varnamkhasti m.g. (2008): design and development of a three-point hitch dynamometer. journal of agricultural technology, 43: 37-52. al-suhaibani a.s., al-jnobi a.a., al-majhadi y.n. (2006): tractors and tillage implements performance. in: proceedings from the canadian society for bio engineering (csbe-scgab) annual conference. paper no. 06-129. july 16-19, 2006. edmonton, alberta. arvidsson j., keller t., gustafsson k. (2004): specific draught for mouldboard plough, chisel plough and disc harrow at different water contents. soil and tillage research, 792: 221-231. asabe standards (2009): asae d497.6, agricultural machinery management data. available at www.asabe.org asae standard (2000): asae d497.4. agricultural machinery management data. st. joseph, asae. askari m., komarizade m.h., nikbakht a.m., nobakht n., teimourlou r.f. (2011): a novel three-point hitch dynamometer to measure the draft requirement of mounted implements. research in agricultural engineering, 574: 128-136. bashford l.l., byerly d.v., grisso r.d. (1991): draft and energy requirements of agricultural implements in semi-arid regions of morocco. agricultural mechanization in asia, africa and latin america, 223: 79-82. buston m.j., rackham d.h. (1981): vibratory soil cutting-ii, and improved mathematical models. journal of agricultural engineering research, 265: 419-439. celik a., raper r.l. (2012): design and evaluation of ground-driven rotary subsoilers. soil and tillage research, 124: 203-210. desbiolles j.m.a., godwin r.j., kilgour j., blackmore b.s. (1997): a novel approach to the prediction of tillage tool draught using a standard tine. journal of agricultural engineering research, 662: 295-309. di prinzio a.p., ayala c.d., magdalena j.c. (1997): energy evaluation of different techniques and subsoiling effects on soil bulk density. agro-science, 131: 61-67. durairaj c.d., balasubramanian m. (1997). influence of tool angles and speed on the soil reactions of a bentleg plough in two soils. soil and tillage research, 442: 137-150. esehaghbeygi a., tabatabaeefar a., raoufat m.h., keyhani a.r. (2002): development and field evaluation of an oblique blade subsoiler and comparison of performance with a conventional l-shape subsoiler. agricultural sciences, 123: 67-81. glancey j.l., upadhyaya s.k., chancellor w.j., rumsey j.w. (1996): prediction of agricultural implement draft using an instrumented analog tillage tool. soil and tillage research, 373: 47-65. godwin r.j., spoor g., leeds-harrison p. (1981): an experimental investigation into the force mechanics and resulting soil disturbance of mole ploughs. journ, Agriculture (General), S1-972
وصف الملف: electronic resource
-
4Academic Journal
المؤلفون: Petrò, Stefano, Moroni, Giovanni
المساهمون: Petrò, Stefano, Moroni, Giovanni
مصطلحات موضوعية: Tool metrology, 3D measurement, Partitioning, Tool angles
وصف الملف: ELETTRONICO
