يعرض 1 - 6 نتائج من 6 نتيجة بحث عن '"Reforzamiento externo"', وقت الاستعلام: 0.44s تنقيح النتائج
  1. 1
    Dissertation/ Thesis
  2. 2
    Dissertation/ Thesis

    المؤلفون: Neuta Neuta, Ricardo

    المساهمون: Lamus Báez, Fabián Augusto, Carrillo León, Julian, Takeuchi Tam, Caori Patricia, Análisis, Diseño y Materiales Gies

    جغرافية الموضوع: Colombia

    وصف الملف: xvi, 189 páginas; application/pdf

    Relation: 360 en concreto. (2019). Construcción de vivienda informal de Bogotá %7C ARGOS 360. https://www.360enconcreto.com/blog/detalle/categoria/sostenibilidad/viviendainformal-bogota; Abbass, A., Lourenço, P. B., & Oliveira, D. V. (2019). The use of natural fibers in repairing and strengthening of cultural heritage buildings. Materials Today: Proceedings, 31, S321–S328. https://doi.org/10.1016/j.matpr.2020.02.206; Abdulsalam, B., Ali, A. H., Elsafty, A., & Elshafey, N. (2021). Behavior of GFRP strengthening masonry walls using glass fiber composite anchors. Structures, 29, 1352–1357.; Ademović, N., Hadzima-Nyarko, M., & Pavić, G. (2021). Modern Strengthening Methods for URM. Sustainability and Automation in Smart Constructions. Advances in Science, Technology & Innovation. https://link.springer.com/chapter/10.1007/978-3-030-35533-3_43#citeas; AIS, A. C. de I. S. (2023). AIS 410-23: EVALUACIÓN Y REDUCCIÓN DE LA VULNERABILIDAD SÍSMICA EN VIVIENDAS DE MAMPOSTERÍA (p. 100).; Alba, H. R. De, Pichardo, B., Paola, S., & Cruz, A. (2007). Estimación de la vulnerabilidad sísmica de viviendas en zonas urbanas Seismic vulnerability assessment of housing in urban zones. Ingeniería - Revista Académica de La Facultad de Ingeniería Universidad Autónoma de Yucatán, 1, 13–23.; AlShawa, O., Liberatore, D., & Sorrentino, L. (2019). Dynamic One-Sided Out-Of-Plane Behavior of Unreinforced-Masonry Wall Restrained by Elasto-Plastic Tie-Rods. International Journal of Architectural Heritage, 13(3), 340–357. https://doi.org/10.1080/15583058.2018.1563226; Ansell, M. P. (2014). Natural fibre composites in a marine environment. Natural Fibre Composites. https://www.sciencedirect.com/science/article/abs/pii/B9780857095244500141; Ascione, L., Carozzi, F. G., D’Antino, T., & Poggi, C. (2018). New Italian guidelines for design of externally bonded Fabric-Reinforced Cementitious Matrix (FRCM) systems for repair and strengthening of masonry and concrete structures. Procedia Structural Integrity, 11, 202–209. https://doi.org/10.1016/j.prostr.2018.11.027; Avila, L., Vasconcelos, G., & Lourenço, P. B. (2018). Experimental seismic performance assessment of asymmetric masonry buildings. Engineering Structures, 155(July 2017), 298–314. https://doi.org/10.1016/j.engstruct.2017.10.059; Aykac, B., Kalkan, I., Aykal, S., & Bocek, M. (2016). The Out-of-Plane bending behavior of bick infill walls strengthened wit perforated steel plates. Ingeniería, Investigación y Tecnología, XVII(número 4), 429–435.; Babaeidarabad, S., De Caso, F., & Nanni, A. (2014). URM Walls Strengthened with Fabric-Reinforced Cementitious Matrix Composite Subjected to Diagonal Compression. Journal of Composites for Construction, 18(2). https://doi.org/10.1061/(asce)cc.1943-5614.0000441; Barahona, B. (2022). Evaluación de alternativas de reforzamiento externo para mampostería de bloque de perforación horizontal. Universidad Nacional de Colombia.; Basaglia, A., Aprile, A., Spacone, E., & Pilla, F. (2018). Performance-based Seismic Risk Assessment of Urban Systems. International Journal of Architectural Heritage, 12(7–8), 1131–1149. https://doi.org/10.1080/15583058.2018.1503371; Bazán Arbildo, J. E. (2017). Vulnerabilidad sísmica de las viviendas de albañilería confinada en la ciudad de Cajamarca [Pontificia Universidad Catolica del Peru - CENTRUM Catolica (Peru)]. In PQDT - Global. http://ezproxy.unal.edu.co/dissertations-theses/vulnerabilidad-sísmica-de-las-viviendas/docview/2488015559/se-2?accountid=137090; Bedoya R., D. (2005). Firmilian and eucharistic consecration. Journal of Theological Studies, 5(2), 215–220. https://doi.org/10.1093/jts/V.2.215; Biolzi, L., Cattaneo, S., Crespi, P., Scamardo, M., & Vafa, N. (2023). Diagonal compression cyclic testing of unreinforced and reinforced masonry walls. Construction and Building Materials, 363, 14. https://doi.org/10.1016/j.conbuildmat.2022.129839; Bonett D., R., Pujades B., L., & Hurtado G. Jorge. (2003). Vulnerabilidad y riesgo sísmico de edificios. Aplicación a entornos urbanos en zonas de amenaza alta y moderada. In Universidad Politécnica de Catalunya. http://hdl.handle.net/2117/93542; BUILD CHANGE. (2017). Vivienda resiliente: un potenciador de la vida.; CAF Banco de Desarrollo de América Latina, & Ministerio de Urbanismo Viviena y Hábitat Paraguay. (2019). Propuestas para mejorar el hábitat en asentamientos informales. Caso Bañado Norte de Asunción, Paraguay. (Vol. 1).; Caggegi, C., Carozzi, F. G., De Santis, S., Fabbrocino, F., Focacci, F., Hojdys, Ł., Lanoye, E., & Zuccarino, L. (2017). Experimental analysis on tensile and bond properties of PBO and aramid fabric reinforced cementitious matrix for strengthening masonry structures. Composites Part B: Engineering, 127, 175–195. https://doi.org/10.1016/j.compositesb.2017.05.048; Cholostiaków, S., Koutas, L. N., & Papakonstantinou, C. G. (2023). Geopolymer versus cement based textile reinforced mortar: Diagonal compressión tets on masonry wall representative of infills in RC frames. Construction and Building Materials, 373, 13.; Corporación OSSO. (2010). Análisis de manifestaiones dde riesgo en América latina: Patrones y tendencias de las manifestaciones intensivas y extensivas de riesgo. 49.; D’Antino, T., Carloni, C., Sneed, L. H., & Pellegrino, C. (2014). Matrix-fiber bond behavior in PBO FRCM composites: A fracture mechanics approach. Engineering Fracture Mechanics, 117, 94–111. https://doi.org/10.1016/j.engfracmech.2014.01.011; Delgadillo, E., Nieto, X., Takeuchi, C. P., & Naspud, P. (2023). COMPRESIÓN DIAGONAL EN MAMPOSTERÍA CON BLOQUES NO ESTRUCTURALES REFORZADOS CON MALLA ELECTROSOLDADA Y FIBRAS METÁLICAS DIAGONAL COMPRESSION IN MASONRY WITH NON-STRUCTURAL BLOC . DIAGONAL COMPRESSION IN MASONRY WITH NON-STRUCTURAL BLOCK. April.; Donnini, J., & Corinaldesi, V. (2017). Mechanical characterization of different FRCM systems for structural reinforcement. Construction and Building Materials, 145, 565–575. https://doi.org/10.1016/j.conbuildmat.2017.04.051; Du, Y., Yan, N., & Kortschot, M. T. (2014). The use of ramie fibers as reinforcements in composites. Biofiber Reinforcements in Composite Materials. https://www.sciencedirect.com/science/article/abs/pii/B9781782421221500046?via%3Dihub; Escallón, C., & Rodríguez, D. (2010). Las preguntas por la calidad de la vivienda: ¿quién las hace?, ¿quién las responde? Who Asks the Questions about Housing Quality? Who Answers Them?, 6, 6–19. http://search.ebscohost.com/login.aspx?direct=true&db=vth&AN=57735136&lang=es&site=ehost-live; Ferrara, G., Caggegi, C., Martinelli, E., & Gabor, A. (2020). Shear capacity of masonry walls externally strengthened using Flax-TRM composite systems: experimental tests and comparative assessment. Construction and Building Materials, 261, 120490. https://doi.org/10.1016/j.conbuildmat.2020.120490; Guerrero T., A. (2020). Imaginario colectivo popular del construir vivienda informal en la ciudad de Bogotá. Arkitekturax Visión FUA, 2(2), 35–51. https://doi.org/10.29097/26191709.260; Hábitat III, C. de las N. U. sobre V. y D. U. S. (2015). Temas Hábitat III: Asentamientos Informales. In Naciones