المؤلفون: Nishant Ojal, Ryan Copenhaver, Harish P. Cherukuri, Tony L. Schmitz, Kyle T. Devlugt, Adam W. Jaycox

المصدر: Journal of Manufacturing and Materials Processing; Volume 6; Issue 2; Pages: 33

مصطلحات موضوعية: three-dimensional machining, orthogonal machining, Johnson–Cook constitutive model, smoothed particle hydrodynamics, finite element analysis

وصف الملف: application/pdf

Relation: https://dx.doi.org/10.3390/jmmp6020033

الاتاحة: https://doi.org/10.3390/jmmp6020033

المؤلفون: Farshid Jafarian

المصدر: مجله مدل سازی در مهندسی, Vol 17, Iss 57, Pp 315-325 (2019)

مصطلحات موضوعية: material model, finite element simulation, orthogonal machining, johnson-cook, Engineering design, TA174

وصف الملف: electronic resource

Relation: https://modelling.semnan.ac.ir/article_3931_8bac540a6ccebd854c75ec034343f57c.pdf; https://doaj.org/toc/2008-4854; https://doaj.org/toc/2783-2538

URL الوصول: https://doaj.org/article/29bf9e9154404690ad37d593d9bbbec2

المؤلفون: Pandey, Aditya, Madhavan, Viswanathan, Moscoso-Kingsley, Wilfredo

المصدر: 966 ; 971 ; Journal of Manufacturing Processes ; 124

مصطلحات موضوعية: Dynamic tool stress, High speed photoelasticity, Orthogonal machining, Shear banding

Relation: Pandey, A., Madhavan, V., Moscoso-Kingsley, W. Photoelastic measurement of tool stress distribution when machining AA-7075-T6 under dynamic conditions produced by shear banding. (2024). Journal of Manufacturing Processes, 124, pp. 966-971. DOI:10.1016/j.jmapro.2024.05.079; https://hdl.handle.net/10057/27999

الاتاحة: https://hdl.handle.net/10057/27999
https://doi.org/10.1016/j.jmapro.2024.05.079

المؤلفون: Yaich, Mariem, Ayed, Yessine, Germain, Guénaël, Bouaziz, Zoubeir

المساهمون: Laboratoire Angevin de Mécanique, Procédés et InnovAtion (LAMPA), Arts et Métiers Sciences et Technologies, HESAM Université - Communauté d'universités et d'établissements Hautes écoles Sorbonne Arts et métiers université (HESAM)-HESAM Université - Communauté d'universités et d'établissements Hautes écoles Sorbonne Arts et métiers université (HESAM), École Nationale d'Ingénieurs de Sfax

المصدر: ISSN: 0268-3768.

مصطلحات موضوعية: Ti6Al4V, VUMAT, Constitutive model, Chip segmentation, Orthogonal machining, [SPI.MECA.MEMA]Engineering Sciences [physics]/Mechanics [physics.med-ph]/Mechanics of materials [physics.class-ph], [SPI.MECA.GEME]Engineering Sciences [physics]/Mechanics [physics.med-ph]/Mechanical engineering [physics.class-ph]

الاتاحة: https://hal.science/hal-03476637
https://hal.science/hal-03476637v1/document
https://hal.science/hal-03476637v1/file/LAMPA_IJAMT_2021_YAICH.pdf
https://doi.org/10.1007/s00170-021-07753-5

المؤلفون: Roy Y. Allwin, Gobivel K., Sekar K.S. Vijay, Kumar S. Suresh

المصدر: Archives of Metallurgy and Materials, Vol 62, Iss 3, Pp 1771-1777 (2017)

مصطلحات موضوعية: Composite materials, orthogonal machining, cutting forces, chip microstructure, Mining engineering. Metallurgy, TN1-997, Materials of engineering and construction. Mechanics of materials, TA401-492

وصف الملف: electronic resource

Relation: http://www.degruyter.com/view/j/amm.2017.62.issue-3/amm-2017-0269/amm-2017-0269.xml?format=INT; https://doaj.org/toc/2300-1909

