-
1Academic Journal
المؤلفون: Kaweewongprasert, Peerapat, Phasuk, Kamolphob, Levon, John A., Eckert, George J., Feitosa, Sabrina, Valandro, Luiz F., Bottino, Marco C., Morton, Dean
مصطلحات موضوعية: titanium, implant, lithium disilicate, CAD/CAM, Abutment fatigue, stepwise, Dentistry, Health Sciences
وصف الملف: application/pdf
Relation: Kaweewongprasert, Peerapat; Phasuk, Kamolphob; Levon, John A.; Eckert, George J.; Feitosa, Sabrina; Valandro, Luiz F.; Bottino, Marco C.; Morton, Dean (2019). "Fatigue Failure Load of Lithium Disilicate Restorations Cemented on a Chairside Titanium‐Base." Journal of Prosthodontics 28(9): 973-981.; https://hdl.handle.net/2027.42/152519; Journal of Prosthodontics; International Organization for Standardization (ISO). Dentistry‐Implants‐Dynamic Fatigue Test for Endosseous Dental Implants; ISO 14801:2007; ISO: Geneva, Switzerland, 2007; Wadhwani C, Rapoport D, La Rosa S, et al: Radiographic detection and characteristic patterns of residual excess cement associated with cement‐retained implant restorations: A clinical report. J Prosthet Dent 2012; 107: 151 ‐ 157; Kapos T, Evans C: CAD/CAM technology for implant abutments, crowns, and superstructures. Int J Oral Maxillofac Implants 2014;29 Suppl:117‐136; Ferrari M, Vichi A, Zarone F: Zirconia abutments and restorations: from laboratory to clinical investigations. Dent Mater 2015; 31: e63 ‐ 76; Marchack CB: A custom titanium abutment for the anterior single‐tooth implant. J Prosthet Dent 1996; 76: 288 ‐ 291; Joda T, Bürki A, Bethge S, et al: Stiffness, strength, and failure modes of implant‐supported monolithic lithium disilicate crowns: influence of titanium and zirconia abutments. Int J Oral Maxillofac Implants 2015; 30: 1272 ‐ 1279; Kurbad A, Kurbad S: CAD/CAM‐based implant abutments. Int J Comput Dent 2013; 16: 125 ‐ 141; Elsayed A, Wille S, Al‐Akhali M, et al: Effect of fatigue loading on the fracture strength and failure mode of lithium disilicate and zirconia implant abutments. Clin Oral Implants Res 2018; 29: 20 ‐ 27; Abbo B, Razzoog ME, Vivas J, et al: Resistance to dislodgement of zirconia copings cemented onto titanium abutments of different heights. J Prosthet Dent 2008; 99: 25 ‐ 29; Lin WS, Harris BT, Zandinejad A, et al: Use of prefabricated titanium abutments and customized anatomic lithium disilicate structures for cement‐retained implant restorations in the esthetic zone. J Prosthet Dent 2014; 111: 181 ‐ 185; Mühlemann S, Truninger TC, Stawarczyk B, et al: Bending moments of zirconia and titanium implant abutments supporting all‐ceramic crowns after aging. Clin Oral Implants Res 2014; 25: 74 ‐ 81; Stimmelmayr M, Sagerer S, Erdelt K, et al: In vitro fatigue and fracture strength testing of one‐piece zirconia implant abutments and zirconia implant abutments connected to titanium cores. Int J Oral Maxillofac Implants 2013; 28: 488 ‐ 493; Foong JK, Judge RB, Palamara JE, et al: Fracture resistance of titanium and zirconia abutments: an in vitro study. J Prosthet Dent 2013; 109: 304 ‐ 312; Stimmelmayr M, Edelhoff D, Güth JF, et al: Wear at the titanium‐titanium and the titanium‐zirconia implant‐abutment interface: a comparative in vitro study. Dent Mater 2012; 28: 1215 ‐ 1220; Yilmaz B, Salaita LG, Seidt JD, et al: Load to failure of different zirconia abutments for an internal hexagon implant. J Prosthet Dent 2015; 114: 373 ‐ 377; Att W, Yajima ND, Wolkewitz M, et al: Influence of preparation and wall thickness on the resistance to fracture of zirconia implant abutments. Clin Implant Dent Relat Res 2012;14(Suppl 1): e196 ‐ 203; Kelly JR, Rungruanganunt P, Hunter B, et