Unidas. http://habitat3.org/wp-content/uploads/Issue-Paper-22_ASENTAMIENTOS-INFORMALES-SP.pdf; Hernández C., N. L. (2006). La sostenibilidad en el desarrollo de la vivienda informal. Análisis a partir del estudio del hábitat del barrio puerta al llano. Tabula Rasa, 4, 287–303. https://doi.org/10.25058/20112742.257; Instituto Distrital de Gestión de Riesgos y Cambio Climático IDIGER. (2018). Modelación del riesgo sísmico en edificaciones para la ciudad de Bogotá version 2018 SISMARB.; Jing, D., Krevaikas, T., & Zhang, H. (2021). Pre-stressed steel strips for the strengthening of axially loaded masonry walls. Structures, 30, 25–29.; Kumar, S., Manna, A., & Dang, R. (2021). A review on applications of natural Fiber-Reinforced composites (NFRCs). Materials Today: Proceedings, 50, 1632–1636. https://doi.org/10.1016/j.matpr.2021.09.131; Legis, C. E. (2021). Mampostería estructural en Colombia bajo la NSR10. LEGIS. https://blog.legis.com.co/construccion/mamposteria-estructural-colombia; Llerena Encalada, A. (2014). Estudio de compuestos cementíceos reforzados con fibras vegetales: Evaluación previa del comportamiento de un panel de cemento blanco con adición de meta-caolín reforzado con un textil no-tejido de fibras largas de lino y cáñamo. http://hdl.handle.net/2099.1/25365; López B., W. (2016). Arquitectura y Urbanismo La informalidad urbana y los procesos de mejoramiento barrial. Arquitectura y Urbanismo, XXXVII(3), 1–18.; López B., W. (2018). Diversidad informal urbana , intervenciones particulares para asentamientos específicos . Bitacora 28 Universidad Nacional de Colombia, 28(2), 135–142. http://www.scielo.org.co/pdf/biut/v28n2/0124-7913-biut-28-02-135.pdf; López, S., Quiroga, P., & Torres, N. (2012). EVALUATION OF UNREINFORCED MASONRY WALLS COVERED WITH REINFORCED MORTARS. XXXV Jornadas Sul Americanas de Engenharia Estrutural. Rio de Janeiro; Maldonado R., E., Gómez A., I., & Chio Cho, G. (2008). Funciones de vulnerabilidad y matrices de probabilidad de daño sísmico para edificaciones de mampostería utilizando técnicas de simulación. Dyna, 75(155), 63–76.; Maldonado R, E., Gómez A, I., & Chio Cho, G. (2007). Aplicación de los conjuntos difusos en la evaluación de los parámetros de la vulnerabilidad sísmica de edificaciones de mampostería. Revista Científica Ingeniería y Desarrollo, 22(22).; Marin, A., & Laverde, V. (2020). Uso de Fibras Vegetales como Reforzamiento Estructural en Materiales Compuestos de Matriz Cementosa: Estado del Arte. Universidad Industrial de Santander Facultades.; Martín S., A. (2020). Estudio Comparativo De Fibras Naturales Para Reforzar El Hormigon.; Mejía S., M. L., Cuesta C., D. P., Nela G., M. N., Escobar M., J., Upegui G., B. J., Palacio H., L. M., Giraldo Z., J., Trujillo O., I. C., & Botero P., L. E. (2019). Protocolos para caracterización de no tejidos conformados por nanofibras. In Protocolos para caracterización de no tejidos conformados por nanofibras. https://doi.org/10.18566/978-958-764-753-2; Mena S., M., & Valbuena P., S. G. (2011). Caracterización Del Sistema Constructivo Y Aspectos Generales De La Construcción De Las Viviendas Populares En Sectores Vulnerables De La Ciudad De Bogotá D.C. 93.; Menna, C., Asprone, D., Durante, M., Zino, A., Bálsamo, A., & Prota, A. (2015). Structural behaviour of masonry panels strengthened with an innovative hemp fiber composite grid. Construction and Building Materials, 100, 111–121.; Mercedes, L., Bernart, E., & Gil, L. (2020). Flexural failure of fabric reinforced cementitious mortar (FRCM) plates under punctual loads: Experimental test, analytical approach and numerical simulation. Construction and Building Materials, 272, 13.; Mercedes, L., Bernat-Maso, E., & Gil, L. (2020). In-plane cyclic loading of masonry walls strengthened by vegetal-fabric-reinforced