URL الوصول: https://doaj.org/article/1ae61f24e88349408baa48bbcb712f92

المؤلفون: Orestis Friderikos, Dimitrios Sagris, Constantine N. David, Apostolos Korlos

المصدر: Metals; Volume 10; Issue 3; Pages: 338

مصطلحات موضوعية: catastrophic thermoplastic slip, adiabatic shear bands, rigid viscoplastic FEM, ductile damage, orthogonal machining

وصف الملف: application/pdf

Relation: Metal Casting, Forming and Heat Treatment; https://dx.doi.org/10.3390/met10030338

الاتاحة: https://doi.org/10.3390/met10030338

المؤلفون: Criado, V., Feito-Sánchez, Norberto, Cantero Guisández, J.L., Díaz-Álvarez, J.

المساهمون: Universitat Politècnica de València. Departamento de Ingeniería Mecánica y de Materiales - Departament d'Enginyeria Mecànica i de Materials, Agencia Estatal de Investigación

مصطلحات موضوعية: Orthogonal machining, CFRP, Linear cutting movement, High cutting speed, Experimental method, INGENIERIA DE LOS PROCESOS DE FABRICACION

Relation: Materials; info:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016/DPI2017-89197-C2-1-R/ES/TALADRADO DE COMPONENTES HIBRIDOS CFRPS%2FTI Y TOLERANCIA AL DAÑO DEBIDO A MECANIZADO DURANTE EL COMPORTAMIENTO EN SERVICIO DE UNIONES ESTRUCTURALES AERONAUTICAS/; https://doi.org/10.3390/ma12244074; http://hdl.handle.net/10251/145557; urn:eissn:1996-1944; PMC6947458

الاتاحة: http://hdl.handle.net/10251/145557
https://doi.org/10.3390/ma12244074

المؤلفون: Zhao, ZJ, To, S, Zhuang, ZX

المساهمون: Department of Building Services Engineering

مصطلحات موضوعية: Cutting and thrust forces, Martensite, Micro orthogonal machining, Serrated chips, Ti6Al4V alloy

Relation: http://hdl.handle.net/10397/80903; 10; 197; OA_IR/PIRA

الاتاحة: http://hdl.handle.net/10397/80903
https://doi.org/10.3390/mi10030197

المؤلفون: Aydın, Mehmet, Köklü, Uğur

المساهمون: Köklü, Uğur

مصطلحات موضوعية: Ball-End Milling Forces, Cutting Conditions, FE Modeling, Orthogonal Machining, Mühendislik, Ortak Disiplinler

وصف الملف: application/pdf

Relation: Journal of the Faculty of Engineering and Architecture of Gazi University; Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı; Aydın, M., Köklü, U. (2018). A study of ball-end milling forces by finite element model with Lagrangian boundary of orthogonal cutting operation. Journal of the Faculty of Engineering and Architecture of Gazi University, 33, 2, 503-515.; https://dx.doi.org/10.17341/gazimmfd.416360; https://hdl.handle.net/11492/2703; http://www.trdizin.gov.tr/publication/paper/detail/TWpnNE5EY3dNQT09; 33; 527; 517

الاتاحة: https://hdl.handle.net/11492/2703
https://doi.org/10.17341/gazimmfd.416360
http://www.trdizin.gov.tr/publication/paper/detail/TWpnNE5EY3dNQT09

المؤلفون: Vijay Sekar, K. S., Pradeep Kumar, M.

