المؤلفون: Jianhua Li, Peng Chen, Ning Xu, Dapeng Yang, Hongshuang Di, Hongliang Yi

المصدر: Journal of Materials Research and Technology, Vol 30, Iss , Pp 5746-5756 (2024)

مصطلحات موضوعية: Ausforming, Austempering, Bainitic ferrite, Retained austenite, Work-hardening capability, Mining engineering. Metallurgy, TN1-997

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S2238785424010263; https://doaj.org/toc/2238-7854

URL الوصول: https://doaj.org/article/ebe31e8c9f544a30b06242847eb57d8f

المؤلفون: Benrabah, Imed-Eddine, Deboer, Arina, Geandier, Guillaume, van Landeghem, Hugo, Hutchinson, Christopher, Brechet, Yves, Zurob, Hatem

المساهمون: Institut Jean Lamour (IJL), Institut de Chimie - CNRS Chimie (INC-CNRS)-Université de Lorraine (UL)-Centre National de la Recherche Scientifique (CNRS), Department of Materials Science and Engineering, McMaster University, McMaster University Hamilton, Ontario, Science et Ingénierie des Matériaux et Procédés (SIMaP), Institut de Chimie - CNRS Chimie (INC-CNRS)-Centre National de la Recherche Scientifique (CNRS)-Université Grenoble Alpes (UGA)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP), Université Grenoble Alpes (UGA), Department of Materials Science and Engineering Monash University (MSE), Monash University Clayton

المصدر: ISSN: 1359-6454 ; Acta Materialia ; https://hal.science/hal-04660489 ; Acta Materialia, 2024, 277, pp.120195. ⟨10.1016/j.actamat.2024.120195⟩.

مصطلحات موضوعية: Bainitic Ferrite, Effect of deformation, Ausforming, Dynamic transformation, [PHYS.COND.CM-MS]Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci]

الاتاحة: https://hal.science/hal-04660489
https://hal.science/hal-04660489v1/document
https://hal.science/hal-04660489v1/file/1-s2.0-S1359645424005457-main.pdf
https://doi.org/10.1016/j.actamat.2024.120195

المؤلفون: Javier Vivas, David De-Castro, Jonathan D. Poplawsky, Eberhard Altstadt, Martin Houska, Esteban Urones-Garrote, David San-Martín, Francisca G. Caballero, Marta Serrano, Carlos Capdevila

المصدر: European Journal of Materials, Vol 3, Iss 1 (2023)

مصطلحات موضوعية: creep resistant steels, thermomechanical treatment, creep fracture behaviour, microstructural degradation, small punch creep tests, ausforming, Materials of engineering and construction. Mechanics of materials, TA401-492

وصف الملف: electronic resource

Relation: https://doaj.org/toc/2688-9277

URL الوصول: https://doaj.org/article/f35302262f4d4e889ffb89d22abea4d6

المؤلفون: Pentti Kaikkonen, Sumit Ghosh, Mahesh Somani, Jukka Kömi

المصدر: Journal of Materials Research and Technology, Vol 23, Iss , Pp 466-490 (2023)

مصطلحات موضوعية: Ausforming, Phase transformation, Nanostructured bainite, Retained austenite, Nano-twinning, Mining engineering. Metallurgy, TN1-997

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S2238785423000017; https://doaj.org/toc/2238-7854

URL الوصول: https://doaj.org/article/a71dc89262f34d969b1b99e13b4cda3e

المؤلفون: Xiaojie Zhao, Kai Zhao, Changbo Liu, Zhinan Yang, Fucheng Zhang

المصدر: Journal of Materials Research and Technology, Vol 23, Iss , Pp 637-647 (2023)

مصطلحات موضوعية: Micro-alloyed steel, Bainitic transformation, Ausforming, VN precipitates, Mining engineering. Metallurgy, TN1-997

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S2238785423000376; https://doaj.org/toc/2238-7854

URL الوصول: https://doaj.org/article/cba2a10408c145bc9de0fc823e606fa6

المؤلفون: Adriana Eres-Castellanos, Muftah Zorgani, Davood Shahriari, Radu Romanica, Jose Antonio Jimenez, Carlos Garcia-Mateo, Mohammad Jahazi