cementitious matrix (FRCM) composites. Engineering Structures, 221, 13. https://doi.org/10.1016/j.engstruct.2020.111097; Ministerio de Vivienda, A. (2010). NSR 10 Título D - Mampostería Estructural. In AIS, Asociación Colombiana de Ingeniería Sísmica. Ministerio Ambiente Vivienda y Desarrollo Territorial (p. 84).; Mosqueira M., M. A., & Tarque R., S. N. (2011). Recomendaciones Técnicas para Mejorar la Seguridad Sísmica de Viviendas de Albañilería Confinada de la Costa Peruana [Pontificia Universidad Catolica del Peru - CENTRUM Catolica (Peru)]. In PQDT - Global. http://ezproxy.unal.edu.co/dissertations-theses/recomendaciones-técnicas-para-mejorar-la/docview/2430713656/se-2?accountid=137090; ONU CEPAL, C. E. para A. L. y el C. (2018). La Agenda 2030 y sus Objetivos de Desarrollo Sostenible: Una oportunidad para America Latina y el CAribe. In Revista de Derecho Ambiental (Issue 10, p. 93). https://doi.org/10.5354/0719-4633.2018.52077; Páez, D., Parra, S., & Montaña, C. (2009). Alternativa estructural de refuerzo horizontal en muros de mampostería. Revista Ingenierías Universidad de Medellín, 8(14), 51–69. http://www.scielo.org.co/scielo.php?script=sci_arttext&pid=S1692-33242009000100005&lng=en&nrm=iso&tlng=es; Preciado, A., Rodrìguez, Ó., Gutierrez, N., & Leal Rubio, O. (2016). Ingeniería Estructural Sensibilizada Ante Riesgos Naturales Aplicada a la 1er Congreso Internacional sobre Sustentabilidad en los Hábitats. September 2017, 0–21.; Quinde, J., Jiménez-Pacheco, J., & Ortega-Guamán, E. (2023). Revisión de normas de diseño para mampostería confinada en Latinoamérica: propuestas para la Norma Ecuatoriana de Construcción. Revista Politécnica, 51(1), 77–92. https://doi.org/10.33333/rp.vol51n1.07; Rueda, D., González, D., Acevedo, A. B., Duque, J. C., & Ramos-Pollán, R. (2020). Use of deep learning models in street-level images to classify one-story unreinforced masonry buildings based on roof diaphragms. Building and Environment, 189. https://doi.org/10.1016/j.buildenv.2020.107517; Sandoval, O. J., Takeuchi, C., Carrillo, J., & Barahona, B. (2021). Performance of unreinforced masonry panels strengthened with mortar overlays reinforced with welded wire mesh and transverse connectors. Construction and Building Materials, 267. https://doi.org/10.1016/j.conbuildmat.2020.121054; Syiemiong, H., & Marthong, C. (2021). The effect of mortar grade on the out-of-plane behaviour of low-strength masonry wall strengthened with welded wire mesh. Construction and Building Materials, 279, 122393. https://doi.org/10.1016/j.conbuildmat.2021.122393; Torres P., C., & Arias H., J. (2018). Identificación de malas prácticas constructivas en la vivienda informal. Propuesta educativa. Tecnura, 23(59), 47–59.; UNGRD, U. N. para la G. del R. de D. (2021). Guía para la construcción de viviendas sismo resistentes de mampostería confinada de uno y dos pisos en Colombia.; Valencia, F. R. (2015). Fabricación y caracterización físico-mecánica de biocomposites reforzados con fibras naturales. Aplicaciones en el sector náutico. 2015(c), 194. https://addi.ehu.es/handle/10810/18822#?; Wu, G., Ji, C., Wang, X., Gao, F., Zhao, C., Liu, Y., & Yang, G. (2021). Blast response of clay brick masonry unit walls unreinforced and reinforced with polyurea elastomer. Defence Technology, xxxx. https://doi.org/10.1016/j.dt.2021.03.004; Zuloaga, D., Salgado, M., Cardona, O., & Yamin, L. (2013). Riesgo Sísmico De Bogotá Como Resultado De Una Nueva Interpretación Sismo-. May 2016, 17.; https://repositorio.unal.edu.co/handle/unal/86638; Universidad Nacional de Colombia; Repositorio Institucional Universidad Nacional de Colombia; https://repositorio.unal.edu.co/

  3. 3
  4. 4
    Dissertation/ Thesis

    المؤلفون: Barahona Linares, Bryan