al: Development of a clinically validated bulk failure test for ceramic crowns. J Prosthet Dent 2010; 104: 228 ‐ 238; Lee CK, Karl M, Kelly JR: Evaluation of test protocol variables for dental implant fatigue research. Dent Mater 2009; 25: 1419 ‐ 1425; Fraga S, Pereira GKR, Freitas M, et al: Loading frequencies up to 20Hz as an alternative to accelerate fatigue strength tests in a Y‐TZP ceramic. J Mech Behav Biomed Mater 2016; 61: 79 ‐ 86; Magne P, Schlichting LH, Maia HP, et al: In vitro fatigue resistance of CAD/CAM composite resin and ceramic posterior occlusal veneers. J Prosthet Dent 2010; 104: 149 ‐ 157; Elsayed A, Wille S, Al‐Akhali M, et al: Comparison of fracture strength and failure mode of different ceramic implant abutments. J Prosthet Dent 2017; 117: 499 ‐ 506; Costa AK, Borges AL, Fleming GJ, et al: The strength of sintered and adhesively bonded zirconia/veneer‐ceramic bilayers. J Dent 2014; 42: 1269 ‐ 1276; Costa AK, Kelly RD, Fleming GJ, et al: Laminated ceramics with elastic interfaces: a mechanical advantage? J Dent 2015; 43: 335 ‐ 341; Luangruangrong P, Cook NB, Sabrah AH, et al: Influence of full‐contour zirconia surface roughness on wear of glass‐ceramics. J Prosthodont 2014; 23: 198 ‐ 205; Gibbs CH, Mahan PE, Lundeen HC, et al: Occlusal forces during chewing and swallowing as measured by sound transmission. J Prosthet Dent 1981; 46: 443 ‐ 449; Gibbs CH, Mahan PE, Mauderli A, et al: Limits of human bite strength. J Prosthet Dent 1986; 56: 226 ‐ 229; Haraldson T, Carlsson GE, Ingervall B: Functional state, bite force and postural muscle activity in patients with osseointegrated oral implant bridges. Acta Odontol Scand 1979; 37: 195 ‐ 206; Rocca GT, Sedlakova P, Saratti CM, et al: Fatigue behavior of resin‐modified monolithic CAD‐CAM RNC crowns and endocrowns. Dent Mater 2016; 32: e338 ‐ e350; Campos F, Valandro LF, Feitosa SA, et al: Adhesive cementation promotes higher fatigue resistance to zirconia crowns. Oper Dent 2017; 42: 215 ‐ 224; Adell R, Lekholm U, Rockler B, et al: A 15‐year study of osseointegrated implants in the treatment of the edentulous jaw. Int J Oral Surg 1981; 10: 387 ‐ 416; den Hartog L, Slater JJ, Vissink A, et al: Treatment outcome of immediate, early and conventional single‐tooth implants in the aesthetic zone: a systematic review to survival, bone level, soft‐tissue, aesthetics and patient satisfaction. J Clin Periodontol 2008; 35: 1073 ‐ 1086; Pjetursson BE, Tan K, Lang NP, et al: A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years. Clin Oral Implants Res 2004; 15: 654 ‐ 666; Jung RE, Pjetursson BE, Glauser R, et al: A systematic review of the 5‐year survival and complication rates of implant‐supported single crowns. Clin Oral Implants Res 2008; 19: 119 ‐ 130; Jung RE, Sailer I, Hämmerle CH, et al: In vitro color changes of soft tissues caused by restorative materials. Int J Periodontics Restorative Dent 2007; 27: 251 ‐ 257; Sailer I, Zembic A, Jung RE, et al: Single‐tooth implant reconstructions: esthetic factors influencing the decision between titanium and zirconia abutments in anterior regions. Eur J Esthet Dent 2007; 2: 296 ‐ 310; Belser UC, Grütter L, Vailati F, et al: Outcome evaluation of early placed maxillary anterior single‐tooth implants using objective esthetic criteria: a cross‐sectional, retrospective study in 45 patients with a 2‐ to 4‐year follow‐up using pink and white esthetic scores. J Periodontol 2009; 80: 140 ‐ 151; Fürhauser R, Florescu D, Benesch T, et al: Evaluation of soft tissue around single‐tooth implant crowns: the pink esthetic score. Clin Oral Implants Res 2005; 16: 639 ‐ 644