المصدر: Journal of Materials Research and Technology, Vol 18, Iss , Pp 3428-3442 (2022)

مصطلحات موضوعية: Ausforming, Deformation mode, Bainitic transformation, Thermo-mechanic physical simulators, Mining engineering. Metallurgy, TN1-997

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S2238785422005336; https://doaj.org/toc/2238-7854

URL الوصول: https://doaj.org/article/7a10d42097c345eba01b58b9543ba127

المؤلفون: Kaikkonen, P. (Pentti), Ghosh, S. (Sumit), Somani, M. (Mahesh), Kömi, J. (Jukka)

مصطلحات موضوعية: Ausforming, Nano-twinning, Nanostructured bainite, Phase transformation, Retained austenite

وصف الملف: application/pdf

الاتاحة: http://urn.fi/urn:nbn:fi-fe2023080994441

المؤلفون: Lifan Wang, Haijiang Hu, Wei Wang, Ping He, Zhongbo Li, Guang Xu

المصدر: Metals ; Volume 13 ; Issue 9 ; Pages: 1526

مصطلحات موضوعية: ausforming, stress–strain, dislocations, modeling, deformation temperature

وصف الملف: application/pdf

Relation: Metal Casting, Forming and Heat Treatment; https://dx.doi.org/10.3390/met13091526

الاتاحة: https://doi.org/10.3390/met13091526

المؤلفون: Adriana Eres-Castellanos, Javier Hidalgo, Lucia Morales-Rivas, Francisca G. Caballero, Carlos Garcia-Mateo

المصدر: Journal of Materials Research and Technology, Vol 13, Iss , Pp 1416-1430 (2021)

مصطلحات موضوعية: Bainite, Thermomechanical treatment, Ausforming, Texture, Anisotropy, Variant selection, Mining engineering. Metallurgy, TN1-997

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S223878542100510X; https://doaj.org/toc/2238-7854

URL الوصول: https://doaj.org/article/a465150dfb564a0cb05e9ae5e777331f

المؤلفون: Hui Guo, Ya-ping Fan, Zi-xuan Li, Qiang Li, Xian-ying Feng

المصدر: Journal of Materials Research and Technology, Vol 11, Iss , Pp 982-991 (2021)

مصطلحات موضوعية: Ausforming, Strain-induced transformation, Thermodynamic criteria, Austempering, Ultra-fine bainitic steel, Mining engineering. Metallurgy, TN1-997

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S2238785421000879; https://doaj.org/toc/2238-7854

URL الوصول: https://doaj.org/article/f5792b712b0947c1a016004fa1e26a2b

المؤلفون: Theerawat Kumnorkaew, Junhe Lian, Vitoon Uthaisangsuk, Wolfgang Bleck

المصدر: Journal of Materials Research and Technology, Vol 9, Iss 6, Pp 13365-13374 (2020)

مصطلحات موضوعية: Ausforming, Low-carbon CFB steel, M/A constituent, Grain refinement, Deformation temperature, Strain rate, Mining engineering. Metallurgy, TN1-997

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S2238785420317403; https://doaj.org/toc/2238-7854

URL الوصول: https://doaj.org/article/189bff7494f94d4c89b5136de1ac00c2

المؤلفون: M. Zorgani, Carlos Garcia-Mateo, M. Jahazi

المصدر: Journal of Materials Research and Technology, Vol 9, Iss 4, Pp 7762-7776 (2020)

مصطلحات موضوعية: Ausforming, Retained austenite stability, Carbide-free bainite, Martensite, Dilatometer signal, Mining engineering. Metallurgy, TN1-997

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S2238785420313284; https://doaj.org/toc/2238-7854

URL الوصول: https://doaj.org/article/447bc11688b14c879d1c247d803237a9

المؤلفون: Hui Guo, Qiang Li, Yaping Fan, Xianying Feng

المصدر: Journal of Materials Research and Technology, Vol 9, Iss 4, Pp 9206-9218 (2020)

مصطلحات موضوعية: Nanostructured bainitic steel, Ausforming strain, Retained austenite, Tensile performance, Impact toughness, Mining engineering. Metallurgy, TN1-997