المصدر: Journal of the Brazilian Society of Mechanical Sciences and Engineering. June 2011 33(2)

مصطلحات موضوعية: titanium alloys, material constitutive models, orthogonal machining process, finite element simulation

وصف الملف: text/html

URL الوصول: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1678-58782011000200012

المؤلفون: Maan Tawfiq, Suha Shahab

المصدر: Engineering and Technology Journal, Vol 25, Iss 4, Pp 569-583 (2007)

مصطلحات موضوعية: fem, edge radius, orthogonal machining, Science, Technology

وصف الملف: electronic resource

Relation: https://etj.uotechnology.edu.iq/article_181339_453bf8064bb2df16ad01223c7252b3d0.pdf; https://doaj.org/toc/1681-6900; https://doaj.org/toc/2412-0758

URL الوصول: https://doaj.org/article/3f0fb8fb0c7a4835b06e2c43a7540b68

المساهمون: Uludağ Üniversitesi/Teknik Bilimler Meslek Yüksekokulu., Uludağ Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü., Kuş, Abdil, Işık, Yahya, Çakır, Cemal M., Coşkun, Salih, Özdemir, Kadir, AAG-9412-2021, 57196667786, 8981150600, 56486126300, 26644674500, 56485368500

مصطلحات موضوعية: Cutting speed, Machining, Pyrometer, Thermocouple, Tool temperature, Chemistry, Engineering, Instruments & instrumentation, Alloy steel, Carbides, Cutting, Cutting tools, Electromagnetic wave emission, Finite element method, Infrared detectors, Infrared radiation, Machining centers, Pyrometers, Pyrometry, Temperature measurement, Thermoanalysis, Thermocouples, Turning, ANSYS finite element method, Effective parameters, K-type thermocouples, Measurement of temperature, Orthogonal machining, Tool temperatures, Tool-chip interface temperatures

وصف الملف: application/pdf

Relation: Makale - Uluslararası Hakemli Dergi; 2013/20; Sensors (Switzerland); Kuş, A. vd. (2015). "Thermocouple and infrared sensor-based measurement of temperature distribution in metal cutting". Sensors (Switzerland), 15(1), 1274-1291.; https://doi.org/10.3390/s150101274; https://www.mdpi.com/1424-8220/15/1/1274; http://hdl.handle.net/11452/26761; 000348309400072; 2-s2.0-84921294846; 1274; 1291; 15

الاتاحة: http://hdl.handle.net/11452/26761
https://doi.org/10.3390/s150101274
https://www.mdpi.com/1424-8220/15/1/1274

المؤلفون: PR Paresi, A Narayanan, Y Lou, Jeong Yoon

مصطلحات موضوعية: Manufacturing engineering not elsewhere classified, Mechanical engineering not elsewhere classified, fracture criterion, orthogonal machining, numerical simulations, AA 2024-T351, chip morphology, damage evolution method, machining processes, modeling and simulation, 4014 Manufacturing engineering, 4016 Materials engineering

Relation: http://hdl.handle.net/10536/DRO/DU:30166835

الاتاحة: http://hdl.handle.net/10536/DRO/DU:30166835
https://figshare.com/articles/journal_contribution/Finite_Element_Modeling_for_Orthogonal_Machining_of_AA2024-T351_Alloy_With_an_Advanced_Fracture_Criterion/20607492

المؤلفون: Ojolo S. Joshua, Ismail S. Oluwarotimi, Yusuf O. Tolu

المصدر: International Journal of Engineering and Technology Innovation, Vol 3, Iss 4 (2013)

مصطلحات موضوعية: temperature, machining variables, orthogonal machining, Technology, Engineering (General). Civil engineering (General), TA1-2040

Relation: http://ojs.imeti.org/index.php/IJETI/article/view/115; https://doaj.org/toc/2223-5329; https://doaj.org/toc/2226-809X; https://doaj.org/article/df7e376e7e8f42a6844f0838af073112

الاتاحة: https://doaj.org/article/df7e376e7e8f42a6844f0838af073112

المؤلفون: Dimitrios Sagris, Constantine David, Apostolos Korlos, Orestis Friderikos