    المساهمون: Takeuchi, Caori Patricia, Análisis, Diseño y Materiales Gies

    وصف الملف: 164 páginas; application/pdf

    Relation: Abramo, P. (2012). La ciudad comfusa: Mercado y producción de la estructura urbana en las grandes metrópolis latinoamericanas. Eure, 38(114), 35–69. https://doi.org/10.4067/S0250-71612012000200002; Acero, W., Muñoz, S., & Melo, L. E. (2016). Rehabilitación de mampostería no estructural para muros divisorios con listones de guadua. Consultado en www.iranesrd.com; ACI Committe. (2014). ACI 318S-14.; AIS. (2010). Reglamento Colombiano de Construcción Sismo Resistente NSR-10 - Título D.; ASTM. (2021). Standard Test Method for Compressive Strength of Masonry Prisms, C1314. American Society for Testing and Materials, 1–9.; ASTM. (2021). Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages. E 519 – 02, United States. Astm, 1–5.; BEKAERT. Ficha Técnica Dramix 3D 35 mm, (2012).; Benedetti, A. (2019). In Plane Behaviour of Masonry Walls Reinforced with Mortar Coatings and Fibre Meshes. International Journal of Architectural Heritage, 13(7), 1029–1041. https://doi.org/10.1080/15583058.2019.1618972; Bigger, R. P., Carpenter, A., Scott, N., Dannemann, K., Chocron, S., & Williams, C. (2018). Dynamic Response of Aluminum 5083 During Taylor Impact Using Digital Image Correlation. Experimental Mechanics, 58(6), 951–961. https://doi.org/10.1007/s11340-018-0392-5; Borri, A., Corradi, M., Castori, G., & Molinari, A. (2019). Stainless steel strip – A proposed shear reinforcement for masonry wall panels. Construction and Building Materials, 211, 594–604. https://doi.org/10.1016/j.conbuildmat.2019.03.197; Bruneau, M. (1994). State of the art Report On Seismic Performance of Unreinforced Masonry Buildings. Natural Sciences and Engineering Research Council of Canada, 120(1), 230–251; Carrillo, Julian, Alcocer, S. M., & Pincheira, J. A. (2012). Seismic rehabilitation of lightly-reinforced, low-rise walls with SFRC overlays. American Concrete Institute, ACI Special Publication, (SP 296), 163–178; Carrillo, Julián, Aperador, W., & González, G. (2013). Correlaciones entre las propiedades mecánicas del concreto reforzado con fibras de acero. Ingeniería. Investigación y Tecnología, (número 3), 435–450. Consultado en http://www.redalyc.org/articulo.oa?id=40428278013; Carrillo, Julian, Pincheira, J. A., & Alcocer, S. M. (2017). Behavior of low-rise, steel fiber-reinforced concrete thin walls under shake table excitations. Engineering Structures, 138, 146–158. https://doi.org/10.1016/j.engstruct.2017.02.017; Chuang, S. W., & Zhuge, Y. (2005). Seismic Retrofitting of Unreinforced Masonry Buildings – A Literature Review. Australian Journal of Structural Engineering, 6(1), 25–36. https://doi.org/10.1080/13287982.2005.11464942; Cruz O., A. I., Pérez-Gavilán E., J. J., & Flores C., L. (2019). Experimental study of in-plane shear strength of confined concrete masonry walls with joint reinforcement. Engineering Structures, 182(June 2018), 213–226. https://doi.org/10.1016/j.engstruct.2018.12.040; DANE. (2018). Censo Nacional de Población y Vivienda - CNPV 2018. Consultado en http://systema59.dane.gov.co/bincol/RpWebEngine.exe/Portal?BASE=CNPVBASE4V2&lang=esp; Dizhur, D., & Ingham, J. M. (2013). Diagonal tension strength of vintage unreinforced clay brick masonry wall panels. Construction and Building Materials, 43, 418–427. https://doi.org/10.1016/j.conbuildmat.2013.02.015; Fayala, I., Limam, O., & Stefanou, I. (2016). Experimental and numerical analysis of reinforced stone block masonry beams using GFRP reinforcement. Composite Structures, 152, 994–1006. https://doi.org/10.1016/j.compstruct.2016.06.046; Gallo Arciniegas, L. P., González Peñuela, G., & Carrillo León, J. (2013). Comportamiento del concreto reforzado con fibras de acero ZP-306 sometido a esfuerzos de compresión. Ciencia e Ingeniería Neogranadina, 23(1), 117. https://doi.org/10.18359/rcin.236; Gamba, C. (2019). Reforzamiento por una Cara de Muros de Mampostería de Arcilla con Unidades de p Perforación Horizontal. 