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S2238785420314642; https://doaj.org/toc/2238-7854

URL الوصول: https://doaj.org/article/a0124fbe2b474ec1b267e3df573417ff

المؤلفون: H. Guo, Y.P. Fan, X.Y. Feng, Q. Li

المصدر: Journal of Materials Research and Technology, Vol 9, Iss 3, Pp 3659-3663 (2020)

مصطلحات موضوعية: Ultrafine bainitic steel, Ausforming, Bainite transformation, Prior martensite, Austempering, Tensile properties, Mining engineering. Metallurgy, TN1-997

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S2238785419321829; https://doaj.org/toc/2238-7854

URL الوصول: https://doaj.org/article/6cdc95bdfe274d9bb80f5cb6ccc451b6

المؤلفون: Theerawat Kumnorkaew, Junhe Lian, Vitoon Uthaisangsuk, Wolfgang Bleck

المصدر: Alloys; Volume 1; Issue 1; Pages: 93-115

مصطلحات موضوعية: bainitic steels, phase transformation, ausforming, carbon enrichment, activation energy, dislocation density

وصف الملف: application/pdf

Relation: https://dx.doi.org/10.3390/alloys1010007

الاتاحة: https://doi.org/10.3390/alloys1010007

المؤلفون: Liu, Man, Xu, Guang, Chen, Xin, Chen, Zhenye, Xiong, Ziliu

المصدر: Materials Research. January 2020 23(1)

مصطلحات موضوعية: Ausforming, retained austenite, transformation, microstructure, dislocation density

وصف الملف: text/html

URL الوصول: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392020000100219

المؤلفون: Behrens, Bernd-Arno, Brunotte, Kai, Petersen, Tom, Relge, Roman, Till, Michael

المصدر: Proceedings 30th Anniversary International Conference on Metallurgy and Materials

مصطلحات موضوعية: Ausforming, Forging die inserts, Metastable austenite, Wear resistance, ddc:670, Konferenzschrift

Relation: ESSN:2694-9296; http://dx.doi.org/10.15488/16920; https://www.repo.uni-hannover.de/handle/123456789/17047

الاتاحة: https://www.repo.uni-hannover.de/handle/123456789/17047
https://doi.org/10.15488/16920

المؤلفون: Behrens, Bernd-Arno, Brunotte, Kai, Petersen, Tom, Ostermeyer, Corvin, Till, Michael, Habraken, Anne-Marie

المصدر: ESAFORM 2021 - 24th International Conference on Material Forming

مصطلحات موضوعية: Ausforming, Bulk metal forming, Metastable austenite, Pulsation test, Wear, ddc:670, Konferenzschrift

Relation: http://dx.doi.org/10.15488/15089; https://www.repo.uni-hannover.de/handle/123456789/15208

الاتاحة: https://www.repo.uni-hannover.de/handle/123456789/15208
https://doi.org/10.15488/15089

المؤلفون: M. Zorgani, C. Garcia-Mateo, M. Jahazi

المصدر: Materials & Design, Vol 210, Iss , Pp 110082- (2021)

مصطلحات موضوعية: Dilatometry, Ausforming, Isothermal tempering, Cementite precipitation, Pipe diffusion, Materials of engineering and construction. Mechanics of materials, TA401-492

وصف الملف: electronic resource

Relation: http://www.sciencedirect.com/science/article/pii/S0264127521006377; https://doaj.org/toc/0264-1275

URL الوصول: https://doaj.org/article/dcbd25decf324246bf32e0466e501ccd

المؤلفون: Vivas, Javier, San-Martín, D., García Caballero, Francisca, Capdevila, Carlos

المساهمون: CSIC - Unidad de Recursos de Información Científica para la Investigación (URICI), García Caballero, Francisca, San-Martín, D., Capdevila, Carlos

مصطلحات موضوعية: Creep-resistant steels, Thermomechanical treatment, Creep fracture behavior, Microstructural degradation, Small punch creep tests, Ausforming

Relation: Publisher's version; Sí; METAL HEAT TREATMENTS; http://hdl.handle.net/10261/232470

الاتاحة: http://hdl.handle.net/10261/232470
https://doi.org/10.5772/intechopen.91931