المصدر: Metals, Vol 10, Iss 3, p 338 (2020)
Metals
Volume 10
Issue 3

مصطلحات موضوعية: Coalescence (physics), lcsh:TN1-997, 0209 industrial biotechnology, Materials science, Viscoplasticity, Chip formation, Metals and Alloys, rigid viscoplastic fem, adiabatic shear bands, 02 engineering and technology, Slip (materials science), Mechanics, orthogonal machining, 021001 nanoscience & nanotechnology, ductile damage, Adiabatic shear band, 020901 industrial engineering & automation, Machining, Shear (geology), General Materials Science, catastrophic thermoplastic slip, Deformation (engineering), 0210 nano-technology, lcsh:Mining engineering. Metallurgy

وصف الملف: application/pdf

URL الوصول: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::2a6c7304e0787d5ffc812fe1fff02032
https://www.mdpi.com/2075-4701/10/3/338

المؤلفون: Hanna, Carl Robert

مصطلحات موضوعية: Orthogonal machining, Reverse residual stress model, Cutting forces, Surface integrity, Residual stresses, Strains and stresses, Cutting, Machining, Mathematical models

الاتاحة: http://hdl.handle.net/1853/19813

المؤلفون: Saifuddin MN, Saifuddin MN

المصدر: Jurnal Polimesin

مصطلحات موضوعية: orthogonal machining, obligue machining, pahat, geram, Indonesia

وصف الملف: application/pdf

Relation: https://www.neliti.com/publications/313679/analisis-mekanisme-pembentukan-geram-dan-gaya-pemotongan-pada-proses-bubut

الاتاحة: https://www.neliti.com/publications/313679/analisis-mekanisme-pembentukan-geram-dan-gaya-pemotongan-pada-proses-bubut

المؤلفون: Han, Sangil

مصطلحات موضوعية: White layer, Orthogonal machining, Workpiece surface temperature, Phase transformation, Steel Mechanical properties, Turning (Lathe work), Steel Microstructure, Machining

وصف الملف: 39348609 bytes; application/pdf

الاتاحة: http://hdl.handle.net/1853/10477

المؤلفون: Miguélez Garrido, María Henar, Zaera, Ramón, Molinari, Alan, Rusinek, Alexis

مصطلحات موضوعية: Friction, Orthogonal machining, Parametric analysis, Residual stresses, Thermomechanical coupling parameters, Ingeniería Mecánica

وصف الملف: application/pdf

Relation: http://dx.doi.org/10.1080/01495730802637134; Journal of Thermal Stresses, (Mar 2009), 32(3), 269-289; 0149-5739 (Print); 1521-074X (Online); http://hdl.handle.net/10016/15484; 269; 289; Journal of Thermal Stresses; 32

الاتاحة: http://hdl.handle.net/10016/15484
https://doi.org/10.1080/01495730802637134

المؤلفون: Geethapriyan Thangamani, Manoj Samson R., Arun Raj A. C., Senkathi S., Gunasekar C.

المساهمون: Thangamani, Geethapriyan, R., Manoj Samson, A. C., Arun Raj, S., Senkathi, C., Gunasekar

مصطلحات موضوعية: AWJM, Inconel 600, Orthogonal machining, Taguchi–Grey method, Two different abrasive grain sizes

Relation: info:eu-repo/semantics/altIdentifier/isbn/978-981-13-1723-1; info:eu-repo/semantics/altIdentifier/isbn/978-981-13-1724-8; info:eu-repo/semantics/altIdentifier/wos/WOS:000482015100044; ispartofbook:Advances in Manufacturing Processes Select Proceedings of ICEMMM 2018; International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM-2018); volume:7; firstpage:457; lastpage:469; numberofpages:13; serie:LECTURE NOTES IN MECHANICAL ENGINEERING; https://hdl.handle.net/11583/2985255; info:eu-repo/semantics/altIdentifier/scopus/2-s2.0-85054746168; https://link.springer.com/chapter/10.1007/978-981-13-1724-8_44

الاتاحة: https://hdl.handle.net/11583/2985255
https://doi.org/10.1007/978-981-13-1724-8_44
https://link.springer.com/chapter/10.1007/978-981-13-1724-8_44