87. Consultado en https://repositorio.unal.edu.co/bitstream/handle/unal/77673/1049631625.2020.pdf?sequence=1&isAllowed=y; Gattesco, N., & Boem, I. (2015). Experimental and analytical study to evaluate the effectiveness of an in-plane reinforcement for masonry walls using GFRP meshes. Construction and Building Materials, 88, 94–104. https://doi.org/10.1016/j.conbuildmat.2015.04.014; Górszczyk, J., Malicki, K., & Zych, T. (2019). Application of digital image correlation (DIC) method for road material testing. Materials, 12(15). https://doi.org/10.3390/ma12152349; Guo, Y., Chen, X., Yang, H., Hu, L., Zhang, J., & Fan, X. (2019). Experimental study on direct tension behavior of concrete through combined digital image correlation and acoustic emission techniques. Structural Concrete, 20(6), 2042–2055. https://doi.org/10.1002/suco.201800354; Huang, Z., Tu, Y., Meng, S., Sabau, C., Popescu, C., & Sas, G. (2019). Experimental study on shear deformation of reinforced concrete beams using digital image correlation. Engineering Structures, 181(November 2018), 670–698. https://doi.org/10.1016/j.engstruct.2018.12.056; Ibáñez Londoño, A. M., & Moya, A. (2007). La población desplazada en Colombia : examen de sus condiciones socioeconómica y análisis de las políticas actuales (Departamento Nacional de Planeación, ed.). Bogotá D.C.: Gobierno de Colombia.; Inostroza, L., & Tábbita, J. H. (2016). Informal Urban Development in the Greater Buenos Aires Area: A Quantitative-Spatial Assessment Based on Households’ Physical Features Using GIS and Principal Component Analysis. Procedia Engineering, 161(0), 2138–2146. https://doi.org/10.1016/j.proeng.2016.08.806; Instituto Colombiano de Normas Tecnicas. (2001). Norma Técnica Colombiana NTC 4925: Método de ensayo para determinar la resistencia a la tracción diagonal (cortante) en muretes de mampostería. 12; Instituto Colombiano de Normas Tecnicas. (2003). Norma Técnica Colombiana NTC 3495: Método de ensayo para determinar la resistencia a la compresión de muretes de mampostería. 16.; Kadam, S. B., Singh, Y., & Li, B. (2014). Strengthening of unreinforced masonry using welded wire mesh and micro-concrete - Behaviour under in-plane action. Construction and Building Materials, 54, 247–257. https://doi.org/10.1016/j.conbuildmat.2013.12.033; Kamrava, A. R., Najafgholipour, M. A., Fathi, F., & Dehghan, S. M. (2021). An experimental study on the in-plane behavior of unreinforced masonry walls with an opening strengthened using steel fiber reinforced concrete overlays. Journal of Building Engineering, 36(December 2020), 102084. https://doi.org/10.1016/j.jobe.2020.102084; Kubica, J., & Nebojša, M. (2012). Reinforced Masonry in Europe – State of the Art : Masonry Under Compression and Shear. 15th International Brick and Block Masonry Conference; Ladrillera Santafé. (2017). Ficha Técnica - Bloque # 5. (74), 8–9. Consultado en http://santafe.com.co/images/fichas/FT_BL5.pdf; Lakavath, C., Joshi, S. S., & Prakash, S. S. (2019). Investigation of the effect of steel fibers on the shear crack-opening and crack-slip behavior of prestressed concrete beams using digital image correlation. Engineering Structures, 193(April), 28–42. https://doi.org/10.1016/j.engstruct.2019.05.030; López S., Quiroga P., T. N. (2012). Evaluation of unreinforced masonry walls covered with reinforced mortars, Sebastián López ( A ); Pedro N . Quiroga; Nancy Torres ( A ) En Colombia y en diferentes países de América Latina existe una gran cantidad de edificaciones construidas en muros de