Relation: volume:3; firstpage:151; lastpage:163; numberofpages:13; journal:NANOMANUFACTURING AND METROLOGY; http://hdl.handle.net/11311/1147648; info:eu-repo/semantics/altIdentifier/scopus/2-s2.0-85091844144
-
5Academic Journal
المؤلفون: Maxımov, Jordan, Hrıstov, Hristo
مصطلحات موضوعية: Kesme, Kesme takımları, Hypocycloid yüzeyler, talaşlı işleme yöntemleri, poligon şaft bağlantıları, kesme açıları, Cutting, cutting tools, hypocycloidal surfaces, machining methods, polygon shaft joints, tool angles
Relation: Trakya Üniversitesi Fen Bilimleri Dergisi; Makale - Ulusal Hakemli Dergi - Başka Kurum Yazarı; https://dergipark.org.tr/tr/pub/trakyafbd/issue/22986/245873; https://dergipark.org.tr/tr/download/article-file/213712; http://dspace.trakya.edu.tr/xmlui/handle/trakya/6462; 13; 18
-
6Academic Journal
المؤلفون: Maxımov, Jordan, Hrıstov, Hristo
مصطلحات موضوعية: Kesme, Kesme takımları, Hypocycloid yüzeyler, talaşlı işleme yöntemleri, poligon şaft bağlantıları, kesme açıları, Cutting, cutting tools, hypocycloidal surfaces, machining methods, polygon shaft joints, tool angles
Relation: Trakya Üniversitesi Fen Bilimleri Dergisi; Makale - Ulusal Hakemli Dergi - Başka Kurum Yazarı; https://dergipark.org.tr/tr/pub/trakyafbd/issue/22986/245862; https://dergipark.org.tr/tr/download/article-file/213701; http://dspace.trakya.edu.tr/xmlui/handle/trakya/6533; 11
-
7
المؤلفون: MAXIMOV, Jordan, HRISTOV, Hristo
المصدر: Volume: 6, Issue: 1 13-18
Trakya Üniversitesi Fen Bilimleri Dergisiمصطلحات موضوعية: Cutting,cutting tools,hypocycloidal surfaces,machining methods,polygon shaft joints,tool angles, Kesme,Kesme takımları,Hypocycloid yüzeyler,talaşlı işleme yöntemleri,poligon şaft bağlantıları,kesme açıları
وصف الملف: application/pdf
-
8
المؤلفون: MAXIMOV, Jordan, HRISTOV, Hristo
المصدر: Volume: 6, Issue: 1 1-11
Trakya Üniversitesi Fen Bilimleri Dergisiمصطلحات موضوعية: Cutting,cutting tools,hypocycloidal surfaces,machining methods,polygon shaft joints,tool angles, Kesme,Kesme takımları,Hypocycloid yüzeyler,talaşlı işleme yöntemleri,poligon şaft bağlantıları,kesme açıları
وصف الملف: application/pdf
-
9Academic Journal
المؤلفون: MAXIMOV, Jordan, HRISTOV, Hristo
المصدر: Volume: 6, Issue: 1 1-11 ; 1305-6468 ; Trakya Üniversitesi Fen Bilimleri Dergisi
مصطلحات موضوعية: Kesme,Kesme takımları,Hypocycloid yüzeyler,talaşlı işleme yöntemleri,poligon şaft bağlantıları,kesme açıları, Cutting,cutting tools,hypocycloidal surfaces,machining methods,polygon shaft joints,tool angles.
وصف الملف: application/pdf
-
10Academic Journal
المؤلفون: MAXIMOV, Jordan, HRISTOV, Hristo
المصدر: Volume: 6, Issue: 1 13-18 ; 1305-6468 ; Trakya Üniversitesi Fen Bilimleri Dergisi
مصطلحات موضوعية: Kesme,Kesme takımları,Hypocycloid yüzeyler,talaşlı işleme yöntemleri,poligon şaft bağlantıları,kesme açıları, Cutting,cutting tools,hypocycloidal surfaces,machining methods,polygon shaft joints,tool angles.
وصف الملف: application/pdf
-
11
المؤلفون: Guillaume Fromentin, Gérard Poulachon
المصدر: The International Journal of Advanced Manufacturing Technology. 49:73-80
مصطلحات موضوعية: Engineering, Engineering drawing, Geometric analysis, business.industry, Mechanical Engineering, Cutting geometry, Rake, Mechanical engineering, Thread (computing), Single tooth, Industrial and Manufacturing Engineering, Thread milling, Tool angles, Computer Science Applications, Rake angle, Mécanique: Génie mécanique [Sciences de l'ingénieur], Machining, Control and Systems Engineering, Cutting force model, Mill, business, Computer Science::Operating Systems, Software
وصف الملف: application/pdf
-
12Dissertation/ Thesis
المؤلفون: Szkandera, Pavel
المساهمون: Rusz, Stanislav, Čížek, Lubomír
مصطلحات موضوعية: DRECE (Dual Rolls Equal Channel Extrusion), mez pevnosti, mez kluzu, tažnost, tvrdost, úhel nástroje, vícenásobná plastická deformace, zkoušky mechanických vlastností, tensile strength, yield strength, ductility, hardness, tool angles, severe plastic deformation, tests of mechanical properties
وصف الملف: 3325980 bytes; application/pdf
Relation: OSD002; http://hdl.handle.net/10084/114734; S2723; SZK0016_FS_B2341_2303R002_2016
الاتاحة: http://hdl.handle.net/10084/114734
-
13Academic Journal
المؤلفون: Nagasekhar, AV, Rajkumar, T, Stephan, D, Tick-Hon, Y, Guduru, RK
المساهمون: G Kostorz, M Kato
مصطلحات موضوعية: Gold, ECAP, ECAE, SPD, Mechanical properties, Microstructure, DEFORMATION-BEHAVIOR, GRAIN-REFINEMENT, TOOL-ANGLES, EXTRUSION, STRENGTH, C1, 861203 Metal Castings, 091207 Metals and Alloy Materials
-
14Academic Journal
المؤلفون: Nagasekhar, AV, Yoon, SC, Tick-Hon, Y, Kim, HS
المساهمون: 신소재공학과, 10056225, Kim, HS
مصطلحات موضوعية: Equal channel angular pressing, Equal channel angular extrusion, Severe plastic deformation, Finite element modelling, Strain homogeneity, Peak load, FINE GRAINED MATERIALS, DEFORMATION-BEHAVIOR, PLASTIC-DEFORMATION, BILLET DEFORMATION, ECAE PROCESS, TOOL-ANGLES, EXTRUSION, SIMULATION, FLOW, HOMOGENEITY, 3D, DIE, POWDER
Relation: COMPUTATIONAL MATERIALS SCIENCE; 46; 347; 351; SCI급, SCOPUS 등재논문; SCIE; Materials Science, Multidisciplinary; Materials Science; 2009-OAK-0000019946; https://oasis.postech.ac.kr/handle/2014.oak/27551; 10188; COMPUTATIONAL MATERIALS SCIENCE, v.46, no.2, pp.347 - 351; 000269599200013; 2-s2.0-67651119976
-
15Academic Journal
المؤلفون: Nagasekhar, Anumalasetty V., Wie, Wei, Tick-Hon, Yip, Chen, Guang
المساهمون: J. Ritterbusch
-
16
المؤلفون: Maxımov, Jordan, Hrıstov, Hristo
مصطلحات موضوعية: kesme açıları, machining methods, polygon shaft joints, Cutting, Kesme, talaşlı işleme yöntemleri, tool angles, Hypocycloid yüzeyler, hypocycloidal surfaces, cutting tools, Kesme takımları, poligon şaft bağlantıları
-
17
المؤلفون: Maxımov, Jordan, Hrıstov, Hristo
مصطلحات موضوعية: kesme açıları, machining methods, polygon shaft joints, Cutting, Kesme, talaşlı işleme yöntemleri, tool angles, Hypocycloid yüzeyler, hypocycloidal surfaces, cutting tools, Kesme takımları, poligon şaft bağlantıları
-
18Electronic Resource
المؤلفون: Popović, Mihajlo, Tanović, Ljubodrag, Mladenović, Goran
المصدر: Proceedings, 35th International Conference on Production Engineering ICPE 2013
مصطلحات الفهرس: tap, cutting tools geometry, tool angles, CAD, conferenceObject
URL:
https://machinery.mas.bg.ac.rs/handle/123456789/6090 http://machinery.mas.bg.ac.rs/bitstream/id/14982/proceedings1.pdf https://hdl.handle.net/21.15107/rcub_machinery_6090
info:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/35022/RS
Full Text Finder