mampostería. XXXV Jornadas Sul Americanas de Engenharia Estrutural. Rio de Janeiro; Menna, C., Asprone, D., Durante, M., Zinno, A., Balsamo, A., & Prota, A. (2015). Structural behaviour of masonry panels strengthened with an innovative hemp fibre composite grid. Construction and Building Materials, 100, 111–121. https://doi.org/10.1016/j.conbuildmat.2015.09.051; Molano, M. A., & Serrano, A. (2015). Rehabilitación sísmica de mampostería no estructural mediante listones de madera. Pontificia Universidad Javeriana, 1, 1–171; Moroz, J. G., Lissel, S. L., & Hagel, M. D. (2014). Performance of bamboo reinforced concrete masonry shear walls. Construction and Building Materials, 61(2014), 125–137. https://doi.org/10.1016/j.conbuildmat.2014.02.006; Órgano de Difusión del Gobierno de la Ciudad de México. (2017). Jefatura de Gobierno Decreto por el que se derogan dos Normas de Ordenación sobre Vialidad , contenidas en el Programa Delegacional de Desarrollo Urbano en Álvaro Obregón Secretaría de Desarrollo Urbano y Vivienda y Secretaría de Obras y Servicios Sismo d. Gaceta Oficial de La Ciudad de México, (211); Oskouei, A. V., Jafari, A., Bazli, M., & Ghahri, R. (2018). Effect of different retrofitting techniques on in-plane behavior of masonry wallettes. Construction and Building Materials, 169, 578–590. https://doi.org/10.1016/j.conbuildmat.2018.02.197; Rezaie, A., Achanta, R., Godio, M., & Beyer, K. (2020). Comparison of crack segmentation using digital image correlation measurements and deep learning. Construction and Building Materials, 261, 120474. https://doi.org/10.1016/j.conbuildmat.2020.120474; Saaty, R. W. (1987). The analytic hierarchy process-what it is and how it is used. Mathematical Modelling, 9(3–5), 161–176. https://doi.org/10.1016/0270-0255(87)90473-8; Sandoval, O. J., Takeuchi, C., Carrillo, J., & Barahona, B. (2021). Performance of unreinforced masonry panels strengthened with mortar overlays reinforced with welded wire mesh and transverse connectors. Construction and Building Materials, 267, 121054. https://doi.org/10.1016/j.conbuildmat.2020.121054; Sathiparan, N. (2015). Mesh type seismic retrofitting for masonry structures: Critical issues and possible strategies. European Journal of Environmental and Civil Engineering, 19(9), 1136–1154. https://doi.org/10.1080/19648189.2015.1005160; Seo, S. Y., & Jeon, S. M. (2017). Evaluation of prism and diagonal tension strength of masonry form-block walls reinforced with steel fibers. Construction and Building Materials, 152, 394–405. https://doi.org/10.1016/j.conbuildmat.2017.06.168; Simoncello, N., Zampieri, P., Gonzalez-Libreros, J., & Pellegrino, C. (2019). Experimental behaviour of damaged masonry arches strengthened with steel fiber reinforced mortar (SFRM). Composites Part B: Engineering, 177(August). https://doi.org/10.1016/j.compositesb.2019.107386; Takeuchi, C. (2010). Comportamiento en la mampostería estructural. Bogotá D.C.: Universidad Nacional de Colombia.; Takeuchi, C. (2013). Diseño de vigas y muros en mampostería reforzada. (Editorial Universidad Nacional de Colombia, ed.). Bogotá D.C.: Universidad Nacional de Colombia.; UNGRD. (2015). Guía de Integración de la Gestión del Riesgo y el Ordenamiento Territorial Municipal. 107. Consultado en www.gestiondelriesgo.gov.co; Wilding, B. V., Dolatshahi, K. M., & Beyer, K. (2017). Influence of load history on the force-displacement response of in-plane loaded unreinforced masonry walls. Engineering Structures, 152, 671–682. https://doi.org/10.1016/j.engstruct.2017.09.038; https://repositorio.unal.edu.co/handle/unal/81492; Universidad Nacional de Colombia; Repositorio Institucional Universidad Nacional de Colombia; https://repositorio.unal.edu.co/

  5. 5
    Dissertation/ Thesis
  6. 6
    Dissertation/ Thesis